-23%
TIP32C pnp transistor 100v 3a to-220 ic
Original price was: ₹20.00.₹11.48Current price is: ₹11.48. + GST
Crystal Oscillator 4 Mhz
Original price was: ₹10.00.₹6.77Current price is: ₹6.77. + GST
CD4047- Low Power Monostable/Astable Multivibrator IC DIP-14 PIN IC
Original price was: ₹18.00.₹13.94Current price is: ₹13.94. + GST
55 in stock
Description
- It requires an external capacitor?(between pins 1 and 3) and an external resistor?(between pins 2 and 3) to determine the output pulse width?in the monostable mode, and the output frequency in the?astable mode.
Astable operation is enabled by a high level on the astable?input or low level on the astable input. The output frequency?(at 50% duty cycle) at Q and Q outputs is determined?by the timing components. A frequency twice that of?Q is available at the Oscillator Output; a 50% duty cycle is?not guaranteed.
Monostable operation is obtained when the device is triggered?by LOW-to-HIGH transition at + trigger input or?HIGH-to-LOW transition at ? trigger input. The device can?be retriggered by applying a simultaneous LOW-to-HIGH?transition to both the + trigger and retrigger inputs.?A high level on Reset input resets the outputs Q to LOW, Q?to HIGH.
Reviews (23)
23 reviews for CD4047- Low Power Monostable/Astable Multivibrator IC DIP-14 PIN IC
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
3.7V 1200 mAh 18650 Lithium Rechargeable Battery
A lithium-ion battery or Li-ion battery is a type of rechargeable battery. Lithium-ion batteries are commonly used for portable electronics and electric vehicles and are growing in popularity for military and aerospace applications. Perfect for use in various electronics projects in India, 3.7V 1200 mAh Li-ion Cylindrical Battery | 3.7V Lithium Ion Battery for DIY Projects | Lithium Ion Cylindrical Battery ensures reliability and performance. Ideal for various electronics projects, 3.7V 1200 mAh Li-ion Cylindrical Battery | 3.7V Lithium Ion Battery for DIY Projects | Lithium Ion Cylindrical Battery offers quality and performance.
BC548 NPN 30V 0. 1A Transistor High quality
BC548 is another general purpose widely used transistor that can be easily get from reputable electronic components store, this transistor also have bunch of good features on the basis of which one can use it in their electronic circuit, it can handle maximum current of 500mA which is enough to drive many other components such as ICS, other transistors, portion of a circuits, relays, LEDs etc. The max collector dissipation of the device is 625 miliWatt which is another good feature to use it as a small amplifier.
HC-05 Bluetooth Module
Bluetooth module (SMD) using chipsets BlueCore4 CSR. It has seven I / O ports, 8 Mbit flash memory for software storage and two modes of operation: via AT commands and transparently. In transparent mode it can be configured as Master, Slave or Loopback, and can connect to other devices that support SPP. In the AT command mode, the user can configure the module and send commands. By controlling the logic level of pin PIO11, the user can activate the work mode between AT command and transparent. Perfect for use in various electronics projects in India, HC-05 Bluetooth Module ensures reliability and performance. Ideal for various electronics projects, HC-05 Bluetooth Module offers quality and performance.
L298N Motor Driver Controller Board
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
Crystal Oscillator 8 MHZ
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC's which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
Voltage Sensor Module
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
Original Flex sensor 2.2 inches for Motion and Diy
Flex sensors are usually available in two sizes. One is 2.2 inch and another is 4.5 inch. Although the sizes are different the basic function remains the same. They are also divided based on resistance. There are LOW resistance, MEDIUM resistance and HIGH resistance types. Choose the appropriate type depending on requirement. Here we are going to discuss 2.2inch Flex sensor that is FS-L-0055. Perfect for use in various electronics projects in India, Original Flex sensor 2.2 inches for Motion and Diy ensures reliability and performance. Ideal for various electronics projects, Original Flex sensor 2.2 inches for Motion and Diy offers quality and performance.
Ketan (verified owner) –
Less cost than other websites
Harsh (verified owner) –
Good support and recommended
Prakash (verified owner) –
Very well worth the money.
Ketan (verified owner) –
Less cost than other websites
Zohar (verified owner) –
Drone parts i ordered and found ok
Lokesh (verified owner) –
Online best cost electronic components
Lokesh (verified owner) –
Good support and recommended
Harsh (verified owner) –
Good quality.
Komal (verified owner) –
Good support and recommended
Akshay (verified owner) –
Very well worth the money.
Sneha (verified owner) –
Less cost than other websites
Jayen (verified owner) –
Very well worth the money.
Vikas (verified owner) –
The product is firmly packed.
Paaji (verified owner) –
The product is firmly packed.
Viral (verified owner) –
The product is firmly packed.
Vivek (verified owner) –
Good service.
Rahul (verified owner) –
Drone parts i ordered and found ok
Vikas (verified owner) –
Very well worth the money.
Priya (verified owner) –
Best cost electronic components in India
Mayur (verified owner) –
Drone parts i ordered and found ok
Harsh (verified owner) –
Online best cost electronic components
Devendra (verified owner) –
I got my project done with these components Great Support
Devendra (verified owner) –
Good service.