Mega 2560 PRO MINI 5V ATmega2560-16AU NO Pin Headers Development Board For Arduino
Original price was: ₹1,949.00.₹1,320.77Current price is: ₹1,320.77. + GST
Specification
- Microcontroller : ATmega 2560
- USB-TTL converter : CH340g
- Power Out : 5 Volt – 800mA
- Power IN. : 5 Volt
- Power IN. VIN/DC Jack : 5 Volt
- Power Consumption :?5 Volt,? 220mA
- Logic Level : 5 Volt
- USB : Micro USB
- Clock Frequency : 16MHz
- Operating Supply Voltage : 5 Volt
- Digital I/O?: 54
- Analog I/O : 16
- Memory Size : 256kb
- Data RAM Type/Size : 8Kb
- Data ROM Type/Size : 4Kb
- Interface Type : ISP
- Operating temperature : ?40??/+85??
4 in stock
- This is a perfect board if you want lot of IO pins, fast processing and compact size. This is a small form factor of Arduino Mega2560 and it also has onboard USB port so you can load code directly using Arduino IDE.
- The Mega Pro Embed CH340G / ATmega2560 board is?based on the ATmega2560 microcontroller and the?USB-UART adapter CH340. The board is compatible?with Arduino Mega 2560.?The board has a compact form factor of 38 X 55 mm and?is an excellent solution for developing projects based?on ATmega2560.
- The Mega Pro Embed functionalities are identical to?the Arduino Mega 2560. Even though it is an Embed?board, it is solid stable as the Mega Board. It uses the?original chip, and a 16 MHz high-quality quartz?resonators is present on the board.?The board has a Micro USB connector that allows you?to connect the microcontroller to the computer. The module has onboard ch340g IC.
- Arduino mega pro mini can be powered directly through the Micro?USB connector, or via the corresponding contact on?the board (Vin). The used voltage regulator operates?in a range of 6 to 9 Volt DC.?The maximum output current upon 5 Volt is around?800mA, while on the 3.3 Volt it is about 800 mA.?The voltage regulator allows to use up to 12 volt as an?input value, however we do not recommend exceeding?the recommended values aforementioned, since this?can lead to excessive heat and damage the device.
12 reviews for Mega 2560 PRO MINI 5V ATmega2560-16AU NO Pin Headers Development Board For Arduino
You must be logged in to post a review.
Related products
-
Original Flex sensor 2.2 inches for Motion and Diy
Original price was: ₹400.00.₹240.50Current price is: ₹240.50. + GSTAdd to cartFlex sensors are usually available in two sizes. One is 2.2 inch and another is 4.5 inch. Although the sizes are different the basic function remains the same. They are also divided based on resistance. There are LOW resistance, MEDIUM resistance and HIGH resistance types. Choose the appropriate type depending on requirement. ?Here we are going to discuss 2.2inch Flex sensor that is FS-L-0055.
-
1N4148 -100V ,450mA | Diode Small Signal
Original price was: ₹1.18.₹0.90Current price is: ₹0.90. + GSTAdd to cartIt is one of the most popular and long lived switching diodes because of its dependable specifications and low cost. The 1N4148 is useful in switching applications up to about 100 MHz. The 1N4148 comes in a DO-35 glass package for thru-hole mounting.
-
Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module
Original price was: ₹130.00.₹97.00Current price is: ₹97.00. + GSTAdd to cartCore processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi Fi MAC/BB/RF/PA/LNA, on-board antenna. -
7476 Dual Master-Slave J-K Flip-Flop
Original price was: ₹90.00.₹61.50Current price is: ₹61.50. + GSTAdd to cart- Supply Voltage : 7V
- Input Voltage : 5.5V
- Operating Free Air Temperature Range : 0C to +70C
- Storage Temperature Range : 65C to +150C
-
BC327 PNP General Purpose Amplifier Transistor
Original price was: ₹5.00.₹1.95Current price is: ₹1.95. + GSTAdd to cartBC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
Akshay (verified owner) –
Good techinical knowledge
Devendra (verified owner) –
Very fast delivery.
Rohit (verified owner) –
Good quality.
Devendra (verified owner) –
Good service.
Devendra (verified owner) –
Very well worth the money.
Er.Prashant (verified owner) –
Best cost electronic components in India
Ketan (verified owner) –
I got my project done with these components Great Support
Vivek (verified owner) –
Online best cost electronic components
Prakash (verified owner) –
Good support and recommended
Akshay (verified owner) –
Good quality.
Sneha (verified owner) –
Good support and recommended
Sneha (verified owner) –
I got my project done with these components Great Support