LM393 Photosensitive LDR Light-Dependent Control Sensor Module
ThisLM393 Photosensitive Light Dependent Sensor Moduleis using a high-quality LM393voltage comparator. Easy to install using the sensitive type photosensitive resistance sensor thecomparator output signal gives a clean and good waveform. Perfect for use in various electronics projects in India, LDR Light Sensor Module Photosensitive Based on LM393 for Arduino and Other MCU ensures reliability and performance. Ideal for various electronics projects, LDR Light Sensor Module Photosensitive Based on LM393 for Arduino and Other MCU offers quality and performance.
Flame Sensor Infrared Receiver Module Ignition Source Detection Module
Specification:
-
- Can detect a flame or in a 760 nanometer wavelength of ~ 1100 nm range of the light, lighter flame test distance of 80cm, for the greater flame, the farther the distance test
-
- The detection angle of 60 degrees or so, particularly sensitive to the flame spectrum
-
- Sensitivity adjustable (shown in blue digital potentiometer adjustment)
-
- The comparator output signal clean, good waveform, driving ability, more than 15mA
-
- With adjustable precision potentiometer sensitivity adjustment
-
- The working voltage of 3.3V-5V
-
- The output format : DO digital switching outputs (0 and 1) and AO analog voltage output
-
- A fixed bolt holes for easy installation
-
- Using a wide voltage LM393 comparator
Rain Drop Detection Sensor Module
Features :
- The LM393, use of the wide voltage comparator
- Provide both digital and analog output
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- The sensor uses the high-quality FR 04 double material, the large area of 5.5 * 4.0 CM
- Treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 mA;
- With potentiometer sensitivity adjustment
- The output format: digital switch output (0 and 1) and analog AO voltage output;
- Has a fixed bolt hole, convenient installation
Voltage Sensor Module
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
Vibration Sensor Module
Vibration sensor module alarm Motion sensor module vibration switch SW-420 module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can adjust using an onboard potentiometer. When this no vibration, this module output logic LOW the signal indicates LED light, and vice versa. Perfect for use in various electronics projects in India, SW420 Shock Sensor (Vibration Sensor) ensures reliability and performance. Ideal for various electronics projects, SW420 Shock Sensor (Vibration Sensor) offers quality and performance.
PS2 Joystick Module Breakout Sensor
- This is JoyStick Module PS2 Breakout Sensor very similar to the analog joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is pressdown.
- With the helpof thisJoystick Module, you can measure position coordinates on the X and Y axis by moving the hat. It also contains a switch that is press-able by pushing the hat.It also contains aswitchthat ispress-ablebypushingthe hat down. Similar to the XBOX controller.
- The X and Y axes are two 10k potentiometers which control 2D movement by generating analog signals. When the module is in working mode, it will output two analog values, representing two directions. This module uses the 5V power supply, and value, when reading through analog input, would be about 2.5V, a value will increase with joystick movement and will go up till maximum 5V; the value will decrease when the joystick is moved in other direction till 0V.
LM393 DC4-6V Sound Detection Sensor Module
- KY038 is a highly sensitive sound detection module with Analog as well as digital output. This is an arduino compatible module. Using this module you can even measure the intensity of ambient sound. Most of the digital sound sensor modulejust provides digital output i.e. if sound is present or not. But this Sound sensor module also provides and analog output voltage which is directly proportional to the intensity of the ambient sound.
- We have Various sizes of Audio, Sound and Voice Module. Check out our complete collection of Audio, Sound and Voice Module.
TTP223 Capacitive Touch Sensor Module
ZMPT101B AC Single Phase Voltage Sensor Module
ADVANTAGES of ZMPT101B AC voltage sensor
- Analog output corresponding quantity can be adjusted.
- Pcb board size : 49.5 (mm) x19.4 (mm)
- Good consistency, for voltage and power measurement
- Very efficient and accuracy
GY-521 MPU-6050 Module 3 Axis Gyroscope + Accelerometer for Arduino
e MPU6050 is a Micro Electro-Mechanical Systems (MEMS) which consists of a 3-axis Accelerometer and 3-axis Gyroscope inside it. This helps us to measure acceleration, velocity, orientation, displacement and many other motion related parameter of a system or object. This module also has a (DMP) Digital Motion Processor inside it which is powerful enough to perform complex calculation and thus free up the work for Microcontroller. Perfect for use in various electronics projects in India, GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module ensures reliability and performance. Ideal for various electronics projects, GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module offers quality and performance.
Heart Rate Pulse Sensor Module
The working of the Pulse/Heart beat sensor is very simple. The sensor has two sides, on one side the LED is placed along with an ambient light sensor and on the other side we have some circuitry. This circuitry is responsible for the amplification and noise cancellation work. The LED on the front side of the sensor is placed over a vein in our human body. This can either be your Finger tip or you ear tips, but it should be placed directly on top of a vein. Perfect for use in various electronics projects in India, Heart Rate Pulse Sensor Module ensures reliability and performance. Ideal for various electronics projects, Heart Rate Pulse Sensor Module offers quality and performance.
30A Range Electrical Parts Current Sensor Module ACS712 for Arduino
The 30A range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage. Perfect for use in various electronics projects in India, 30A Range Electrical Parts Current Sensor Module ACS712 for Arduino ensures reliability and performance. Ideal for various electronics projects, 30A Range Electrical Parts Current Sensor Module ACS712 for Arduino offers quality and performance.