-55%
Portable Radiography Film Viewer 2.5″ × 8″ (200×60 mm) with Film Slider & Foot Switch – LED NDT X-Ray Viewer, Rugged Housing, Power (AC)
Original price was: ₹13,000.00.₹11,500.00Current price is: ₹11,500.00. + GST
74HC595 8-bit Shift Register IC
Original price was: ₹16.80.₹7.00Current price is: ₹7.00. + GST
Crystal Oscillator 8 MHZ
Original price was: ₹15.00.₹6.72Current price is: ₹6.72. + GST
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC’s which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
15 in stock
Description
- Crystal Case Type : Metal Can
- Crystal Mounting Type : Through Hole
- Frequency : ?8 MHz
- Frequency Stability : ? 50ppm
- Frequency Tolerance : ? 30ppm
- Load Capacitance : 10 pF
- of Pins : 2
- Operating Temperature Max : 70 ?C
- Operating Temperature Min : -10 ?C
- Operating Temperature Range : -10?C to +70?C
Reviews (1)
1 review for Crystal Oscillator 8 MHZ
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
5V Single Channel Relay Module
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side. Perfect for use in various electronics projects in India, Single Channel 5v Relay Module High Low Level Trigger ensures reliability and performance. Ideal for various electronics projects, Single Channel 5v Relay Module High Low Level Trigger offers quality and performance.
5.5mm x 2.1mm 3 Pin Female DC Power Jack Panel Mount Screw Nut Kit DC Socket Electrical Plug
- Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
- Supports DC Power Jack: 2.1 x 5.5 mm
- Diameter: 14mm
BC327 PNP General Purpose Amplifier Transistor
BC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
HC-05 Bluetooth Module
Bluetooth module (SMD) using chipsets BlueCore4 CSR. It has seven I / O ports, 8 Mbit flash memory for software storage and two modes of operation: via AT commands and transparently. In transparent mode it can be configured as Master, Slave or Loopback, and can connect to other devices that support SPP. In the AT command mode, the user can configure the module and send commands. By controlling the logic level of pin PIO11, the user can activate the work mode between AT command and transparent. Perfect for use in various electronics projects in India, HC-05 Bluetooth Module ensures reliability and performance. Ideal for various electronics projects, HC-05 Bluetooth Module offers quality and performance.
74HC595 8-bit Shift Register IC
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
Voltage Sensor Module
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
74LS76N Dual Master-Slave J-K Flip-Flop
- Supply Voltage : 7V
- Input Voltage : 5.5V
- Operating Free Air Temperature Range : 0C to +70C
- Storage Temperature Range : 65C to +150C
Jayen (verified owner) –
Good service.