7805 Voltage Regulator IC LM7805 12v to 5v Regulator for Multiple Applications
₹9.00
LM7805Â of three terminal positive voltage regulator in the TO-220 package and with fixed positive 05 volt output. Making LM7812 useful in a wide range of applications. It employs internal current limiting, thermal shut down and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1 Ampere output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents.
200 in stock
200 in stock
- Mounting Style : Through Hole
- Number of Outputs : 1 Output
- Polarity : Positive
- Output Voltage : 05Volts
- Output Current : 1 Aampere
- Output Type : Fixed
- Input Voltage MAX : 18 V
- Input Voltage MIN : 12.2 V
- Minimum Operating Temperature : – 40 °C
- Maximum Operating Temperature : + 125°C
- Load Regulation : 180 mV
- Line Regulation : 180 mV
- Series : LM7809
- PSRR / Ripple Rejection : 71 dB
- Output Current up to 1A
- Output Voltages of 5, 6, 8, 9, 12, 15, 18, 24
- Thermal Overload Protection
- Short Circuit Protection
- Output Transistor Safe Operating Area Protection
12 reviews for 7805 Voltage Regulator IC LM7805 12v to 5v Regulator for Multiple Applications
Related products
Voltage Sensor Module 25VDC
₹61.12Add to cartThis DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input.
- Add to cart
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 5×8 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
- Add to cart
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
Add to cartThe 74HC595 consists of an 8−bit shift register and an 8−bit D−typelatch with three−state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8−bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
- Add to cart
- Decade counter/decimal decode display (CD4017B)
- Binary counter/decoder
- Frequency division
- Counter control/timers
- Divde-by-N counting
- For further application information, see ICAN-6166 “COS/MOS MSI Counter and Register Design and Applications”
Viral (verified owner) –
Very fast delivery.
Lokesh (verified owner) –
The product is firmly packed.
Ketan (verified owner) –
Very well worth the money.
Sneha (verified owner) –
Good quality.
Viral (verified owner) –
Very fast delivery.
Ayush (verified owner) –
Good quality.
Ketan (verified owner) –
Online best cost electronic components
Mayur (verified owner) –
Good service.
Viral (verified owner) –
The product is firmly packed.
Prakash (verified owner) –
Good service.
Vikas (verified owner) –
Very fast delivery.
Komal (verified owner) –
Best cost electronic components in India