Bmp180 Digital Barometric High Precision Pressure Sensor Board Module
Applications
- Indoor navigation
- GPS-enhancement for dead-reckoning, slope detection, etc.
- Sport devices, e.g. altitude profile
- Weather forecast
- Vertical velocity indication (rise/sink speed)
ATTINY85 ic
Features of ATtiny85 Microcontroller
- Flash (Kbytes) :8 Kbytes
- Pin Count :8
- Max. Operating Freq. (MHz) :20 MHz
- CPU :8-bit AVR
- Number of Touch Channels :3
- Hardware QTouch Acquisition :No
- Max I/O Pins :6
- Ext Interrupts :6
- USB Interface :No
Ardui Mega 2560 PRO MINI Development Board
Specification
- Microcontroller : ATmega 2560
- USB-TTL converter : CH340g
- Power Out : 5 Volt - 800mA
- Power IN. : 5 Volt
- Power IN. VIN/DC Jack : 5 Volt
- Power Consumption :5 Volt, 220mA
- Logic Level : 5 Volt
- USB : Micro USB
- Clock Frequency : 16MHz
- Operating Supply Voltage : 5 Volt
- Digital I/O: 54
- Analog I/O : 16
- Memory Size : 256kb
- Data RAM Type/Size : 8Kb
- Data ROM Type/Size : 4Kb
- Interface Type : ISP
- Operating temperature : 40/+85
ATTINY85 USB Development Board
Specification
-
- Support for the IDE 1.0+ (OSX / Win / Linux)
- Power via USB or External Source - 5V or 7 -35V (automatic selection)
-
- On-board 500ma 5V Regulator
-
- Built-in USB(and serial debugging)
-
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB)
-
- 8k Flash Memory (about 6K after bootloader)
-
- I2C and SPI(vis USI)
-
- PWM on 3 pins (more possible with Software PWM)
-
- ADC on 4 pins
-
- Power LED and Test/ Status LED (on Pin0)
-
- Weight : 4g
GY-906 MLX90614ESF Temperature Sensor Module
Specification
-
- Small size, low cost
-
- Mounted on a breakout board with two types of pins
-
- 10k Pull up resistors for the I2C interface with optional solder jumpers
-
- Easy to integrate
-
- Factory calibrated in wide temperature range
-
- -40 125C for sensor temperature and
-
- -70 380C for object temperature.
-
- High accuracy of 0.5C over wide temperature range
-
- (0,50 C for both Ta and To) High (medical) accuracy calibration
-
- Measurement resolution of 0.02C
-
- Single and dual zone versions
-
- SMBus compatible digital interface
-
- Customizable PWM output for continuous reading
-
- Simple adaptation for 816V applications
-
- Sleep mode for reduced power consumption
-
- Different package options for applications and measurements versatility
-
- Automotive grade
5A FUSES 5A FUSE GLASS 5 X 20 mm
Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Perfect for use in various electronics projects in India, 5A FUSES 5A FUSE GLASS 5 X 20 mm ensures reliability and performance. Ideal for various electronics projects, 5A FUSES 5A FUSE GLASS 5 X 20 mm offers quality and performance.
Helical Vertical Wind Turbine – 3D Printed DIY Kit with Generator Motor & LED – (086)
Build your own vertical wind turbine with this DIY kit. Includes 3D printed parts, 1N generator motor, 1m wire, and 10mm red LED. Ideal for STEM projects.
🔹 Contents of the Box:
-
3D Printed Helical Turbine Blades (10 cm size)
-
1 × 1 RS775 / 777 12V  DC Motor
-
1 × 1 Rainbow wire
-
1 × 10mm Red LED
- Instruction VideoHow to Make -https://www.youtube.com/watch?v=KYsUZsQmsBI
DIY Mini CNC Laser Engraver – 3D Printed Parts Only (Electronics Not Included) – 075
Get 3D printed parts for building your DIY Mini CNC Laser Engraver. Perfect for engraving and drawing tasks. Electronics not included.
Package Includes:
-
3D printed structural parts Only
We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
Adjustable Sensor Holder For Industrial Automation
-
- Adjustable Design: Allows fine-tuning of sensor position for optimal accuracy.
- Universal Compatibility: Fits various industrial sensors.
- 3D Printed Durability: Made from high-strength PETG/PLA for industrial use.
- Easy Installation: Includes mounting slots for quick setup.
- Stable & Reliable: Reduces vibrations and misalignment.
Rack and Pinion (For MG995 Motor) For Industrial Automation (Rack Length 285mm) – 027
- Material: Durable PLA – strong, lightweight, and eco-friendly
- Rack Size: 285 mm – designed for precise linear motion with MG995 motors
- Compatibility: Specifically engineered for MG995 servo motors
- Design: Precision-crafted for smooth operation and minimal backlash
- Applications: Ideal for robotics, CNC machines, automation systems, and educational projectsPerfect for use in electronics projects in India, the Rack and Pinion for MG995 Motor (285mm Rack Length) - 027 ensures reliable performance and high quality.
Renewable Energy | Solar Power Mobile Charger Kit Science Project Model (Assembled), 100% Tested (Perfect for Beginners & Experts)
- Renewable Energy | Solar Power Mobile Charger Kit (Assembled), 100% Tested.
- Complete documentation: Circuit diagrams, PCB layouts, and testing details included.
- Watch easy-to-follow video tutorials on YouTube for quick assembly guidance.
- https://youtu.be/Wg6DzF8rmfo?si=Tt9pn1DoXcbr_wI-
- 100% Support available on working days (11 AM – 6 PM), email: Smartxbrains@gmail.com.
- Fastest delivery across India. Ideal for electronics projects, Renewable Energy | Solar Power Mobile Charger Kit ensures reliable performance and sustainability.
