-33%
MOC3063 IC - Zero-Cross Triac Opto Isolator IC
Original price was: ₹30.00.₹14.00Current price is: ₹14.00. + GST
LM7812 IC-12V Positive Voltage Regulator IC
Original price was: ₹18.00.₹15.00Current price is: ₹15.00. + GST
LM393 IC – Low Power Low Offset Voltage Dual Comparator IC
Original price was: ₹15.00.₹10.00Current price is: ₹10.00. + GST
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input c
80 in stock
Description
- Single Supply or Dual Supplies
- Wide Range of Supply Voltage
- Max Rating: 2 V to 36 V
- Tested to 30 V: Non-V Devices
- Tested to 32 V: V-Suffix Devices
- Low Supply-Current Drain Independent of Supply Voltage: 0.4 mA (Typ) Per Comparator
- Low Input Bias Current: 25 nA (Typ)
- Low Input Offset Current: 3 nA (Typ) (LM139)
- Low Input Offset Voltage: 2 mV (Typ)
- Common-Mode Input Voltage Range Includes Ground
- Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ?36 V
- Low Output Saturation Voltage
Reviews (12)
12 reviews for LM393 IC – Low Power Low Offset Voltage Dual Comparator IC
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
3.7V 1200 mAh 18650 Lithium Rechargeable Battery
A lithium-ion battery or Li-ion battery is a type of rechargeable battery. Lithium-ion batteries are commonly used for portable electronics and electric vehicles and are growing in popularity for military and aerospace applications. Perfect for use in various electronics projects in India, 3.7V 1200 mAh Li-ion Cylindrical Battery | 3.7V Lithium Ion Battery for DIY Projects | Lithium Ion Cylindrical Battery ensures reliability and performance. Ideal for various electronics projects, 3.7V 1200 mAh Li-ion Cylindrical Battery | 3.7V Lithium Ion Battery for DIY Projects | Lithium Ion Cylindrical Battery offers quality and performance.
BC327 PNP General Purpose Amplifier Transistor
BC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
L298N Motor Driver Controller Board
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
5V 1 Channel Solid State Relay Board
1-ChannelSolid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototropic coupler to turn it ON and OFF. Perfect for use in various electronics projects in India, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse ensures reliability and performance. Ideal for various electronics projects, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse offers quality and performance.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
74LS76N Dual Master-Slave J-K Flip-Flop
- Supply Voltage : 7V
- Input Voltage : 5.5V
- Operating Free Air Temperature Range : 0C to +70C
- Storage Temperature Range : 65C to +150C
Priya (verified owner) –
Online best cost electronic components
Rohit (verified owner) –
I got my project done with these components Great Support
Lokesh (verified owner) –
Very well worth the money.
Rohit (verified owner) –
Very fast delivery.
Komal (verified owner) –
Very fast delivery.
Akshay (verified owner) –
Online best cost electronic components
Mayur (verified owner) –
Very well worth the money.
Rohit (verified owner) –
Very well worth the money.
Harsh (verified owner) –
Good support and recommended
Prakash (verified owner) –
Very fast delivery.
Viral (verified owner) –
Very well worth the money.
Zohar (verified owner) –
Very well worth the money.