Category: Robotic
Robotic
Showing 17–32 of 68 results
60 RPM Single Shaft L- Shaped BO Motor
₹45.50 + GSTAdd to cartBuy nowFeatures :-
- Cost-effectiveness of the injection-molding process.
- Elimination of machining operations.
- Low density: lightweight, low inertia.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- The quietness of operation.
- Tolerances are often less critical than for metal gears, due in part to their greater resilience.
- Consistency with the trend to greater use of plastic housings and other components.
- Add to cartBuy now
A DC geared motor is basically a simple DC motor with a gear box attached to it.
The speed of the motor is counted in terms of Rotations per minute or RPM. The main advantage of using the gear assembly is that it reduces the motor speed moreover it helps in increasing the motors torque.
DC geared motor is used in variety of Robotic Applications and is available in various RPM. These DC geared motors have a 3 mm drill hole in the middle of the shaft thus making it simple to connect it to the wheel or any other mechanical assembly
6V – 12V 5 Kg-cm 60 rpm DC Metal Geared Motor
₹143.00 + GSTAdd to cartBuy nowDC Motor ? 60RPM ? 12Volts geared motors are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly.
6V ? 12V 5 Kg-cm 3.5 rpm DC Metal Geared Motor
₹182.00 + GSTAdd to cartBuy nowThe speed of the motor is counted in terms of Rotations per minute or RPM. The main advantage of using the gear assembly is that it reduces the motor speed moreover it helps in increasing the motors torque. DC geared motor is used in variety of Robotic Applications and is available in various RPM. These …
A4988 driver Stepper Motor Driver
₹75.44 + GSTAdd to cartBuy nowThe A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with built-in converter, easy to operate. It operates from 8?V to 35?V and can deliver up to approximately 1?A per phase without a heat sink or forced air flow (it is rated for 2?A per coil with sufficient additional cooling).
- Add to cartBuy now
This Chassis board is widely used as a? mechanical frame structure of the mobile robots.?It is the backbone of the robot, where we arrange and connect everything like motors, sensors, and wheels.?It gives you the base to build our robot and allow you place your components according to requirements
- Read more
Specifications of 200 RPM?Dual?Shaft BO Motor – Straight:-
- Shaft length: 7 mm
Motor Design: Straight Dual Shaft - Shaft Diameter: 5.5 mm
- Size: 55 x 48 x 23 mm.
- Operating Voltage: 3 to 12V.
- Current (without loading): 40-180mA.
- RPM: 200 rpm.
- Output Torque: 0.35 kg cm.
- Shaft length: 7 mm
Center Shaft Gear Motor L Clamp (Bracket)
₹17.00 + GSTAdd to cartBuy nowA DC motor clamp or a bracket is used to mount the motor tightly on any solid surface. Thus it increases the usability of the motor & makes motor mounting very convenient. This clamp or mount bracket is designed for DC Geared Motors
Corner Bracket 32 X 16
₹13.00 + GSTCS DC Geared Motor 6 RPM
₹162.00 + GSTAdd to cartBuy nowFeatures
- RPM: 6
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 1.2 kg-cm
- No-load current: 60 mA(Max)
- Load current: 300 mA(Max).
- gearbox covered and lubricated with lithium grease
- Requires no maintenance.
DC 6-9V Submersible and Non Submersible Mini Water Pump DC Motor High Power Project Fountain Garden Fish Tank
₹117.60 + GSTAdd to cartBuy nowA submersible pump (or sub pump, electric submersible pump (ESP)) is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped. The main advantage of this type of pump is that it prevents pump cavitations?, a problem associated with a high elevation difference between pump and the fluid surface. Small DC Submersible water pumps push fluid to the surface as opposed to jet pumps having to pull fluids. Submersibles are more efficient than jet pumps.
DC3-6V 130 DIY Toy Motor
₹20.52 + GSTAdd to cartBuy nowSpecification
- Operating Voltage Range: 3 to 6VDC
- Maximum RPM: 10000
- Shaft Diameter: 1.65mm
- Weight: 15 gm per motor
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
₹121.00 + GSTAdd to cartBuy nowSpecification
Input Supply Voltage (VDC) 8.2 ~ 42 Current Handling Capacity (A) 2.2 Continuous Current (A) 1.5 (per phase) Logic Input (V) 2.5 ~ 5 Length (mm) 15 Width (mm) 20 Weight (gm) 4 Shipment Weight 0.005 kg Shipment Dimensions 4 ? 4 ? 4 cm ESC 30 amp 30A Brushless Motor Speed Controller RC BEC ESC for Quadcopter Plane Helicopter, Drone Quadcopter Science Project
₹354.24 + GSTAdd to cartBuy nowThis is fully programmable 30A BLDC ESC with 5V, 3A BEC. Can drive motors with
continuous 30Amp load current. It has sturdy construction with 2 separate PCBs for
Controller and ESC power MOSFETs. It can be powered with 2-4 lithium Polymer batteries
or 5-12 NiMH / NiCd batteries. It has separate voltage regulator for the microcontroller for
providing good anti-jamming capability. It is most suitable for UAVs, Aircrafts and
Helicopters.