Welcome to Smartxprokits| Get Flat 5% Use code- *FLAT5* and Free delivery on orders above Rs 900.

Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop

Category: Electronic

Electronic

Showing 1–16 of 536 results

  • Features

    • Low gate charge ( typical 16nC)
    • Fast switching
    • 100% avalanche tested
    • Improved dv/dt capability

    Add to cart
  • 0.001uf 50V Ceramic Capacitor

    1.00

    A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications

    Add to cart
  • 0.0022uf 50V Ceramic Capacitor

    1.00

    A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications

    Add to cart
  • 0.0033uf 50V Ceramic Capacitor

    1.00

    A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications

    Add to cart
  • A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications

    Add to cart
  • 0.1ohm Resistor – 5 Watt

    10.00

    A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.

    (Note: Product Images are shown for illustrative purposes only and may differ from actual product.)

    Add to cart
  • 0.1uf 50V Ceramic Capacitor

    1.06

    A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications

    Add to cart
  • 0.22 ohm Resistor – 5 Watt

    10.00

    A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.

    (Note: Product Images are shown for illustrative purposes only and may differ from actual product.)

    Add to cart
  • 0.33 ohm Resister -5 Watt

    10.00

    A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.

    Add to cart
  • 0.39 ohm 10w Resistor

    13.80

    resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.

    Add to cart
  • 0.5W 15V zener voltage regulator diode

    1.00

    Used in Voltage protection circuits Can be used as low current voltage regulator Input voltage protection for Microcontrollers or other IC’s Voltage stabilizing circuits

    Add to cart
  • Specifications:

    Display Size0.91 Inch
    Resolution128 x 32 Pixels
    Controlling ChipSSD1306
    Display Area22.384 x 5.584mm
    Driving Voltage3-5V
    Interface TypeIIC
    Operating Temperature-40~70 Celsius
    Pixel ColorWhite
    Length (mm)38.0
    Width (mm)12.0
    Height (mm)2.6
    Weight (gm)3
    Add to cart
    • The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes display board,display, 4 pin male header pre-soldered to board.
    • OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
    • OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
    Add to cart
  • 1-Channel Solid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototropic coupler to turn it ON and OFF.

    Add to cart
  • 1 ohm Resister -5 Watt

    10.03

    A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.

    Add to cart
    • This is small 1.3″ I2C interface OLED 128×64 dot matrix Display module. This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino or any Microcontroller project. The connection of this display with Arduino is made through I2C interface.
    • The SH1106 1.3 Inch 128×64 OLED Display Screen Module produces blue text on black background with very good contrast when supplied with DC 3.3 Volts to 5 Volts supply. The OLED Display Modules also offers a very wide viewing angle of about greater than 160°
    Add to cart

Cart

Your Cart is Empty

Back To Shop
Open chat