RCWL-0516 Microwave Radar Sensor
Features ofRCWL-0516 Microwave Radar Sensor:-
- Transmission signal processing control chip RCWL-9196
- Wide operating voltage range 4.0V to 28.0V
- Penetrating detection capability, compared with the traditional infrared feeling PIR
- Adjustable Block time and distance
- 3.3V output power supply
Specifications ofRCWL-0516 Microwave Radar Sensor:-
| Operating Voltage(VDC) | 4 to 28 |
| Operating Current | 2.8mA (typical); 3mA (max) |
| Detecting Range | 5-9m |
| Transmitting Power | 20mW (typical); 30mW (max) |
| Output Voltage(V) | 3.2 to 3.4 |
| Output Voltage Driving Capacity | 100mA |
| Trigger Way | Repeat Trigger |
| Output Control Low Level | 0V |
| Output Control High Level | 3.3V |
| Operating Temperature (C) | -20 to 80 |
| Length (mm) | 36 |
| Width (mm) | 17 |
| Height (mm) | 2 |
| Weight (gm) | 3 |
ATTINY85 ic
Features of ATtiny85 Microcontroller
- Flash (Kbytes) :8 Kbytes
- Pin Count :8
- Max. Operating Freq. (MHz) :20 MHz
- CPU :8-bit AVR
- Number of Touch Channels :3
- Hardware QTouch Acquisition :No
- Max I/O Pins :6
- Ext Interrupts :6
- USB Interface :No
Ardui Mega 2560 PRO MINI Development Board
Specification
- Microcontroller : ATmega 2560
- USB-TTL converter : CH340g
- Power Out : 5 Volt - 800mA
- Power IN. : 5 Volt
- Power IN. VIN/DC Jack : 5 Volt
- Power Consumption :5 Volt, 220mA
- Logic Level : 5 Volt
- USB : Micro USB
- Clock Frequency : 16MHz
- Operating Supply Voltage : 5 Volt
- Digital I/O: 54
- Analog I/O : 16
- Memory Size : 256kb
- Data RAM Type/Size : 8Kb
- Data ROM Type/Size : 4Kb
- Interface Type : ISP
- Operating temperature : 40/+85
ATTINY85 USB Development Board
Specification
-
- Support for the IDE 1.0+ (OSX / Win / Linux)
- Power via USB or External Source - 5V or 7 -35V (automatic selection)
-
- On-board 500ma 5V Regulator
-
- Built-in USB(and serial debugging)
-
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB)
-
- 8k Flash Memory (about 6K after bootloader)
-
- I2C and SPI(vis USI)
-
- PWM on 3 pins (more possible with Software PWM)
-
- ADC on 4 pins
-
- Power LED and Test/ Status LED (on Pin0)
-
- Weight : 4g
GY-906 MLX90614ESF Temperature Sensor Module
Specification
-
- Small size, low cost
-
- Mounted on a breakout board with two types of pins
-
- 10k Pull up resistors for the I2C interface with optional solder jumpers
-
- Easy to integrate
-
- Factory calibrated in wide temperature range
-
- -40 125C for sensor temperature and
-
- -70 380C for object temperature.
-
- High accuracy of 0.5C over wide temperature range
-
- (0,50 C for both Ta and To) High (medical) accuracy calibration
-
- Measurement resolution of 0.02C
-
- Single and dual zone versions
-
- SMBus compatible digital interface
-
- Customizable PWM output for continuous reading
-
- Simple adaptation for 816V applications
-
- Sleep mode for reduced power consumption
-
- Different package options for applications and measurements versatility
-
- Automotive grade
5A FUSES 5A FUSE GLASS 5 X 20 mm
Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Perfect for use in various electronics projects in India, 5A FUSES 5A FUSE GLASS 5 X 20 mm ensures reliability and performance. Ideal for various electronics projects, 5A FUSES 5A FUSE GLASS 5 X 20 mm offers quality and performance.
0.47μF 474J 630V CBB22 Metallized Polypropylene Film Capacitor
XT60 Male To T Plug Female Adapter
- Great for adapting your XT60 batteries for use with chargers/ESCs that don’t provide an XT60 adapter
- The quick, easy and affordable solution for your mismatched connector
- Saves you money and soldering time
- Use to convert your battery’s XT90 connector to a T plug Female connector
- Great for use with RC planes, helis, cars, and trucks
Aluminum GT2 Timing Pulley 20 Tooth 8mm
Features:
- High-Quality Aluminium
- Excellently Machined
- Durable and practical
- Minimizes the chance of the belt slipping
- Easy to use
BY399 Diode
1×4 Matrix Membrane Switch Keypad
Features :
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- This allows a microcontroller to ‘scan’ the 5 output pins to see which of the 4 buttons is being pressed
