5V 2A Wireless Transmitter Receiver Charging Coil Module
nan Perfect for use in various electronics projects in India, 5V 2A Wireless Power Supply Transmitter Receiver Charging Coil Module ensures reliability and performance. Ideal for various electronics projects, 5V 2A Wireless Power Supply Transmitter Receiver Charging Coil Module offers quality and performance.
SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-Band TTL
Features
- Quad-band 850/900/1800/1900MHz connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested).
- Make and receive voice calls using a headset or an external 8 speaker and electret microphone.
- PWM/Buzzer vibration motor control
- AT command interface with auto baud detection
- Send and receive SMS messages.
- Send and receive GPRS data (TCP/IP, HTTP, etc.).
- Scan and receive FM radio broadcasts.
- Lead out buzzer and vibration motor control port.
- AT command interface with auto baud detection.
- Onboard IPEX socket that can be connected to external antenna.
- Breakouts for external 8W speaker and electret mic if you dont want to use a headphone
- Level shifting circuitry so you can run it with 2.8V to 5V logic.
- Vibrational motor (buzzer) driver so you can have noiseless notifications
- uFL or SMA connections for external antenna
- Indicator LEDs for power and network connectivity
- Standard SIM slides into the back
ISD1820 Voice Record Module
- It can offers true singlechip voice recording, novolatile storage, and playback capability for 8 to 20 seconds. The sample is 3.2k and the total 20s for the Recorder. This module use is very easy which you could direct control by push button on board or by Microcontroller such as Arduino, STM32, ChipKit etc. From these, you can easy control record , playback and repeat and so on.
- We have Various sizes of Audio, Sound and Voice Module. Check out our complete collection of Audio, Sound and Voice Module.
5V 1 Channel Solid State Relay Board
1-ChannelSolid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototropic coupler to turn it ON and OFF. Perfect for use in various electronics projects in India, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse ensures reliability and performance. Ideal for various electronics projects, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse offers quality and performance.
Arduino Nano Board Enclosure Case (*Nano Board Not Included) (Plastic Parts only) – 005
- Nano Board Holder (*Nano Board Not Included)
- L x W x H = 4.7cm x 3.1cm x 1.6cm
- Material: PLA+
- Make in India Company
- Quality Tested Before ShippingPerfect for electronics projects in India, the Arduino Nano Board Enclosure Case (*Nano Board Not Included) ensures reliable performance and durability. Ideal for Arduino Nano boards, this case provides optimal protection and functionality.
Mini 0.36 Digital Voltmeter dc 4.7-32V 2 Wires Vehicles Motor Voltage Panel Meter
nan Perfect for use in various electronics projects in India, Mini 0.36 Digital Voltmeter dc 4.7-32V 2 Wires Vehicles Motor Voltage Panel Meter ensures reliability and performance. Ideal for various electronics projects, Mini 0.36 Digital Voltmeter dc 4.7-32V 2 Wires Vehicles Motor Voltage Panel Meter offers quality and performance.
4 X 4 Matrix Membrane 16 Key Switch Keypad
Specification
-
- Ultra-thin design & adhesive backing provides easy integration to any project
-
- Excellent price-performance ratio
-
- Easy communication with any microcontroller
-
- 5 pins 2.54mm pitch connector,4x 4type 16 keys.
-
- The sticker can peel off for adhesive mounting.
-
- Used widely in industrial and home electronic equipment, instrument, etc.
-
- This allows a microcontroller to scan the 8 output pins to see which of the 16 buttons is being pressed.
NRF24L01 2.4GHz Wireless Transceiver Module
- Has on board antenna. The nRF24L01 is a single chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced ShockBurst), designed for ultra low power wireless applications.
- The nRF24L01 is designed for operation in the world wide ISM frequency band at 2.400 - 2.4835GHz. An MCU (microcontroller) and very few external passive components are needed to design a radio system with the nRF24L01. The nRF24L01 is configured and operated through a Serial Peripheral Interface (SPI.) Through this interface the register map is available. The register map contains all configuration registers in the nRF24L01 and is accessible in all operation modes of the chip.
- The embedded baseband protocol engine (Enhanced ShockBurst) is based on packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Internal FIFOs ensure a smooth data flow between the radio front end and the systems MCU. Enhanced ShockBurst reduces system cost by handling all the high-speed link layer operations. The radio front end uses GFSK modulation. It has user configurable parameters like frequency channel, output power and air data rate.
- DNA Solutions has large collection of various types of Transceiver Module. Check our complete collection of Transceiver Module
ESP-12E ESP8266 WIFI Module
Features :
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as an application processor
- SDIO 1.1 / 2.0, SPI, UART
- STBC, 11 MIMO, 21 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- Access Point and Station Modes.
2.4G NRF24L01 WIRELESS MODULE WITH ANTENNA
NEO-6M GPS Module with EPROM
- This is a complete GPS module that is based on the NEO 6M GPS. This unit uses the latest technology to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
- The GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-centre software for configuring the GPS and changing the settings and much more. It is really good software (see link below).
5V 2 Channel Relay Module
Features
- The module using Songle relay control.
- AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
- Power indicator (green), Two ways of relay status indicator light (red) Using 8550 transistor-driven, strong driving ability.
- Has the fixed bolt hole and easy installation.