Category: Modules/Shield
Modules/Shield
Showing 33–48 of 70 results
FS1000A 433mHz Tx & Rx RF Radio Module
₹135.30 + GSTAdd to cartBuy nowThis is FS1000A 433mHz Tx RF Radio Module. This RF module comprises an RF Transmitter and an RF Receiver. The transmitter/receiver (Tx/Rx) pair operates at a frequency of 433 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4.
- Add to cartBuy now
Specification
- Small size, low cost
- Mounted on a breakout board with two types of pins
- 10k Pull up resistors for the I2C interface with optional solder jumpers
- Easy to integrate
- Factory calibrated in wide temperature range
- -40 125C for sensor temperature and
- -70 380C for object temperature.
- High accuracy of 0.5C over wide temperature range
- (0,50 C for both Ta and To) High (medical) accuracy calibration
- Measurement resolution of 0.02C
- Single and dual zone versions
- SMBus compatible digital interface
- Customizable PWM output for continuous reading
- Simple adaptation for 816V applications
- Sleep mode for reduced power consumption
- Different package options for applications and measurements versatility
- Automotive grade
HR202 Humidity Detection Sensor Module
₹45.50 + GSTAdd to cartBuy nowUsing high-quality HR202 humidity sensor. The comparator output signal is clean, good waveform, driving ability, more than 15mA The humidity sensor module is sensitive to environmental humidity, generally used to detect ambient humidity by adjusting the potentiometer, for detecting the humidity can change the threshold ( i.e. the humidity control), such as the need to …
HX711 Load Cell Amplifier Module
₹42.64 + GSTAdd to cartBuy nowHX711 module is a Load Cell Amplifier breakout board?for the HX711 IC that allows you to easily read load cells to measure weight.?This module uses 24 high precision A/D converter chip HX711. It is a specially designed for the high precision electronic scale design, with two analog input channel, the internal integration of 128 times …
ISD1820 Voice Record Module
₹131.00 + GSTAdd to cartBuy now- It can offers true single?chip voice recording, no?volatile storage, and playback capability for 8 to 20 seconds. The sample is 3.2k and the total 20s for the Recorder. This module use is very easy which you could direct control by push button on board or by Microcontroller such as Arduino, STM32, ChipKit etc. From these, you can easy control record , playback and repeat and so on.
- We have Various sizes of Audio, Sound and Voice Module. Check out our complete collection of Audio, Sound and Voice Module.
L298 Dual Full Bridge Driver
₹88.05 + GSTAdd to cartBuy nowThe?L298?is an integrated monolithic circuit in a 15- lead Multiwatt and Power SO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enable inputs are provided to enable or disable the device independently of the input signals. The emitters of the lower transistors of each bridge are connected together and the corresponding external terminal can be used for the connection of an external sensing resistor. An additional supply input is provided so that the logic works at a lower voltage.
- Add to cartBuy now
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage.
Laser Module 650NM 5V
₹39.00 + GSTAdd to cartBuy nowThe LASER MODULE 650NM 5V head is composed of a light-emitting tube, condenser lens, and adjustable copper sleeve and it is assembled when delivered, the focal length of the lens is adjusted glued by strong glue stick, which can work directly after connecting to a 5V DC power supply. Laser Diode Module is a breadboard friendly, …
LDR & Laser Based Security System Kit
₹83.02 + GSTAdd to cartBuy nowApplications :
- All kinds with RS485 port device parameter settings, data communication
- LED display of communication data
- Machine PLC data reading and writing
- Monitoring data read and write, and PTZ control
- Centralized control of household electrical appliances
- Access Control System card
?
Features :
- FullycompliantUSB2.0standard,backwardcompatiblewithUSB1.1
- SupportSystem:WindowsXP,Vista,Windows7,Linux,MacOS,andWinCE5.0drive
- Supports Plug, Play and hot-swap(USB side);
- BetterthanusingCH341DchiporsimilarchiptosupportthelaptopUSBport.
- Communicationdistanceupto1.2KM,withthe anti-jamming performance of the industrial site
- No need external power, powered by USB port.
- Add to cartBuy now
Features:
- Brightness: Normal brightness.
- Interface: common cathode red yellow green control.
- Active level: high level
MAX30102 Pulse Oximeter Heart Rate Sensor Module
₹110.50 + GSTAdd to cartBuy nowFeatures
- Integrated pulse oximetry and heart rate monitor sensor solution.
- Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End
- Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package
- Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
- Programmable Sample Rate and LED Current for Power Savings
- Ultra-Low Shutdown Current (0.7?A, typ)
- Advanced Functionality Improves Measurement Performance
- High SNR Provides Robust Motion Artifact Resilience
- Integrated Ambient Light Cancellation
- High Sample Rate Capability
- Fast Data Output Capability
MAX6675 Module with K Type Thermocouple Sensor
₹192.00 + GSTAdd to cartBuy nowProduct Description This MAX6675 Module with K Type Thermocouple Sensor Measure 1024?C Temperature sensor makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) for giving an accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. It has a 12-bit resolution providing temperature …
MAX7219 8×8 LED Dot Matrix Display Module
₹128.30 + GSTAdd to cartBuy nowhe individual module features 8?8 LED?s, each controlled very precisely by?the MAX7219 driver to generate the color pattern you wish. The great advantage of using this is users will have control over all of the 64 LED by just connecting 3 output communication wires to microcontrollers like Arduino etc.
- Add to cartBuy now
Specification
- Microcontroller : ATmega 2560
- USB-TTL converter : CH340g
- Power Out : 5 Volt – 800mA
- Power IN. : 5 Volt
- Power IN. VIN/DC Jack : 5 Volt
- Power Consumption :?5 Volt,? 220mA
- Logic Level : 5 Volt
- USB : Micro USB
- Clock Frequency : 16MHz
- Operating Supply Voltage : 5 Volt
- Digital I/O?: 54
- Analog I/O : 16
- Memory Size : 256kb
- Data RAM Type/Size : 8Kb
- Data ROM Type/Size : 4Kb
- Interface Type : ISP
- Operating temperature : ?40??/+85??
- Add to cartBuy now
The Arduino Mega 2560 R3 is an open source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip.The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.
- Add to cartBuy now
This is an armor aluminum alloy case with dual cooling fan designed for the?Raspberry Pi 4 Computer Model B. It is a great raspberry pi 4?passive cooling case?to help raspberry pi 4 board cooling down. Also a Raspberry Pi 4 Heatsink Case (Raspberry Pi 4 Case) for good heat dissaption. There are two case versions …