Welcome to Smartxprokits| Get Flat 10% Use code- *NEW10* and Free delivery on orders above Rs 900.

Cart

Cart

Your Cart is Empty

Back To Shop

Cart

Cart

Your Cart is Empty

Back To Shop

Category: Robotic

Robotic

Showing 1–16 of 42 results

  • DC Motor – 100RPM – 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.

    Add to cart
  • The BO Series1 100RPM DC Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors.

    Add to cart
  • Specification

    • Shaft length: 7 mm
    • Motor Design: Straight Dual Shaft
    • Shaft Diameter: 5.5 mm
    • Size: 55 x 48 x 23 mm.
    • Operating Voltage: 3 to 12V.
    • Current (without loading): 40-180mA.
    • RPM: 100 rpm.
    • Output Torque: 0.35 kg cm.
    Add to cart
    • These motors are simple DC Motors featuring gears for the shaft for obtaining the optimal performance characteristics. They are known as Center Shaft DC Geared Motors because their shaft extends through the center of their gearbox assembly.
    • These standard size DC Motors are very easy to use. Also, you don’t have to spend a lot of money to control motors with an Arduino or compatible board. The L298N H-bridge module with an onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC.
    • This 12V DC Motor – 200RPM can be used in all-terrain robots and a variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.
    • Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheels.
    • These DC Geared motors with robust metal/Plastic gearbox for heavy-duty applications, available in the wide RPM range(Check the list below) and ideally suited for robotics and industrial applications.
    Add to cart
    • The 12V 4010 Cooling Fan for 3D Printer is Small but powerful exhaust cooling is designed for the 3D printer. It has two pin connector to connect in a printer controller. Fan operates at 12V supply and operates automatically by the Printer controller system. It is used to mount on extruders to maintain the temperature of an extruder for seamless printing

    Features:

    1. Perfectly fit on the extruder
    2. Noiseless Performance
    3. Very low Current consumption
    4.  Easy to install and connect.
    5. Long Connecting Wire
    Add to cart
  • DC Motor – 2000RPM – 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.

    Add to cart
  • DC Motor – 300RPM – 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.

    Add to cart
  • A DC geared motor is basically a simple DC motor with a gear box attached to it.

    The speed of the motor is counted in terms of Rotations per minute or RPM. The main advantage of using the gear assembly is that it reduces the motor speed moreover it helps in increasing the motors torque.

    DC geared motor is used in variety of Robotic Applications and is available in various RPM. These DC geared motors have a 3 mm drill hole in the middle of the shaft thus making it simple to connect it to the wheel or any other mechanical assembly

    Add to cart
  • DC Motor – 60RPM – 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.

    Read more
  • The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling).

    Read more
  • This Chassis board is widely used as a  mechanical frame structure of the mobile robots. It is the backbone of the robot, where we arrange and connect everything like motors, sensors, and wheels. It gives you the base to build our robot and allow you place your components according to requirements

    Add to cart
  • Specifications of 200 RPM Dual Shaft BO Motor – Straight:-

    • Shaft length: 7 mm
      Motor Design: Straight Dual Shaft
    • Shaft Diameter: 5.5 mm
    • Size: 55 x 48 x 23 mm.
    • Operating Voltage: 3 to 12V.
    • Current (without loading): 40-180mA.
    • RPM: 200 rpm.
    • Output Torque: 0.35 kg cm.
    Add to cart
  • A DC motor clamp or a bracket is used to mount the motor tightly on any solid surface. Thus it increases the usability of the motor & makes motor mounting very convenient. This clamp or mount bracket is designed for DC Geared Motors

    Add to cart
  • A submersible pump (or sub pump, electric submersible pump (ESP)) is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. The main advantage of this type of pump is that it prevents pump cavitations’, a problem associated with a high elevation difference between pump and the fluid surface. Small DC Submersible water pumps push fluid to the surface as opposed to jet pumps having to pull fluids. Submersibles are more efficient than jet pumps.

    Add to cart
  • Specification

    • Operating Voltage Range: 3 to 6VDC
    • Maximum RPM: 10000
    • Shaft Diameter: 1.65mm
    • Weight: 15 gm per motor
    Add to cart
  • Specification

    Input Supply Voltage (VDC)8.2 ~ 42
    Current Handling Capacity (A)2.2
    Continuous Current (A)1.5 (per phase)
    Logic Input (V)2.5 ~ 5
    Length (mm)15
    Width (mm)20
    Weight (gm)4
    Shipment Weight0.005 kg
    Shipment Dimensions4 × 4 × 4 cm
    Add to cart

Cart

Cart

Your Cart is Empty

Back To Shop
Open chat