-23%
TIP32C pnp transistor 100v 3a to-220 ic
Original price was: ₹20.00.₹11.48Current price is: ₹11.48. + GST
Crystal Oscillator 4 Mhz
Original price was: ₹10.00.₹6.77Current price is: ₹6.77. + GST
CD4047- Low Power Monostable/Astable Multivibrator IC DIP-14 PIN IC
Original price was: ₹18.00.₹13.94Current price is: ₹13.94. + GST
55 in stock
Description
- It requires an external capacitor?(between pins 1 and 3) and an external resistor?(between pins 2 and 3) to determine the output pulse width?in the monostable mode, and the output frequency in the?astable mode.
Astable operation is enabled by a high level on the astable?input or low level on the astable input. The output frequency?(at 50% duty cycle) at Q and Q outputs is determined?by the timing components. A frequency twice that of?Q is available at the Oscillator Output; a 50% duty cycle is?not guaranteed.
Monostable operation is obtained when the device is triggered?by LOW-to-HIGH transition at + trigger input or?HIGH-to-LOW transition at ? trigger input. The device can?be retriggered by applying a simultaneous LOW-to-HIGH?transition to both the + trigger and retrigger inputs.?A high level on Reset input resets the outputs Q to LOW, Q?to HIGH.
Reviews (23)
23 reviews for CD4047- Low Power Monostable/Astable Multivibrator IC DIP-14 PIN IC
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
1N4007 diode
1N4007 is an axial leaded general purpose rectifier in DO-41 package. This device features epoxy flame retardant, low forward voltage drop and high current capability and high reliability. Perfect for use in various electronics projects in India, 1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant ensures reliability and performance. Ideal for various electronics projects, 1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant offers quality and performance.
BC547 NPN General Purpose Transistor
BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
IR Proximity Sensor for Obstacle Sensing and Line Follower Robots
Proximity Sensorare used to detect objects and obstacles in front of sensor.
Sensor keeps transmittinginfrared lightand when any object comes near, it is detected by the sensor by monitoring the reflected light from the object. It can be used in robots for obstacle avoidance, for automatic doors, for parking aid devices or for security alarm systems, or contact less tachometer by measuring RPM of rotation objects like fan blades. Perfect for use in various electronics projects in India, IR Proximity Sensor for Obstacle Sensing and Line Follower Robots ensures reliability and performance. Ideal for various electronics projects, IR Proximity Sensor for Obstacle Sensing and Line Follower Robots offers quality and performance.
16 X 2 (1602) Yellow (Green) LCD Display
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 58 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
L298N Motor Driver Controller Board
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
5V 1 Channel Solid State Relay Board
1-ChannelSolid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototropic coupler to turn it ON and OFF. Perfect for use in various electronics projects in India, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse ensures reliability and performance. Ideal for various electronics projects, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse offers quality and performance.
Voltage Sensor Module
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
ESP-12F ESP8266 WIFI Module
Core processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi Fi MAC/BB/RF/PA/LNA, on-board antenna.
Perfect for use in various electronics projects in India, Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module ensures reliability and performance. Ideal for various electronics projects, Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module offers quality and performance.
Ketan (verified owner) –
Less cost than other websites
Harsh (verified owner) –
Good support and recommended
Prakash (verified owner) –
Very well worth the money.
Ketan (verified owner) –
Less cost than other websites
Zohar (verified owner) –
Drone parts i ordered and found ok
Lokesh (verified owner) –
Online best cost electronic components
Lokesh (verified owner) –
Good support and recommended
Harsh (verified owner) –
Good quality.
Komal (verified owner) –
Good support and recommended
Akshay (verified owner) –
Very well worth the money.
Sneha (verified owner) –
Less cost than other websites
Jayen (verified owner) –
Very well worth the money.
Vikas (verified owner) –
The product is firmly packed.
Paaji (verified owner) –
The product is firmly packed.
Viral (verified owner) –
The product is firmly packed.
Vivek (verified owner) –
Good service.
Rahul (verified owner) –
Drone parts i ordered and found ok
Vikas (verified owner) –
Very well worth the money.
Priya (verified owner) –
Best cost electronic components in India
Mayur (verified owner) –
Drone parts i ordered and found ok
Harsh (verified owner) –
Online best cost electronic components
Devendra (verified owner) –
I got my project done with these components Great Support
Devendra (verified owner) –
Good service.