-30%
MOV 14D471 , 471V - Metal Oxide Varistor
Original price was: ₹10.00.₹7.54Current price is: ₹7.54. + GST
Viper22A Low Power Off Line SMPS Primary Switcher
Original price was: ₹40.00.₹25.16Current price is: ₹25.16. + GST
BT136 600D triac logic sensitive gate 600v 4a to220ab
Original price was: ₹10.00.₹7.00Current price is: ₹7.00. + GST
- BT136?is Planar passivated very sensitive gate four quadrant?TRIAC?in a?SOT78?plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate “series D” triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.
7 in stock
Description
Specification
- Direct triggering from low power drivers and logic ICs
- High blocking voltage capability
- Low holding current for low current loads and lowest EMI at commutation
- Planar passivated for voltage ruggedness and reliability
- Triggering in all four quadrants
- Very sensitive gate
Reviews (13)
13 reviews for BT136 600D triac logic sensitive gate 600v 4a to220ab
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
5V Single Channel Relay Module
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side. Perfect for use in various electronics projects in India, Single Channel 5v Relay Module High Low Level Trigger ensures reliability and performance. Ideal for various electronics projects, Single Channel 5v Relay Module High Low Level Trigger offers quality and performance.
L298N Motor Driver Controller Board
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
74HC595 8-bit Shift Register IC
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
Crystal Oscillator 8 MHZ
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC's which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
ESP-12F ESP8266 WIFI Module
Core processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra low power 32-bit MCU micro, with the 16-bit short mode, Clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi Fi MAC/BB/RF/PA/LNA, on-board antenna.
Perfect for use in various electronics projects in India, Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module ensures reliability and performance. Ideal for various electronics projects, Quality ESP-12F ESP8266 Remote Serial Port WIFI Transceiver Wireless Module offers quality and performance. 
Original Flex sensor 2.2 inches for Motion and Diy
Flex sensors are usually available in two sizes. One is 2.2 inch and another is 4.5 inch. Although the sizes are different the basic function remains the same. They are also divided based on resistance. There are LOW resistance, MEDIUM resistance and HIGH resistance types. Choose the appropriate type depending on requirement. Here we are going to discuss 2.2inch Flex sensor that is FS-L-0055. Perfect for use in various electronics projects in India, Original Flex sensor 2.2 inches for Motion and Diy ensures reliability and performance. Ideal for various electronics projects, Original Flex sensor 2.2 inches for Motion and Diy offers quality and performance.
DHT11 Temperature and Humidity sensor
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
Ayush (verified owner) –
Drone parts i ordered and found ok
Er.Prashant (verified owner) –
Good service.
Rahul (verified owner) –
Very well worth the money.
Sneha (verified owner) –
Very fast delivery.
Viral (verified owner) –
The product is firmly packed.
Vikas (verified owner) –
Best cost electronic components in India
Shubham (verified owner) –
Good support and recommended
Rahul (verified owner) –
The product is firmly packed.
Mayur (verified owner) –
Online best cost electronic components
Mayur (verified owner) –
Good quality.
Rohit (verified owner) –
Very well worth the money.
Shubham (verified owner) –
Drone parts i ordered and found ok
Ayush (verified owner) –
Good service.