“8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry” has been added to your cart. View cart
MOV 14D471 , 471V - Metal Oxide Varistor
₹10.00 Original price was: ₹10.00.₹7.54Current price is: ₹7.54. + GST
Viper22A Low Power Off Line SMPS Primary Switcher
₹40.00 Original price was: ₹40.00.₹25.16Current price is: ₹25.16. + GST
BT136 600D triac logic sensitive gate 600v 4a to220ab
Rated 4.46 out of 5 based on 13 customer ratings
(13 customer reviews)
₹10.00 Original price was: ₹10.00.₹7.00Current price is: ₹7.00. + GST
- BT136?is Planar passivated very sensitive gate four quadrant?TRIAC?in a?SOT78?plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate “series D” triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.
7 in stock
SKU:
B-1
Categories: Electronic, IC and Chips
Description
Specification
- Direct triggering from low power drivers and logic ICs
- High blocking voltage capability
- Low holding current for low current loads and lowest EMI at commutation
- Planar passivated for voltage ruggedness and reliability
- Triggering in all four quadrants
- Very sensitive gate
Reviews (13)
13 reviews for BT136 600D triac logic sensitive gate 600v 4a to220ab
Add a review Cancel reply
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
5V Single Channel Relay Module
Rated 4.17 out of 5
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side. Perfect for use in various electronics projects in India, Single Channel 5v Relay Module High Low Level Trigger ensures reliability and performance. Ideal for various electronics projects, Single Channel 5v Relay Module High Low Level Trigger offers quality and performance.
IR Proximity Sensor for Obstacle Sensing and Line Follower Robots
Rated 5.00 out of 5
Proximity Sensorare used to detect objects and obstacles in front of sensor.
Sensor keeps transmittinginfrared lightand when any object comes near, it is detected by the sensor by monitoring the reflected light from the object. It can be used in robots for obstacle avoidance, for automatic doors, for parking aid devices or for security alarm systems, or contact less tachometer by measuring RPM of rotation objects like fan blades. Perfect for use in various electronics projects in India, IR Proximity Sensor for Obstacle Sensing and Line Follower Robots ensures reliability and performance. Ideal for various electronics projects, IR Proximity Sensor for Obstacle Sensing and Line Follower Robots offers quality and performance.
BC557 PNP General Purpose Transistor 45V 100mA TO-92 Package
Rated 5.00 out of 5
BC557 is a widely used PNP bipolar junction transistor manufactured in small TO-92 package. It is a general purpose PNP transistor that can be used as a switch or amplifier in electronic circuits. Its HFE ratings are 125 to 800 which makes it an ideal transistor to use as a small signal amplifier in electronic circuits for example for audio signal amplification or other, the HFE ratings of BC557 can be determined by the last letter after its number for example BC557A HFE ratings are 110-220, BC557B HFE ratings are 200-450 and BC557C HFE ratings are 420-800. The max collector dissipation is 500 milliwatt which is also an another good point to use it in amplification stages. Moreover it will also perform well when used it as a switch for load under 100mA. The transistor has also good collector to emitter (VCE) value that is -45V, therefore you can easily use it in circuits using 40 to 45 volts DC.
16 X 2 (1602) Yellow (Green) LCD Display
Rated 4.00 out of 5
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 58 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
L298N Motor Driver Controller Board
Rated 5.00 out of 5
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
CD4017 Dip16 PIN IC
5V 1 Channel Solid State Relay Board
Rated 5.00 out of 5
1-ChannelSolid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototropic coupler to turn it ON and OFF. Perfect for use in various electronics projects in India, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse ensures reliability and performance. Ideal for various electronics projects, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse offers quality and performance.
Voltage Sensor Module
Rated 4.42 out of 5
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.


















Ayush (verified owner) –
Drone parts i ordered and found ok
Er.Prashant (verified owner) –
Good service.
Rahul (verified owner) –
Very well worth the money.
Sneha (verified owner) –
Very fast delivery.
Viral (verified owner) –
The product is firmly packed.
Vikas (verified owner) –
Best cost electronic components in India
Shubham (verified owner) –
Good support and recommended
Rahul (verified owner) –
The product is firmly packed.
Mayur (verified owner) –
Online best cost electronic components
Mayur (verified owner) –
Good quality.
Rohit (verified owner) –
Very well worth the money.
Shubham (verified owner) –
Drone parts i ordered and found ok
Ayush (verified owner) –
Good service.