Search Results for: microcontroller
Showing 17–32 of 55 results
-
AC Yellow LED indicator 230v
Original price was: ₹40.00.₹29.52Current price is: ₹29.52. + GSTAdd to cartSpecification
- High-strength Polycarbonate lampshade material
- Indicator Lamp is anti-interference signal Lamp
- Built-in screw wire is more safe and convenient
- Colour : Yelow
- Input Voltage : 230V AC
- Mounting depth: Approx. 29mm/1.1″.
- Size : Fit for 22mm-25mm/0.86″-0.98″ diameter mounting hole, Panel Mounted
-
Turbidity Detection Sensor Kit | Liquid Water Particles Value Detection Sensor Module compatible with Arduino
Original price was: ₹1,269.00.₹817.62Current price is: ₹817.62. + GSTAdd to cartSpecifications :-
Working voltage DC 5V Working current 30mA [MAX] Response time <500 msec Insulation Resistance 100M [Min] Operating Temperature (C) -30 ~ +80 Length (mm) 33 Width (mm) 20 Height (mm) 12 Weight (gm) 55 -
Infrared Sensor Switch E18-D80NK Adjustable Proximity Sensor Switch Obstacle Avoidance Detection Sensor Switch interruptor
Original price was: ₹120.00.₹88.56Current price is: ₹88.56. + GSTRead moreProudly Made in India product , your support will help us grow the module detects the distance 2 ~ 30cm, detection angle 35 ?, the distance can detect potential is adjusted The output port OUT sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay it has …
-
0.5W 15V zener voltage regulator diode
Original price was: ₹2.00.₹0.82Current price is: ₹0.82. + GSTAdd to cartUsed in Voltage protection circuits Can be used as low current voltage regulator Input voltage protection for Microcontrollers or other IC?s Voltage stabilizing circuits
-
Compactable with NodeMCU LUA WIFI Internet Development Board Based on ESP8266 CP2102
Original price was: ₹500.00.₹253.50Current price is: ₹253.50. + GSTRead moreSpecification
- 11 b/g/n Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- CP2102 Serial / USB Chip
- +19.5dBm output power in 802.11b mode
- 4MB Flash Memory
- Integrated low power 32-bit CPU
- SDIO 1.1 / 2.0, SPI, UART
- Dimensions ? 49 x 24.5 x 13mm
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- On board USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has on board 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
- Voltage Regulator / Converter, excellent DC to DC conversion, super efficient
-
BT136 600D triac logic sensitive gate 600v 4a to220ab
Original price was: ₹10.00.₹7.00Current price is: ₹7.00. + GSTAdd to cart- BT136?is Planar passivated very sensitive gate four quadrant?TRIAC?in a?SOT78?plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate “series D” triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.
-
Crystal Oscillator 4 Mhz
Original price was: ₹10.00.₹6.77Current price is: ₹6.77. + GSTAdd to cartFeatures:
- Crystal Case Type : Metal Can
- Crystal Mounting Type : Through Hole
- Frequency :?4MHZ
- Frequency Stability: ? 50ppm
- Frequency Tolerance: ? 30ppm
- Load Capacitance: 10 pF
- No. of Pins: 2
- Operating Temperature Max: 70 ?C
- Operating Temperature Min: -10 ?C
- Operating Temperature Range: -10?C to +70?C
-
ATTINY85 ic
Original price was: ₹192.00.₹182.00Current price is: ₹182.00. + GSTAdd to cartFeatures of ATtiny85 Microcontroller
- Flash (Kbytes) :?8 Kbytes
- Pin Count :?8
- Max. Operating Freq. (MHz) :?20 MHz
- CPU :?8-bit AVR
- Number of Touch Channels :?3
- Hardware QTouch Acquisition :?No
- Max I/O Pins :?6
- Ext Interrupts :?6
- USB Interface :No
-
DC 3-5V Temperature Sensor Thermocouple Sensor for Arduino
Original price was: ₹70.00.₹54.12Current price is: ₹54.12. + GSTAdd to cartFeatures of KY 028 NTC Temprature Sensor Module
- NTC Thermistor sensor
- LM393 voltage comparator
- Mounting hole for easy installation
- Adjustable threshold via potentiometer
Specifications of?NTC Temprature Sensor Module
- Operating Voltage : 3.3 to 5 Volts
- Output Current : 15 mA
- Output Type : Digital (HIGH OR LOW)
-
Mega 2560 PRO MINI 5V ATmega2560-16AU NO Pin Headers Development Board For Arduino
Original price was: ₹1,949.00.₹1,320.77Current price is: ₹1,320.77. + GSTAdd to cartSpecification
- Microcontroller : ATmega 2560
- USB-TTL converter : CH340g
- Power Out : 5 Volt – 800mA
- Power IN. : 5 Volt
- Power IN. VIN/DC Jack : 5 Volt
- Power Consumption :?5 Volt,? 220mA
- Logic Level : 5 Volt
- USB : Micro USB
- Clock Frequency : 16MHz
- Operating Supply Voltage : 5 Volt
- Digital I/O?: 54
- Analog I/O : 16
- Memory Size : 256kb
- Data RAM Type/Size : 8Kb
- Data ROM Type/Size : 4Kb
- Interface Type : ISP
- Operating temperature : ?40??/+85??
