DHT11 Temperature and Humidity sensor
₹120.00 Original price was: ₹120.00.₹65.00Current price is: ₹65.00. + GST
1K Multiturn Potentiometer
₹15.00 Original price was: ₹15.00.₹8.20Current price is: ₹8.20. + GST
MAX232 – RS232 to TTL Converter 3V, 5V Compatible IC
Rated 4.42 out of 5 based on 12 customer ratings
(12 customer reviews)
₹28.00 Original price was: ₹28.00.₹18.08Current price is: ₹18.08. + GST
MAX232 is a communication IC. It is used to convert TTL Signals to RS232 Signal and vice versa.?MAX232?provides RS-232 voltage level outputs (approx. ? 7.5 V) from a single + 5 V supply via on-chip charge pumps and external capacitors. This makes it useful for implementing RS-232 in devices that otherwise do not need any voltages outside the 0 V to + 5 V range, as power supply design does not need to be made more complicated just for driving the RS-232 in this case.
40 in stock
SKU:
B-2
Categories: Electronic, IC and Chips
Description
- Operate from Single +5V Power Supply (+5V and +12V?MAX231/MAX239)
- Low-Power Receive Mode in Shutdown (MAX223/MAX242)
- Meet All EIA/TIA-232E and V.28 Specifications
- Multiple Drivers and Receivers
- 3-State Driver and Receiver Outputs
Reviews (12)
12 reviews for MAX232 – RS232 to TTL Converter 3V, 5V Compatible IC
Add a review Cancel reply
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
1N4148 Zener Diode
Rated 4.57 out of 5
It is one of the most popular and long lived switching diodes because of its dependable specifications and low cost. The 1N4148 is useful in switching applications up to about 100 MHz. The 1N4148 comes in a DO-35 glass package for thru-hole mounting. Perfect for use in various electronics projects in India, 1N4148 -100V ,450mA | Diode Small Signal ensures reliability and performance. Ideal for various electronics projects, 1N4148 -100V ,450mA | Diode Small Signal offers quality and performance.
BC327 PNP General Purpose Amplifier Transistor
Rated 4.00 out of 5
BC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
Crystal Oscillator 16 MHZ
Rated 4.56 out of 5
Green 10mm LED
Rated 4.50 out of 5
This is10mm Green LED. The size refers to the outside diameter of the LED, with 5mm being the most common LED model. 3mm LEDs are the smallest and used in tight-fitting applications. 8mm and 10mm models are used to output as much light as possible. Perfect for use in various electronics projects in India, Green 10mm LED ensures reliability and performance. Ideal for various electronics projects, Green 10mm LED offers quality and performance.
74HC595 8-bit Shift Register IC
Rated 4.62 out of 5
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
DHT11 Temperature and Humidity sensor
Rated 4.67 out of 5
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Rated 5.00 out of 5
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
74LS76N Dual Master-Slave J-K Flip-Flop
Rated 5.00 out of 5
- Supply Voltage : 7V
- Input Voltage : 5.5V
- Operating Free Air Temperature Range : 0C to +70C
- Storage Temperature Range : 65C to +150C


















Rahul (verified owner) –
The product is firmly packed.
Shubham (verified owner) –
Very fast delivery.
Priya (verified owner) –
Less cost than other websites
Er.Prashant (verified owner) –
Very well worth the money.
Komal (verified owner) –
Online best cost electronic components
Roma (verified owner) –
Drone parts i ordered and found ok
Komal (verified owner) –
Online best cost electronic components
Jayen (verified owner) –
Good support and recommended
Devendra (verified owner) –
Very fast delivery.
Akshay (verified owner) –
Good techinical knowledge
Akshay (verified owner) –
Best cost electronic components in India
Mayur (verified owner) –
The product is firmly packed.