Category: IC and Chips
IC and Chips
Showing 1–16 of 50 results
- Add to cart
Features:-
- New revolutionary high voltage technology
- Ultra low gate charge
- Periodic avalanche rated
- Extreme dv/dt rated
- High peak current capability
- Improved transconductance
2SB 688 -120V, -8A Transistor PNP
₹41.51 + GSTAdd to cartSpecification Type Designator: 2SB688. Material of Transistor: Si. Polarity: PNP. Maximum Collector Power Dissipation (Pc): 80 W. Maximum Collector-Base Voltage |Vcb|: 120 V. Maximum Collector-Emitter Voltage |Vce|: 120 V. Maximum Emitter-Base Voltage |Veb|: 5 V. Maximum Collector Current |Ic max|: 8 A. Max. Operating Junction Temperature (Tj): 150 ?C. Transition Frequency (ft): 5 MHz. Collector …
- Add to cart
MAX232 is a communication IC. It is used to convert TTL Signals to RS232 Signal and vice versa.?MAX232?provides RS-232 voltage level outputs (approx. ? 7.5 V) from a single + 5 V supply via on-chip charge pumps and external capacitors. This makes it useful for implementing RS-232 in devices that otherwise do not need any voltages outside the 0 V to + 5 V range, as power supply design does not need to be made more complicated just for driving the RS-232 in this case.
4033 Decade counter IC
₹43.46 + GSTAdd to cartThe HCF4033B is a monolithic integrated circuit?fabricated in Metal Oxide Semiconductor?technology available in DIP and SOP packages.?The HCF4033B consists of a 5-stages Johnson?decade counter and an output decoder which?converts the Johnson code to a 7 segment?decoded output for driving one stage in a?numerical display. This device is particularly?advantageous in display applications where low?power dissipation and/or …
74160 IC MM74HC160N 4-Bit UP Binary Counter, Synchronous – Asynchronous HC Family, 66 MHz, 2V to 6V, DIP-16
₹18.87 + GSTAdd to cartLogic Type: Counter, Decade; Direction: Up; Number of Bits per Element: 4 Number of Elements: 1; Reset: Asynchronous; Timing: Synchronous Count Rate: 66MHz; Trigger Type: Positive Edge Voltage – Supply: 2V ~ 6V; Operating Temperature: -40?C ~ 125?C Package Include: 2 x 74160 IC
74373 Octal D-Type TRI-STATE Latch
₹10.66 + GSTAdd to cartThe IC 74LS373 is?a transparent latch consists of a eight latches with three state outputs for bus organized systems applications.It is a 20 pin IC comprises of eight input data lines (D0-D7) and eight output lines (O0-O7). The OE pin was meant for Output enable and LE pin for Latch enable.
7476 Dual Master-Slave J-K Flip-Flop
₹61.50 + GSTAdd to cart- Supply Voltage : 7V
- Input Voltage : 5.5V
- Operating Free Air Temperature Range : 0?C to +70?C
- Storage Temperature Range : ?65?C to +150?C
74F138 (Decoder/Demultiplexer) DIP IC
₹36.96 + GSTAdd to cartThe F138 is a high-speed 1-of-8 decoder/demultiplexer.This device is ideally suited for high-speed bipolar memorychip select address decoding. The multiple input enablesallow parallel expansion to a 1-of-24 decoder using justthree F138 devices or a 1-of-32 decoder using four F138devices and one inverter.
- Add to cart
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
- Add to cart
7447 or 74LS47 decodes BCD into 7 Segments, which means it accepts a binary coded decimal or BCD Values as input and decoded into a pattern that drives a 7-segment for displaying digits 0 to 9, so its name is BCD to 7 segment driver or decoder. Its input is 4 lines BCD data and generates complements as output. The generation of complement data of BCD is internally so no coding or programming is required to generate it.
AMS1117-3.3V – SMD SOT-23 Package
₹8.20 + GSTAdd to cartAMS1117-3.3V, 1A, SOT-223 Voltage Regulator IC is a series of low dropout three -terminal regulators with a dropout of 3.3V at 1A load current. AMS 1117 features a very low standby current 2mA compared to 5mA of a competitor. Other than a fixed version, Vout = 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, and 12V, AMS1117 has an adjustable version, which can provide an output voltage from 1.25 to 12V with only two external resistors.
- Add to cart
Features of ATtiny85 Microcontroller
- Flash (Kbytes) :?8 Kbytes
- Pin Count :?8
- Max. Operating Freq. (MHz) :?20 MHz
- CPU :?8-bit AVR
- Number of Touch Channels :?3
- Hardware QTouch Acquisition :?No
- Max I/O Pins :?6
- Ext Interrupts :?6
- USB Interface :No
- Add to cart
- BT136?is Planar passivated very sensitive gate four quadrant?TRIAC?in a?SOT78?plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate “series D” triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.
- Add to cart
- Decade counter/decimal decode display (CD4017B)
- Binary counter/decoder
- Frequency division
- Counter control/timers
- Divde-by-N counting
- For further application information, see ICAN-6166 “COS/MOS MSI Counter and Register Design and Applications”