MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR
The Arduino Mega 2560 R3 is an open source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip.The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins. Perfect for use in various electronics projects in India, MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR ensures reliability and performance. Ideal for various electronics projects, MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR offers quality and performance.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
MG995 Based Door Lock Mechanism (Without Servo Motor)-(033)
✔️ MG995 Servo Motor Powered – Provides strong and reliable locking with precise movement.
✔️ Easy Integration – Compatible with Arduino, Raspberry Pi, and other microcontrollers.
✔️ Low Power Consumption – Operates efficiently with a 5V-7.2V power supply.
✔️ Multiple Control Options – Can be triggered via keypad, RFID, Bluetooth, or WiFi.
✔️ Durable & Lightweight – 3D-printed housing for sturdy and compact design.
✔️ Easy Installation – Pre-drilled mounting holes for quick and secure setup.
✔️ Easy Integration – Compatible with Arduino, Raspberry Pi, and other microcontrollers.
✔️ Low Power Consumption – Operates efficiently with a 5V-7.2V power supply.
✔️ Multiple Control Options – Can be triggered via keypad, RFID, Bluetooth, or WiFi.
✔️ Durable & Lightweight – 3D-printed housing for sturdy and compact design.
✔️ Easy Installation – Pre-drilled mounting holes for quick and secure setup.
4 Channel Logic Level Converter
USB to RS485 Converter Adapter Module
Applications :
- All kinds with RS485 port device parameter settings, data communication
- LED display of communication data
- Machine PLC data reading and writing
- Monitoring data read and write, and PTZ control
- Centralized control of household electrical appliances
- Access Control System card
Features :
- FullycompliantUSB2.0standard,backwardcompatiblewithUSB1.1
- SupportSystem:WindowsXP,Vista,Windows7,Linux,MacOS,andWinCE5.0drive
- Supports Plug, Play and hot-swap(USB side);
- BetterthanusingCH341DchiporsimilarchiptosupportthelaptopUSBport.
- Communicationdistanceupto1.2KM,withthe anti-jamming performance of the industrial site
- No need external power, powered by USB port.
Ardui Mega 2560 PRO MINI Development Board
Specification
- Microcontroller : ATmega 2560
- USB-TTL converter : CH340g
- Power Out : 5 Volt - 800mA
- Power IN. : 5 Volt
- Power IN. VIN/DC Jack : 5 Volt
- Power Consumption :5 Volt, 220mA
- Logic Level : 5 Volt
- USB : Micro USB
- Clock Frequency : 16MHz
- Operating Supply Voltage : 5 Volt
- Digital I/O: 54
- Analog I/O : 16
- Memory Size : 256kb
- Data RAM Type/Size : 8Kb
- Data ROM Type/Size : 4Kb
- Interface Type : ISP
- Operating temperature : 40/+85
ATTINY85 USB Development Board
Specification
-
- Support for the IDE 1.0+ (OSX / Win / Linux)
- Power via USB or External Source - 5V or 7 -35V (automatic selection)
-
- On-board 500ma 5V Regulator
-
- Built-in USB(and serial debugging)
-
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB)
-
- 8k Flash Memory (about 6K after bootloader)
-
- I2C and SPI(vis USI)
-
- PWM on 3 pins (more possible with Software PWM)
-
- ADC on 4 pins
-
- Power LED and Test/ Status LED (on Pin0)
-
- Weight : 4g
GY-906 MLX90614ESF Temperature Sensor Module
Specification
-
- Small size, low cost
-
- Mounted on a breakout board with two types of pins
-
- 10k Pull up resistors for the I2C interface with optional solder jumpers
-
- Easy to integrate
-
- Factory calibrated in wide temperature range
-
- -40 125C for sensor temperature and
-
- -70 380C for object temperature.
-
- High accuracy of 0.5C over wide temperature range
-
- (0,50 C for both Ta and To) High (medical) accuracy calibration
-
- Measurement resolution of 0.02C
-
- Single and dual zone versions
-
- SMBus compatible digital interface
-
- Customizable PWM output for continuous reading
-
- Simple adaptation for 816V applications
-
- Sleep mode for reduced power consumption
-
- Different package options for applications and measurements versatility
-
- Automotive grade
Micro SD Card Module
Specification
- Support Micro SD Card, Micro SDHC card (high-speed card)
- The level conversion circuit board that can interface level is 5V or 3.3V
- Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit boar
- Communication interface is a standard SPI interface.
- 4 M2 screw positioning holes for easy installation.
DRV8833 2 Channel DC Motor Driver
Features:
- Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
- Operating voltage: 2.7V to 10.8V
- Output current: 1.2A continuous (2A peak) per motor
- Motor outputs can be paralleled to deliver 2.4A continuous (4A peak) to a single motor
- Inputs are 3V- and 5V-compatible
- Under-voltage lockout and protection against over-current and over-temperature
- Reverse-voltage protection circuit
- Current limiting can be enabled by adding sense resistors (not included)
Servo Motor Pan-Tilt Setup (*Servo Motor Not Include) – 051
Features:
- PV Nylon Head Two Axial plastic
- Two axial platform
- Anti-vibration
- lightweight
- Good design and shape
- Pan and tilt using simple PPM interface using RC servos with position control.
- 180 Degree of freedom on both axis.
