>>All Product cost are inclusive of GST , NO HIDDEN COST<< |Get Flat 5% Use code- *FLAT5* and Free delivery on orders above Rs 900 | * Single Delivery charges for Multiple Items *

Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop

Category: Hardware

Hardware

Showing 1–16 of 21 results

    • Liquid flux removers for your soldering projects. Our no-clean liquid flux has superior fluxing ability — after soldering the residue is non-corrosive, non-conductive, and moisture- and fungus-resistant. Circuit Specialists carry the liquid flux removers with variable valves that enable you to control the rate of flow for cleaning all types of ionic soils left over after you solder.
    • Very high quality professional, non-corrosive and non-conductive flux. Ideal for all soldering applications. It causes no damage to PCB’s even if a residue is left on after soldering. Soldron flux cleaning liquid is ideal to clean residual flux from the PCB.
    Purchase & earn 75 SmartX Rewards Coin!Add to cart
  • 25 Watt Soldering Iron

    77.00

    This is 25 Watt Soldering Iron with LED Power Indicator. This Soldering Iron also called as Soldering Gun is rated for 25 watts. If you are a student or hobbyist and you are looking for a good general purpose Soldering Iron then this 25-watt Noel Soldering Iron is perfect for you.

    Purchase & earn 77 SmartX Rewards Coin!Add to cart
  • 2×3 Inch Zero PCB Board

    15.34

    PCB Board Universal – Perforated 2×3 (cm) General purpose board primarily used for components & IC for quick testing, sample circuite, experiments, learning etc.

    Purchase & earn 15 SmartX Rewards Coin!Add to cart
  • 31 in 1 Universal Multifunction Portable Screwdriver Set

    115.05

    Specification

      • Connector : XY128 PCB Terminal Block
      • Termination : Screw
      • No. of Contacts : 3
      • Voltage(V) : 300
      • Allowed Wire Size (AWG) : 24 ~ 12
      • Operating Current (A) : 15 Ampere
      • Mounting Type : Through Hole
      • Pin Spacing (mm) : 5.08
    Purchase & earn 115 SmartX Rewards Coin!Add to cart
  • Big Size compactable Hot Melt Glue Gun Sticks

    11.00

    This is a Hot Melt Glue Stick also called as Glue Stick pr Hot Melt Adhesive it is used with Glue Guns. The glue is tacky when hot, and solidifies in a few seconds to one minute.

    Purchase & earn 11 SmartX Rewards Coin!Add to cart
  • Continuity Tester Checker with Light Multipurpose Tool

    49.00

    A multi-purpose, handy tool to determine the continuity of a circuit, diode, electronic components like consumer appliances, wrist watches, aerials, coils etc

    Purchase & earn 49 SmartX Rewards Coin!Add to cart
  • DC 12V KK-P40/25 30KG Lifting Solenoid Electromagnet

    590.00

    Specification

    Model12V KK-P40/25
    Holding/ Suction Force (KG)35
    Operating Voltage (VDC)12
    Max. Operating Current (mA)0.34
    Power Consumption (Watt)4
    Operating Temperature Range (C)-20 to 120
    Cable Length (cm)28
    Bolt SizeM5
    Body MaterialMild Steel
    Dimensions in mm (LxWxH)40 x 25 (Dia x Length)
    Weight (gm)193
    Purchase & earn 590 SmartX Rewards Coin!Add to cart
  • Specification

    • Body Material : Iron
    • Item color : Golden tone
    • Rated voltage : DC 12V.
    • Rated current : 0.80A.
    • Power : 9.6 Watt
    • Holding force : 0.25kg
    • Energized forms : intermittent
    • Unlocking time : 1S
    • Weight : 150 gm
    • Dimensions : 54 x 42 x 28 mm (LxWxH)
    • Cable length : 20 cm
    Purchase & earn 391 SmartX Rewards Coin!Add to cart
  • Desoldering Pump

    75.00

    This is a manually operated high quality desoldering Pump also known as solder sucker. The de-solder pump is applied to heated solder connection then operated in such a way that is sucks the melted solder into it.

    Purchase & earn 75 SmartX Rewards Coin!Add to cart
    • 3 ½ Digits LCD Display
    • Clamp Max Saw size : 35 mm
    • Full function protection ,anti high voltage circuit design
    • Data Hold
    • Low Battery Indication
    • Max. measuring capacitance
    • Diode: Open Voltage : 1.5V, Test Current : 0.5mA
    • Continuity: Buzzer Sound at less than 10W
    • Standard Accessories : Test Leads, Manual, TP01 Temperature probe
    • Dimensions : 230(H) x 80(W) x 37(D)mm
    Purchase & earn 480 SmartX Rewards Coin!Read more
  • A multimeter or a multitester, also known as a VOM (Volt-Ohm meter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter would include basic features such as the ability to measure voltage, current, and resistance.

    Purchase & earn 199 SmartX Rewards Coin!Add to cart
  • Fuse Holder -30mm

    46.02

    Fuses in Fuse Holders are ease to change quickly. It is used to mount and protect fuses. Fuse holders are used in various application like in consumer electronics, industrial, telecom, automotive etc. These are generally panel mountable fuse holders. Features and Specifications:-   Panel mounting etc. Fuse retaining insulation cover Enclosed contacts Permissible Temp. With …

    Fuse Holder -30mmRead More

    Purchase & earn 46 SmartX Rewards Coin!Read more
  • GLUE GUN 40W Hot Melt Glue Gun Kit for Quick Repairs

    437.00

    This is multipurpose Standard Temperature 40 Watt Hot Melt Glue Gun with Superior quality and user-friendly Glue Gun consists of a trigger that is pressed by the user to spray the Hot melted glue liquid adhesives on the surface of the broken items. This glue sprayers can extensively be used in the toys, home appliances, furniture, fancy items, packaging, shipping companies as well as in DIY projects by hobbyist people and others.

    Purchase & earn 437 SmartX Rewards Coin!Add to cart
  • Heat Sink PI49 TO-220

    12.27

    Black Anodized Heatsink to dissipate heat from any TO-220 package like 7805 voltage Regulators, Mosfets, transistors, etc. Generally used to keep voltage regulators and motor drivers cool, efficient and increases reliability of the components.

    Purchase & earn 12 SmartX Rewards Coin!Add to cart
  • Multitec 07 Heavy Duty Nipper with cushioned grips for cutting copper and aluminum conductors. This is made of high carbon alloy steel and induction hardened for longer life. It is suitable for electronics, telecommunications, computers, and PCB assemblies.

    If you have just started soldering or are planning to learn to solder then this is a very important tool for you. This instrument has various names normally it is called a cutter, side cutter or lead cutter. It is normally used to cut wire or leads (legs) of components also they can be used to strip the insulation off of a wire.

    Purchase & earn 78 SmartX Rewards Coin!Read more
  • This Multitec 150b Wire Stripper and Cutter is a High-grade alloy steel stripper/cutter ideal for professionals. The tool is suitable for the flush cutting action. The tool is mainly used to strip and cut the wire with a 12-24 gauge. The black oxide finish prevents corrosion. Based on the wire size, screws have to be adjusted.

    Purchase & earn 55 SmartX Rewards Coin!Add to cart

Cart

Your Cart is Empty

Back To Shop