ZMPT101B AC Single Phase Voltage Sensor Module
ADVANTAGES of ZMPT101B AC voltage sensor
- Analog output corresponding quantity can be adjusted.
- Pcb board size : 49.5 (mm) x19.4 (mm)
- Good consistency, for voltage and power measurement
- Very efficient and accuracy
GY-521 MPU-6050 Module 3 Axis Gyroscope + Accelerometer for Arduino
e MPU6050 is a Micro Electro-Mechanical Systems (MEMS) which consists of a 3-axis Accelerometer and 3-axis Gyroscope inside it. This helps us to measure acceleration, velocity, orientation, displacement and many other motion related parameter of a system or object. This module also has a (DMP) Digital Motion Processor inside it which is powerful enough to perform complex calculation and thus free up the work for Microcontroller. Perfect for use in various electronics projects in India, GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module ensures reliability and performance. Ideal for various electronics projects, GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module offers quality and performance.
TSOP 1738 38Mhz IR Infrared Receiver PCM Remote Control Sensor Module for Arduino,8051,AVR,PIC,ARM,MSP,Raspberr Pi Microcontroller
The TSOP1738 is a miniaturized receiver for infrared remote control systems. A PIN diode and a preamplifier are assembled on a lead frame while the epoxy package acts as an IR filter. The demodulated output signal can be directly decoded by a microprocessor. The TSOP1738 is compatible with all common IR remote control data formats. Perfect for use in various electronics projects in India, TSOP 1738 38Mhz IR Infrared Receiver PCM Remote Control Sensor Module for Arduino,8051,AVR,PIC,ARM,MSP,Raspberr Pi Microcontroller ensures reliability and performance. Ideal for various electronics projects, TSOP 1738 38Mhz IR Infrared Receiver PCM Remote Control Sensor Module for Arduino,8051,AVR,PIC,ARM,MSP,Raspberr Pi Microcontroller offers quality and performance.
Heart Rate Pulse Sensor Module
The working of the Pulse/Heart beat sensor is very simple. The sensor has two sides, on one side the LED is placed along with an ambient light sensor and on the other side we have some circuitry. This circuitry is responsible for the amplification and noise cancellation work. The LED on the front side of the sensor is placed over a vein in our human body. This can either be your Finger tip or you ear tips, but it should be placed directly on top of a vein. Perfect for use in various electronics projects in India, Heart Rate Pulse Sensor Module ensures reliability and performance. Ideal for various electronics projects, Heart Rate Pulse Sensor Module offers quality and performance.
30A Range Electrical Parts Current Sensor Module ACS712 for Arduino
The 30A range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage. Perfect for use in various electronics projects in India, 30A Range Electrical Parts Current Sensor Module ACS712 for Arduino ensures reliability and performance. Ideal for various electronics projects, 30A Range Electrical Parts Current Sensor Module ACS712 for Arduino offers quality and performance.
Original Flex sensor 2.2 inches for Motion and Diy
Flex sensors are usually available in two sizes. One is 2.2 inch and another is 4.5 inch. Although the sizes are different the basic function remains the same. They are also divided based on resistance. There are LOW resistance, MEDIUM resistance and HIGH resistance types. Choose the appropriate type depending on requirement. Here we are going to discuss 2.2inch Flex sensor that is FS-L-0055. Perfect for use in various electronics projects in India, Original Flex sensor 2.2 inches for Motion and Diy ensures reliability and performance. Ideal for various electronics projects, Original Flex sensor 2.2 inches for Motion and Diy offers quality and performance.
Water Float Switch Sensor (Big) for Water Level Controller with 3 Meter Wire
nan Perfect for use in various electronics projects in India, Water Float Switch Sensor for Water Level Controller with 3 Meter Wire ensures reliability and performance. Ideal for various electronics projects, Water Float Switch Sensor for Water Level Controller with 3 Meter Wire offers quality and performance.
Touch Sensor Capacitive Touch Switch Module DIY for Arduino Digital TTP223B A6T2
Specification
| Operating Voltage (VDC) | 2 ~ 5.5 |
| Output high VOH | 0.8VCC V |
| Output low VOL | 0.3VCC V |
| Response time (touch mode) | 60 mS |
| Response time (low power mode) | 220 mS |
| Length (mm) | 24 |
| Width (mm) | 24 |
| Height (mm) | 2 |
| Weight (gm) | 0.6 |
| Shipment Weight | 0.085 kg |
| Shipment Dimensions | 3 3 1 cm |
Micro Coin Vibration Motor
DHT11 Temperature and Humidity sensor
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
Raspberry Pi Pico Board Enclosure (Plastic Parts only) (* Pico Board Not Included) – 028
- Compactible with Raspberry Pi Pico Board (*Pico Board Not Included)
- L x W x H = 1.2cm x 5.8cm x 3.1cm
- Material: PLA+
- We are a Make in India Company.
- All products are quality tested before shipping.
Ultrasonic Distance Transducer Sensor for Arduino (JSN-SR04T)
Specification
- Working voltage : DC 5V
- Static working current : 5mA
- Working current : 30mA
- Acoustic emission frequency : 40KHz
- Wiring : +5V(positive); Trig(control); Echo(receive); GND(cathode);