UF4007 Diode
₹4.00 Original price was: ₹4.00.₹2.00Current price is: ₹2.00. + GST
2N60 MOSFET
₹70.00 Original price was: ₹70.00.₹52.00Current price is: ₹52.00. + GST
S20K510
Rated 4.71 out of 5 based on 7 customer ratings
₹70.00 Original price was: ₹70.00.₹58.50Current price is: ₹58.50. + GST
7 in stock
SKU:
B-3
Categories: Capacitors, Electronic
Description
Advanced S20K510 EPCOS / TDK Metal Oxide Varistor Slov, For Power, Through Hole
| Maximum AC Volts | 510VAC |
|---|---|
| Maximum DC Volts | 670VDC |
| Current-Surge | 6.5kA |
| Package / Case | Disc 20mm |
| Varistor Voltage | 820V |
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
IR Proximity Sensor for Obstacle Sensing and Line Follower Robots
Rated 5.00 out of 5
Proximity Sensorare used to detect objects and obstacles in front of sensor.
Sensor keeps transmittinginfrared lightand when any object comes near, it is detected by the sensor by monitoring the reflected light from the object. It can be used in robots for obstacle avoidance, for automatic doors, for parking aid devices or for security alarm systems, or contact less tachometer by measuring RPM of rotation objects like fan blades. Perfect for use in various electronics projects in India, IR Proximity Sensor for Obstacle Sensing and Line Follower Robots ensures reliability and performance. Ideal for various electronics projects, IR Proximity Sensor for Obstacle Sensing and Line Follower Robots offers quality and performance.
5.5mm x 2.1mm 3 Pin Female DC Power Jack Panel Mount Screw Nut Kit DC Socket Electrical Plug
Rated 4.48 out of 5
- Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
- Supports DC Power Jack: 2.1 x 5.5 mm
- Diameter: 14mm
L298N Motor Driver Controller Board
Rated 5.00 out of 5
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
Green 10mm LED
Rated 4.50 out of 5
This is10mm Green LED. The size refers to the outside diameter of the LED, with 5mm being the most common LED model. 3mm LEDs are the smallest and used in tight-fitting applications. 8mm and 10mm models are used to output as much light as possible. Perfect for use in various electronics projects in India, Green 10mm LED ensures reliability and performance. Ideal for various electronics projects, Green 10mm LED offers quality and performance.
CD4017 Dip16 PIN IC
Voltage Sensor Module
Rated 4.42 out of 5
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
DHT11 Temperature and Humidity sensor
Rated 4.67 out of 5
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Rated 5.00 out of 5
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)

















