1uF 50V Multi Layered Ceramic Capacitor (MLCC) SMD 0805
Solar Panel 12 Volt 10 Watt
Specification
- Voltage: 12 Volts
- Current: 0.8334 Amp
- Power: 10 Watt
- Size: 35 cm x 30 cm x 2.5 cm
Flame Sensor Infrared Receiver Module Ignition Source Detection Module
Specification:
-
- Can detect a flame or in a 760 nanometer wavelength of ~ 1100 nm range of the light, lighter flame test distance of 80cm, for the greater flame, the farther the distance test
-
- The detection angle of 60 degrees or so, particularly sensitive to the flame spectrum
-
- Sensitivity adjustable (shown in blue digital potentiometer adjustment)
-
- The comparator output signal clean, good waveform, driving ability, more than 15mA
-
- With adjustable precision potentiometer sensitivity adjustment
-
- The working voltage of 3.3V-5V
-
- The output format : DO digital switching outputs (0 and 1) and AO analog voltage output
-
- A fixed bolt holes for easy installation
-
- Using a wide voltage LM393 comparator
0.96″ 128 X 64 Blue Light I2C OLED Screen Display Module
- The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64. The package includes display board,display, 4 pin male header pre-soldered to board.
- OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
- OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
100K Ohm 3Pin Shaft Potentiometer
It is a 100K Ohm 3Pin 15mm Shaft Potentiometer. This is used for adjusting various parameters like voltage, current, etc in an electronic circuit. Perfect for use in various electronics projects in India, 100K Ohm 3Pin Shaft Potentiometer ensures reliability and performance. Ideal for various electronics projects, 100K Ohm 3Pin Shaft Potentiometer offers quality and performance.
BD140 – 80V ,1.5A NPN power Transistor voltage regulator
50K Multiturn Potentiometer
ESP32 Camera Module Development Board WiFi
ESP32-CAM Development Board(with camera) Module
The ESP32-CAM is an Ai-Thinkers Original ESP32 CAM WiFi+Bluetooth with OV2640 Camera Module based on the ESP32 chip with the additional facility of using a camera. It is ideal for various IoT applications. The ESP32-CAM has a very competitive small-sized camera module that can operate independently as a minimum system. Ai-Thinker ESP32 CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
100uF 35V Electrolytic Capacitors
A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store energy electrostatically in an electric field. The forms of practical capacitors vary widely, but all contain at least two electrical conductors (plates) separated by a dielectric (i.e., insulator). Perfect for use in various electronics projects in India, Aluminum Electrolytic Capacitors - 35volts 100uF ensures reliability and performance. Ideal for various electronics projects, Aluminum Electrolytic Capacitors - 35volts 100uF offers quality and performance.
Traffic Light With 5mm 3 Light (Plastic Parts + 3 x 5mm LED) -034
- L x W x H = 3cm x 1.3cm x 7.2cm
- Includes 5mm LEDs (Red, Yellow, Green)
- Material: PLA+
- Proudly Made in India
- All products are quality-tested before shipping.
10pf 50V ceramic Capacitor
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications Perfect for use in various electronics projects in India, 10pf 50V ceramic Capacitor ensures reliability and performance. Ideal for various electronics projects, 10pf 50V ceramic Capacitor offers quality and performance.
28 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC’s
28 Pin Narrow IC Socket base adaptor is a 28 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder. The IC base is for a narrow IC. Perfect for use in various electronics projects in India, 28 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC's ensures reliability and performance. Ideal for various electronics projects, 28 Pin DIP IC Socket-Base-Connector for Microcontrollers and IC's offers quality and performance.