TCS3200 Color Recognition Sensor Detector Module for MCU Arduino
Specifications
-
- Working voltage : 3V-5V
-
- VCC : 3V-5V
-
- GND : GND
-
- S0-S3, E0,OUT : Communication interface
-
- The better distance between the TCS3200 and the tested object is 1cm.
-
- PCB size : 31.6 (mm) x 24.4 (mm)
FS1000A 433mHz Tx & Rx RF Radio Module
This is FS1000A 433mHz Tx RF Radio Module. This RF module comprises an RF Transmitter and an RF Receiver. The transmitter/receiver (Tx/Rx) pair operates at a frequency of 433 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4. Perfect for use in various electronics projects in India, FS1000A 433mHz Tx & Rx RF Radio Module ensures reliability and performance. Ideal for various electronics projects, FS1000A 433mHz Tx & Rx RF Radio Module offers quality and performance.
Finger Print Sensor Module – R307
This is the R307 Optical Fingerprint Reader Sensor Module. R307 fingerprint module is a fingerprint sensor with a TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter. The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person. Perfect for use in various electronics projects in India, Finger Print Sensor Module - R307 ensures reliability and performance. Ideal for various electronics projects, Finger Print Sensor Module - R307 offers quality and performance.
LM7806 IC – 6V Positive Voltage Regulator | TO-220 Package
1000uF 63V Electrolytic Capacitor
11.1V 2600MAH Lithium-ION Rechargeable Battery
Mini 360 Step Down Buck Converter Power Supply Module
Specifications:
| Regulator IC | MPS MP2307DN |
| Input Voltage Range | 4.75 23VDC |
| Selectable Output Voltage | 1.0 17VDC |
| Rated Current | 1.8A Continuous 3A Surge Current |
| Maximum conversion efficiency | 95% (5Vin, 3.3Vout ~200mA output) |
| Switching Frequency | 340kHz |
| No-load output Ripple | 30mV |
| Load Regulation | 0.5% |
| Voltage Regulation | 2.5% |
| Operational Temperature Range(C) | -40 to +85 |
| Length (mm) | 17 |
| Width (mm) | 11 |
| Height (mm) | 3.8 |
| Weight (gm) | 2 |
Power Bank Module – Dual USB 5V 1A 2.1A 18650 Battery Charger Module with LCD Display
Specification:
- Micro USB input: 5 V 1A
- USB output: 5V 2.1A / 5V 1A (Dual USB interface)
- Charging screen: intelligent digital screen
- Type of batteries: liquid lithium ion batteries (18650)
- Product size: 57mm x 28mm
- Screen size: 27mm x 17mm
- Input Voltage: 3.7V
Installation instructions:
- The circuit board is connected to the negative battery B-, B is positive
- Check polarity, wrong wiring will burn the board.
- the battery is connected in parallel welding.
- There is insulation between the battery and the circuit board
- The battery can not touch the circuit board, may cause short circuit if it does.
IRF530NPBF – N-Channel MOSFET, 17 A, 100 V, 3-Pin TO-220AB
DC Motor Speed Control Regulator Pulse PWM 12V-40V 10A Best Quality
Specifications:-
| Input supply voltage | DC 12V-40V |
| The maximum output power | 400W |
| The maximum continuous output current | 8A |
| Static Current | 0.02 A ( Standby ) |
| PWM frequency | 13kHz |
| Material | Plastic, metal |
| Duty Cycle adjustable | 10%-100% |
| The operation environment temperature: | -20-40 |
| Dimension(cm) | 6*5.5*2.8 |
| Net weight | 69g |
USB to TTL Serial Converter Adapter
- Single chip USB to asynchronous serial data transfer interface.
- Entire USB protocol handled on the chip. No USB specific firmware programming required.
- Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration.
- Fully integrated USB termination resistors.
- Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
- 128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
Transformer 220V AC to 0-12 AC Current 2A -Step Down (2000 mA)
Specifications of 0-12 2 Ampere Step Down Transformer:-
Input Voltage: 230V AC
Output Voltage: 12V or 0V
Output Current: 2 Amp
Mounting: Vertical mount type
Winding: Copper
Features of0-12 2 Ampere Step DownTransformer:-
Soft Iron Core.
2 Amp Current Drain.
100% Copper Winding
Applications of0-12 2 Ampere Step DownTransformer:-
DIY projects Requiring In-Application High current drain.
On chassis AC/AC converter.
Designing a battery Charger. Perfect for use in various electronics projects in India, Transformer 220V AC to 0-12 AC Current 2A -Step Down (2000 mA) ensures reliability and performance. Ideal for various electronics projects, Transformer 220V AC to 0-12 AC Current 2A -Step Down (2000 mA) offers quality and performance.