C2570A Silicon NPN Transistor – Low Noise Amplifier for VHF & UHF Stages
MQ3 Alcohol Gas Sensor Module
Specification of MQ3 GAS Sensor Module
- Power Supply : 5 Volts
- Interface Type : Analog & Digital
- High Sensitivity to Alcohol & small sensitivity to Benzine.
- Low Cost.
- Stable & Long Life.
- On board Power indication.
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
- ThisTP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection isa tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium ion(Li-Ion) cells such as 16550s that dont have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.
- Furthermore when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.
- Manufactured under fully machinery processing. so it has high reliability for the best performance. In conclusion, it is specialdesign for a single lithium battery charging.TP4056 Other features include the current monitor, under voltage lockout, automatic recharge, andtwo status pin to indicate charge termination and the presence of an input voltage.
- Using the module:
- Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
- Connect cell to charge to B+/B- pads on the right-hand side of the module.
- A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
- Important! Disconnect load when charging
- The red LED indicates charging in progress, green LED indicates charging has finished.
- Never charge your battery at a rate greater than 1C.
4.7k Resistor – 2 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 4.7k Resistor - 2 Watt ensures reliability and performance. Ideal for various electronics projects, 4.7k Resistor - 2 Watt offers quality and performance.
3mm Banana Socket Jack for Banana Plug Terminal Connector ( Black )
Features
- Withaluminum alloy core, nickel-plated, and a solid hard plastic shell, the binding post is durable and reliable, have a stable performance.
- Suitable for 4mm banana plugs, spade terminals or a bare wire, easy to install and use.
- Color-coded black/red for maintaining proper polarity.
- Ideal for speaker enclosure applications and amplifier, perfect for connecting center speakers to AV receivers
10 Ohm 100W Watt Variable Resistor Ceramic Rheostat / Load Resistor
10 Ohm 100 Ohm Perfect for use in various electronics projects in India, 10 Ohm 100W Watt Variable Resistor Ceramic Rheostat / Resistor ensures reliability and performance. Ideal for various electronics projects, 10 Ohm 100W Watt Variable Resistor Ceramic Rheostat / Resistor offers quality and performance.
SS34 3A 40V Schottky Diode ? SMA (DO214-AC)
- This is SS34 3A 40V Schottky Diode. This is a SMD version of 1N5822. It has current rating of 3A, with max repetitive voltage of 40V
MUR1660 600V 16A Ultrafast Power Diode
The MUR1660CT 16A, 600V Ultra fast Diodes have a low forward voltage drop and are of planar, silicon nitride passivated, ion-implanted, epitaxial construction. These devices are intended for use as energy steering/clamping diodes and rectifiers in a variety of switching power supplies and other power switching applications. Their low stored charge and ultra fast recovery with soft recovery characteristics minimizes ringing and electrical noise in many power switching circuits, thus reducing power loss in the switching transistor. These state-of-the-art devices are a series designed for use in switching power supplies, inverters and as free wheeling diodes. The MUR1660CT is designed for use in switching power supplies, inverters and as free wheeling diodes, these state?of?the?art devices have the following features:
? Ultra fast 35 and 60 Nanosecond Recovery Times
? 175?C Operating Junction Temperature
? Popular TO?220 Package
? Epoxy Meets UL94, VO @ 1/8?
? High Temperature Glass Passivated Junction
? High Voltage Capability to 600 Volts
? Low Leakage Specified @ 150?C Case Temperature
? Current Derating @ Both Case and Ambient Temperatures
??Low power loss
??High efficiency Low forward voltage
??Super fast recovery times
Mechanical Characteristics:-
? Case: Epoxy, Molded
? Weight: 1.9 grams (approximately)
? Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
? Lead Temperature for Soldering Purposes: 260?C Max. for 10 Seconds
? Shipped 50 units per plastic tube
? Marking: U1610, U1615, U1620, U1640, U1660
1pf 50V Ceramic Capacitor
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications Perfect for use in various electronics projects in India, 0.001uf/1nf/1pf 50V Ceramic Capacitor ensures reliability and performance. Ideal for various electronics projects, 0.001uf/1nf/1pf 50V Ceramic Capacitor offers quality and performance.
2A 250V AC SPDT ON-ON Rocker Switch
This is a basic On-On SPST Rocker Switch for your projects. No screws required, it simply clips into place. This is a two-pin switch that is easy to use, simply cut one of the two power wires and solder each of the ends to the unit. Perfect for use in various electronics projects in India, 2A 250V AC SPDT ON-ON Rocker Switch ensures reliability and performance. Ideal for various electronics projects, 2A 250V AC SPDT ON-ON Rocker Switch offers quality and performance.
2.2k Resistor – 2 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 2.2k Resistor - 2 Watt ensures reliability and performance. Ideal for various electronics projects, 2.2k Resistor - 2 Watt offers quality and performance.
47 uF 50V Through Hole Electrolytic Capacitor
Specification
| Capacitance | 47uF |
| Mounting Type | Through Hole |
| Voltage(V) | 50 |
| Operating Temperature (C) | -40 to 105 |
| Length (mm) | 6.3 |
| Width (mm) | 6.3 (body diameter) |
| Height (mm) | 35 |
| Weight (gm) | 1 (approx) (each) |
| Shipment Weight | 0.018 kg |
| Shipment Dimensions | 10 7.5 1 cm |