MOC3063 IC - Zero-Cross Triac Opto Isolator IC
₹30.00 Original price was: ₹30.00.₹14.00Current price is: ₹14.00. + GST
LM7812 IC-12V Positive Voltage Regulator IC
₹18.00 Original price was: ₹18.00.₹15.00Current price is: ₹15.00. + GST
LM393 IC – Low Power Low Offset Voltage Dual Comparator IC
Rated 4.33 out of 5 based on 12 customer ratings
(12 customer reviews)
₹15.00 Original price was: ₹15.00.₹10.00Current price is: ₹10.00. + GST
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input c
80 in stock
SKU:
B-2
Categories: Electronic, Power Supply
Description
- Single Supply or Dual Supplies
- Wide Range of Supply Voltage
- Max Rating: 2 V to 36 V
- Tested to 30 V: Non-V Devices
- Tested to 32 V: V-Suffix Devices
- Low Supply-Current Drain Independent of Supply Voltage: 0.4 mA (Typ) Per Comparator
- Low Input Bias Current: 25 nA (Typ)
- Low Input Offset Current: 3 nA (Typ) (LM139)
- Low Input Offset Voltage: 2 mV (Typ)
- Common-Mode Input Voltage Range Includes Ground
- Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ?36 V
- Low Output Saturation Voltage
Reviews (12)
12 reviews for LM393 IC – Low Power Low Offset Voltage Dual Comparator IC
Add a review Cancel reply
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
BC547 NPN General Purpose Transistor
Rated 4.00 out of 5
BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
Rated 5.00 out of 5
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
BC327 PNP General Purpose Amplifier Transistor
Rated 4.00 out of 5
BC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
BC548 NPN 30V 0. 1A Transistor High quality
Rated 4.00 out of 5
BC548 is another general purpose widely used transistor that can be easily get from reputable electronic components store, this transistor also have bunch of good features on the basis of which one can use it in their electronic circuit, it can handle maximum current of 500mA which is enough to drive many other components such as ICS, other transistors, portion of a circuits, relays, LEDs etc. The max collector dissipation of the device is 625 miliWatt which is another good feature to use it as a small amplifier.
HC-05 Bluetooth Module
Rated 5.00 out of 5
Bluetooth module (SMD) using chipsets BlueCore4 CSR. It has seven I / O ports, 8 Mbit flash memory for software storage and two modes of operation: via AT commands and transparently. In transparent mode it can be configured as Master, Slave or Loopback, and can connect to other devices that support SPP. In the AT command mode, the user can configure the module and send commands. By controlling the logic level of pin PIO11, the user can activate the work mode between AT command and transparent. Perfect for use in various electronics projects in India, HC-05 Bluetooth Module ensures reliability and performance. Ideal for various electronics projects, HC-05 Bluetooth Module offers quality and performance.
Crystal Oscillator 8 MHZ
Rated 4.00 out of 5
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC's which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
Original Flex sensor 2.2 inches for Motion and Diy
Rated 4.48 out of 5
Flex sensors are usually available in two sizes. One is 2.2 inch and another is 4.5 inch. Although the sizes are different the basic function remains the same. They are also divided based on resistance. There are LOW resistance, MEDIUM resistance and HIGH resistance types. Choose the appropriate type depending on requirement. Here we are going to discuss 2.2inch Flex sensor that is FS-L-0055. Perfect for use in various electronics projects in India, Original Flex sensor 2.2 inches for Motion and Diy ensures reliability and performance. Ideal for various electronics projects, Original Flex sensor 2.2 inches for Motion and Diy offers quality and performance.
DHT11 Temperature and Humidity sensor
Rated 4.67 out of 5
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.


















Priya (verified owner) –
Online best cost electronic components
Rohit (verified owner) –
I got my project done with these components Great Support
Lokesh (verified owner) –
Very well worth the money.
Rohit (verified owner) –
Very fast delivery.
Komal (verified owner) –
Very fast delivery.
Akshay (verified owner) –
Online best cost electronic components
Mayur (verified owner) –
Very well worth the money.
Rohit (verified owner) –
Very well worth the money.
Harsh (verified owner) –
Good support and recommended
Prakash (verified owner) –
Very fast delivery.
Viral (verified owner) –
Very well worth the money.
Zohar (verified owner) –
Very well worth the money.