-30%
MOV 14D471 , 471V - Metal Oxide Varistor
Original price was: ₹10.00.₹7.54Current price is: ₹7.54. + GST
Viper22A Low Power Off Line SMPS Primary Switcher
Original price was: ₹40.00.₹25.16Current price is: ₹25.16. + GST
BT136 600D triac logic sensitive gate 600v 4a to220ab
Original price was: ₹10.00.₹7.00Current price is: ₹7.00. + GST
- BT136?is Planar passivated very sensitive gate four quadrant?TRIAC?in a?SOT78?plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate “series D” triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.
7 in stock
Description
Specification
- Direct triggering from low power drivers and logic ICs
- High blocking voltage capability
- Low holding current for low current loads and lowest EMI at commutation
- Planar passivated for voltage ruggedness and reliability
- Triggering in all four quadrants
- Very sensitive gate
Reviews (13)
13 reviews for BT136 600D triac logic sensitive gate 600v 4a to220ab
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
5V Single Channel Relay Module
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side. Perfect for use in various electronics projects in India, Single Channel 5v Relay Module High Low Level Trigger ensures reliability and performance. Ideal for various electronics projects, Single Channel 5v Relay Module High Low Level Trigger offers quality and performance.
16 X 2 (1602) Yellow (Green) LCD Display
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 58 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
BC327 PNP General Purpose Amplifier Transistor
BC327 is a general purpose PNP BJP transistor that can be used for switching and amplification purposes in electronic circuits. The transistor features 800mA collector current hence it can be used to drive variety of loads in an electronic application. The max collector-emitter voltage is -45V therefore it can easily handle load voltage under 45V. Apart from that transistor also features 625mW collector dissipation and DC current gain of maximum 630 therefore it can also be used as an audio amplifier or for any type of signal amplification.
FR107 Diode
High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Fast switching for high efficiency Perfect for use in various electronics projects in India, FR107 - 700V , 1A Diode ensures reliability and performance. Ideal for various electronics projects, FR107 - 700V , 1A Diode offers quality and performance.
74HC595 8-bit Shift Register IC
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
Ayush (verified owner) –
Drone parts i ordered and found ok
Er.Prashant (verified owner) –
Good service.
Rahul (verified owner) –
Very well worth the money.
Sneha (verified owner) –
Very fast delivery.
Viral (verified owner) –
The product is firmly packed.
Vikas (verified owner) –
Best cost electronic components in India
Shubham (verified owner) –
Good support and recommended
Rahul (verified owner) –
The product is firmly packed.
Mayur (verified owner) –
Online best cost electronic components
Mayur (verified owner) –
Good quality.
Rohit (verified owner) –
Very well worth the money.
Shubham (verified owner) –
Drone parts i ordered and found ok
Ayush (verified owner) –
Good service.