1240 12V Solenoid Door Lock
Features:
- Iron Body Material
- High-quality ultra-compact lock.
- Rustproof, durable, safe, and convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
- Slim design, security, and stability, low power consumption
- Designed with the open frame type and mount board, high power.
- Easy to install for the door lock or other automatic door lock systems with the mounting board.
- Adopts the principle of magnetism, when the current is through the silicon, the electromagnetic lock will achieve a strong.
TB6600 4 Ampere Stepper Motor Driver for 16 Micro-Step CNC 1 Axis
nan Perfect for use in various electronics projects in India, TB6600 4 Ampere Stepper Motor Driver for 16 Micro-Step CNC 1 Axis ensures reliability and performance. Ideal for various electronics projects, TB6600 4 Ampere Stepper Motor Driver for 16 Micro-Step CNC 1 Axis offers quality and performance.
MAX30102 Pulse Oximeter Heart Rate Sensor Module
Features
- Integrated pulse oximetry and heart rate monitor sensor solution.
- Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End
- Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package
- Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
- Programmable Sample Rate and LED Current for Power Savings
- Ultra-Low Shutdown Current (0.7A, typ)
- Advanced Functionality Improves Measurement Performance
- High SNR Provides Robust Motion Artifact Resilience
- Integrated Ambient Light Cancellation
- High Sample Rate Capability
- Fast Data Output Capability
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
Specification
| Driver IC | TM1637 |
| Input Voltage (V) | 3.3 to 5.5 |
| Max. Operating Current (mA) | 30 |
| Length (mm) | 42 |
| Width (mm) | 24 |
| Height (mm) | 12 |
| Weight (gm) | 10 |
| Shipment Weight | 0.015 kg |
| Shipment Dimensions | 5 3 2 cm |
FS1000A 433mHz Tx & Rx RF Radio Module
This is FS1000A 433mHz Tx RF Radio Module. This RF module comprises an RF Transmitter and an RF Receiver. The transmitter/receiver (Tx/Rx) pair operates at a frequency of 433 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4. Perfect for use in various electronics projects in India, FS1000A 433mHz Tx & Rx RF Radio Module ensures reliability and performance. Ideal for various electronics projects, FS1000A 433mHz Tx & Rx RF Radio Module offers quality and performance.
Finger Print Sensor Module – R307
This is the R307 Optical Fingerprint Reader Sensor Module. R307 fingerprint module is a fingerprint sensor with a TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter. The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person. Perfect for use in various electronics projects in India, Finger Print Sensor Module - R307 ensures reliability and performance. Ideal for various electronics projects, Finger Print Sensor Module - R307 offers quality and performance.
Power Bank Module – Dual USB 5V 1A 2.1A 18650 Battery Charger Module with LCD Display
Specification:
- Micro USB input: 5 V 1A
- USB output: 5V 2.1A / 5V 1A (Dual USB interface)
- Charging screen: intelligent digital screen
- Type of batteries: liquid lithium ion batteries (18650)
- Product size: 57mm x 28mm
- Screen size: 27mm x 17mm
- Input Voltage: 3.7V
Installation instructions:
- The circuit board is connected to the negative battery B-, B is positive
- Check polarity, wrong wiring will burn the board.
- the battery is connected in parallel welding.
- There is insulation between the battery and the circuit board
- The battery can not touch the circuit board, may cause short circuit if it does.
USB to TTL Serial Converter Adapter
- Single chip USB to asynchronous serial data transfer interface.
- Entire USB protocol handled on the chip. No USB specific firmware programming required.
- Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
- Fully integrated USB termination resistors.
- Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
- 128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
Ardu Nano Board ATmega328P (without solder)
MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR
The Arduino Mega 2560 R3 is an open source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip.The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins. Perfect for use in various electronics projects in India, MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR ensures reliability and performance. Ideal for various electronics projects, MEGA 2560 R3 (ATmega2560-16AU CH340G) compactable with Arduino AVR offers quality and performance.
MG995 Based Door Lock Mechanism (Without Servo Motor)-(033)
✔️ MG995 Servo Motor Powered – Provides strong and reliable locking with precise movement.
✔️ Easy Integration – Compatible with Arduino, Raspberry Pi, and other microcontrollers.
✔️ Low Power Consumption – Operates efficiently with a 5V-7.2V power supply.
✔️ Multiple Control Options – Can be triggered via keypad, RFID, Bluetooth, or WiFi.
✔️ Durable & Lightweight – 3D-printed housing for sturdy and compact design.
✔️ Easy Installation – Pre-drilled mounting holes for quick and secure setup.
✔️ Easy Integration – Compatible with Arduino, Raspberry Pi, and other microcontrollers.
✔️ Low Power Consumption – Operates efficiently with a 5V-7.2V power supply.
✔️ Multiple Control Options – Can be triggered via keypad, RFID, Bluetooth, or WiFi.
✔️ Durable & Lightweight – 3D-printed housing for sturdy and compact design.
✔️ Easy Installation – Pre-drilled mounting holes for quick and secure setup.
Ne555 12V Digital Timer Relay Module Switch | Adjustable 0 To 10 Seconds
Specifications
-
- Module Properties : NE555 chip
-
- Input voltage : DC 12 Volts
-
- Adjustable time : Within 10 seconds
-
- Dimension : 77 (L) * 23 (W) * 18 (H) mm (with potentiometer)
-
- Control voltage : AC 0~250V / max. 10A, DC 0~30V / max. 10A
-
- Max. loading : 2200W