Welcome to Smartxprokits| Get Flat 5% Use code- *FLAT5* and Free delivery on orders above Rs 900.

Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop

Category: IC and Chips

IC and Chips

Showing 1–16 of 46 results

  • MAX232 is a communication IC. It is used to convert TTL Signals to RS232 Signal and vice versa. MAX232 provides RS-232 voltage level outputs (approx. ± 7.5 V) from a single + 5 V supply via on-chip charge pumps and external capacitors. This makes it useful for implementing RS-232 in devices that otherwise do not need any voltages outside the 0 V to + 5 V range, as power supply design does not need to be made more complicated just for driving the RS-232 in this case.

    Add to cart
  • 4033 Decade counter IC

    53.00

    The HCF4033B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. The HCF4033B consists of a 5-stages Johnson decade counter and an output decoder which converts the Johnson code to a 7 segment decoded output for driving one stage in a numerical display. This device is particularly advantageous in display applications where low power dissipation and/or …

    4033 Decade counter ICRead More

    Add to cart
  • Logic Type: Counter, Decade; Direction: Up; Number of Bits per Element: 4 Number of Elements: 1; Reset: Asynchronous; Timing: Synchronous Count Rate: 66MHz; Trigger Type: Positive Edge Voltage – Supply: 2V ~ 6V; Operating Temperature: -40°C ~ 125°C Package Include: 2 x 74160 IC

    Add to cart
  • 74373 Octal D-Type TRI-STATE Latch

    13.00

    The IC 74LS373 is a transparent latch consists of a eight latches with three state outputs for bus organized systems applications.It is a 20 pin IC comprises of eight input data lines (D0-D7) and eight output lines (O0-O7). The OE pin was meant for Output enable and LE pin for Latch enable.

    Add to cart
  • 7476 Dual Master-Slave J-K Flip-Flop

    75.00
    • Supply Voltage : 7V
    • Input Voltage : 5.5V
    • Operating Free Air Temperature Range : 0°C to +70°C
    • Storage Temperature Range : −65°C to +150°C
    Add to cart
  • 74F138 (Decoder/Demultiplexer)

    45.07

    The F138 is a high-speed 1-of-8 decoder/demultiplexer.This device is ideally suited for high-speed bipolar memorychip select address decoding. The multiple input enablesallow parallel expansion to a 1-of-24 decoder using justthree F138 devices or a 1-of-32 decoder using four F138devices and one inverter.

    Add to cart
  • The 74HC595 consists of an 8−bit shift register and an 8−bit D−typelatch with three−state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8−bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs

    Add to cart
  • 7447 or 74LS47 decodes BCD into 7 Segments, which means it accepts a binary coded decimal or BCD Values as input and decoded into a pattern that drives a 7-segment for displaying digits 0 to 9, so its name is BCD to 7 segment driver or decoder. Its input is 4 lines BCD data and generates complements as output. The generation of complement data of BCD is internally so no coding or programming is required to generate it.

    Add to cart
  • AMS1117-3.3V – SMD SOT-23 Package

    10.00

    AMS1117-3.3V, 1A, SOT-223 Voltage Regulator IC is a series of low dropout three -terminal regulators with a dropout of 3.3V at 1A load current. AMS 1117 features a very low standby current 2mA compared to 5mA of a competitor. Other than a fixed version, Vout = 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, and 12V, AMS1117 has an adjustable version, which can provide an output voltage from 1.25 to 12V with only two external resistors.

    Add to cart
  • AP8022 ac-dc off line smps primary switcher ic – dip8

    27.61

    Semiconductor Mobile Charger IC AP8022 Chipown, For Power, Mounting Type: Dip 8

    Add to cart
  • ATTINY85V2 / ATTiny85 USB Development Board Digistump Mini

    198.24

    Features of ATtiny85 Microcontroller

    • Flash (Kbytes) : 8 Kbytes
    • Pin Count : 8
    • Max. Operating Freq. (MHz) : 20 MHz
    • CPU : 8-bit AVR
    • Number of Touch Channels : 3
    • Hardware QTouch Acquisition : No
    • Max I/O Pins : 6
    • Ext Interrupts : 6
    • USB Interface :No
    Add to cart
  • BT136 600D triac logic sensitive gate 600v 4a to220ab

    11.00
    • BT136 is Planar passivated very sensitive gate four quadrant TRIAC in a SOT78 plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate “series D” triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.
    Add to cart
    • Decade counter/decimal decode display (CD4017B)
    • Binary counter/decoder
    • Frequency division
    • Counter control/timers
    • Divde-by-N counting
    • For further application information, see ICAN-6166 “COS/MOS MSI Counter and Register Design and Applications”
    Add to cart
  • It requires an external capacitor (between pins 1 and 3) and an external resistor (between pins 2 and 3) to determine the output pulse width in the monostable mode, and the output frequency in the astable mode. Astable operation is enabled by a high level on the astable input or low level on the astable input. The output frequency (at 50% …

    CD4047 CMOS Low Power Monostable/Astable Multivibrator IC DIP-14 Package ICRead More

    Add to cart
  • CD4069 Hex Inverter IC

    15.00

    The CD4069 device consist of six CMOS inverter circuits. These devices are intended for all general-purpose inverter applications where the medium-power TTL-drive and logic-level-conversion capabilities of circuits such as the CD4009 and CD4049 hex inverter and buffers are not required.

    Add to cart
  • Specification:-

    ParameterValue
    Package / CaseDIP-6
    Length8.7 mm
    Width6.5 mm
    Height3.81 mm
    Collector-Emitter Breakdown Voltage70 V
    Current Transfer Ratio320%
    Fall Time15 us
    Isolation Voltage5000 Vrms
    Maximum Collector Current100 mA
    Maximum Collector Emitter Saturation Voltage0.4 V
    Maximum Collector Emitter Voltage70 V
    Maximum Operating Temperature+ 100 C
    Minimum Operating Temperature– 55 C
    Mounting StyleThrough Hole
    Number of Channels1 Channel
    Output TypeNPN Phototransistor
    PackagingTube
    Pd – Power Dissipation150 mW
    Product TypeTransistor Output Optocouplers
    Rise Time4.6 us
    SeriesCNY
    Add to cart

Cart

Your Cart is Empty

Back To Shop
Open chat