“CD4017 Dip16 PIN IC” has been added to your cart. View cart
MUR1660 600V 16A Ultrafast Power Diode
₹62.00 Original price was: ₹62.00.₹27.06Current price is: ₹27.06. + GST
MJE13005A NPN Power Transistor
₹15.00 Original price was: ₹15.00.₹7.89Current price is: ₹7.89. + GST
TIP127 PNP Power Darlington Transistor 100V 5A TO-220 Package
Rated 4.57 out of 5 based on 7 customer ratings
(7 customer reviews)
₹10.00 Original price was: ₹10.00.₹7.10Current price is: ₹7.10. + GST
Specifications:-
| Transistor Polarity | PNP |
| Collector?Emitter Voltage (VCEO) | 100V |
| Collector?Base Voltage (VCBO) | 100V |
| Continuous Collector Current (Ic) | 5A |
| Continuous Base Current (Ib) | 0.12A |
| Emitter Base Voltage (VEBO) | 5V |
| Power Dissipation (Pd) | 65W |
| Operating Temperature Range | -65 – 150?C |
| DC Current Gain (hFE) | 1000 |
32 in stock
SKU:
B-3
Categories: Electronic, Transistors
Description
TIP127 is a three layer PNP device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector emitter voltage VCE.
Features:-
? Low saturation voltage
? Simple drive requirements
? High safe operating area
? For low distortion complementary designs
? Easy to carry and handle
Reviews (7)
7 reviews for TIP127 PNP Power Darlington Transistor 100V 5A TO-220 Package
Add a review Cancel reply
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
BC547 NPN General Purpose Transistor
Rated 4.00 out of 5
BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
5V Single Channel Relay Module
Rated 4.17 out of 5
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side. Perfect for use in various electronics projects in India, Single Channel 5v Relay Module High Low Level Trigger ensures reliability and performance. Ideal for various electronics projects, Single Channel 5v Relay Module High Low Level Trigger offers quality and performance.
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
Rated 5.00 out of 5
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
Crystal Oscillator 8 MHZ
Rated 4.00 out of 5
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC's which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
5V 1 Channel Solid State Relay Board
Rated 5.00 out of 5
1-ChannelSolid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototropic coupler to turn it ON and OFF. Perfect for use in various electronics projects in India, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse ensures reliability and performance. Ideal for various electronics projects, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse offers quality and performance.
DHT11 Temperature and Humidity sensor
Rated 4.67 out of 5
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Rated 5.00 out of 5
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
74LS76N Dual Master-Slave J-K Flip-Flop
Rated 5.00 out of 5
- Supply Voltage : 7V
- Input Voltage : 5.5V
- Operating Free Air Temperature Range : 0C to +70C
- Storage Temperature Range : 65C to +150C


















Komal (verified owner) –
Very well worth the money.
Er.Prashant (verified owner) –
Best cost electronic components in India
Jayen (verified owner) –
Online best cost electronic components
Devendra (verified owner) –
Good service.
Shubham (verified owner) –
Good Stem kit
Lokesh (verified owner) –
Online best cost electronic components
Sneha (verified owner) –
Online best cost electronic components