-
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
Original price was: ₹80.00.₹61.63Current price is: ₹61.63. + GSTAdd to cartSpecification
Driver IC TM1637 Input Voltage (V) 3.3 to 5.5 Max. Operating Current (mA) 30 Length (mm) 42 Width (mm) 24 Height (mm) 12 Weight (gm) 10 Shipment Weight 0.015 kg Shipment Dimensions 5 ? 3 ? 2 cm -
ATTINY85V2 Digispark ATTiny85 USB Development Board Digistump Mini
Original price was: ₹400.00.₹210.00Current price is: ₹210.00. + GSTAdd to cartSpecification
-
- Support for the IDE 1.0+ (OSX / Win / Linux)
- Power via USB or External Source – 5V or 7 -35V (automatic selection)
-
- On-board 500ma 5V Regulator
-
- Built-in USB(and serial debugging)
-
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB)
-
- 8k Flash Memory (about 6K after bootloader)
-
- I2C and SPI(vis USI)
-
- PWM on 3 pins (more possible with Software PWM)
-
- ADC on 4 pins
-
- Power LED and Test/ Status LED (on Pin0)
-
- Weight : 4g
-
-
4 X 4 Matrix Membrane Keypad | 4×4 Matrix Keypad Membrane Switch For Arduino, Raspberry, Arm and Other MCU | 16 key switch keypad module
Original price was: ₹60.00.₹41.87Current price is: ₹41.87. + GSTAdd to cartSpecification
-
- Ultra-thin design & adhesive backing provides easy integration to any project
-
- Excellent price-performance ratio
-
- Easy communication with any microcontroller
-
- 5 pins 2.54mm pitch connector,?4x 4type 16 keys.
-
- The sticker can peel off for adhesive mounting.
-
- Used widely in industrial and home electronic equipment, instrument, etc.
-
- This allows a microcontroller to scan? the 8 output pins to see which of the 16 buttons is being pressed.
-
-
PZIN51000043 Imported St-Link V2 Programming Unit Mini Metal Shell Stm8 Stm32 Emulator Dow
Original price was: ₹450.00.₹197.00Current price is: ₹197.00. + GSTAdd to cartST-Link V2 Programmer For STM8 and STM32 is fully consistent with the official version, support for automatic upgrades, support the full range?STM32 SWD?(only 4pins including SWCLK, SWDIO, and power)?and a full range?STM8 SWIM?(only 4pins including SWIM, Reset and power) download and debug. Use this device to send program code to the 32-bit STM32 ARM Cortex …
PZIN51000043 Imported St-Link V2 Programming Unit Mini Metal Shell Stm8 Stm32 Emulator DowRead More
-
GY-906 MLX90614ESF Module, MLX90614 Contactless Temperature Sensor Module GY-906
Original price was: ₹2,000.00.₹1,062.91Current price is: ₹1,062.91. + GSTAdd to cartSpecification
-
- Small size, low cost
-
- Mounted on a breakout board with two types of pins
-
- 10k Pull up resistors for the I2C interface with optional solder jumpers
-
- Easy to integrate
-
- Factory calibrated in wide temperature range
-
- -40 125C for sensor temperature and
-
- -70 380C for object temperature.
-
- High accuracy of 0.5C over wide temperature range
-
- (0,50 C for both Ta and To) High (medical) accuracy calibration
-
- Measurement resolution of 0.02C
-
- Single and dual zone versions
-
- SMBus compatible digital interface
-
- Customizable PWM output for continuous reading
-
- Simple adaptation for 816V applications
-
- Sleep mode for reduced power consumption
-
- Different package options for applications and measurements versatility
-
- Automotive grade
-
-
0.96″ 128 X 64 Blue Light I2C OLED Screen Display Module For DIY
Original price was: ₹211.00.₹166.36Current price is: ₹166.36. + GSTAdd to cart- The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes display board,display, 4 pin male header pre-soldered to board.
- OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
- OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.