-25%
XH 2.5mm 12-Pin Wafer Male Connector – Straight DIP, Tin-Plated
Original price was: ₹5.00.₹3.00Current price is: ₹3.00. + GST
12k Ohm Resistor – 5w
Original price was: ₹15.00.₹8.00Current price is: ₹8.00. + GST
Ardu Nano Board ATmega328P (without solder)
Original price was: ₹240.00.₹180.00Current price is: ₹180.00. + GST
Buy the Ardu Nano V3.0 with ATmega328P and CH340 (Unsoldered). Ideal for compact projects, this breadboard-friendly microcontroller simplifies prototyping for DIY enthusiasts.
20 in stock
Description
The Ardu Nano ATmega328P CH340 Chip (Unsoldered) is a compact, breadboard-friendly microcontroller board perfect for DIY electronics and prototyping projects. Based on the ATmega328P microcontroller and equipped with the CH340 USB-to-Serial driver, it ensures seamless connectivity via a USB port.
This Nano V3.0 variant comes unsoldered, giving users the flexibility to customize pin headers as per their project requirements. Despite its small size, it offers the full capabilities of the Arduino Uno, making it ideal for robotics, IoT projects, and educational kits.
Key Features:
- ATmega328P microcontroller for powerful performance.
- CH340 USB driver for reliable USB connectivity.
- Compact and breadboard-friendly design.
- Comes unsoldered for flexible header configuration.
- Fully compatible with the Arduino IDE for programming.
- Low power consumption, ideal for battery-operated projects.
Benefits:
- Perfect for compact electronics and robotics projects.
- Breadboard-friendly for easy prototyping.
- Flexible and beginner-friendly for students and DIY enthusiasts.
Whether you’re a hobbyist, student, or electronics professional, the  Nano  is your go-to microcontroller for all prototyping needs.
Reviews (7)
7 reviews for Ardu Nano Board ATmega328P (without solder)
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
220V AC 2000W SCR Voltage Regulator Motor Speed Controller
Features:
- With reverse polarity protection, high current protection high temperature fr-4 circuit board
- Maximum power: 2000w
- voltage: Ac 110-220v
- voltage regulation: Ac 50-220v
- size(lx w): Approx. 46 x 35mm
- how to use: This product series with the lamp or electrical circuit, table lamps, appliances disconnect any firewire or zero line (ie a product two wires connected to both) rotary potentiometer spin rod, you can play light and shade adjustment, speed, pressure, the role of the thermostat, use very convenient. This product is applicable to: The use of new two-way high-power thyristor can be very convenient to adjust the mains current up to 25 a, and solve the the overcurrent problem of the heating wire resistance is too small in the case of cooling causing good, the output voltage is adjusted anywhere between 90 to 220 volts for use with electrical appliances. Such as: Electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat. So as to achieve dimming, thermostats, pressure regulator effect. Large appliances available, power consumption is less than 2, 000 watts of power has sufficient home appliances or small factories. (Inductive or capacitive load power should be reduced, the regulator is equipped with two-way high-power thyristor, potentiometers are with nuts, do not have to add any components will be able to use, very convenient and practical).
840 Points Breadboard with Power Supply
An MB102 840 Points Solderless Prototype PCB Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&D or university lab. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components. Perfect for use in various electronics projects in India, 840 Points Breadboard with Power Supply ensures reliability and performance. Ideal for various electronics projects, 840 Points Breadboard with Power Supply offers quality and performance.
NRF24L01 2.4GHz Wireless Transceiver Module
- Has on board antenna. The nRF24L01 is a single chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced ShockBurst), designed for ultra low power wireless applications.
- The nRF24L01 is designed for operation in the world wide ISM frequency band at 2.400 - 2.4835GHz. An MCU (microcontroller) and very few external passive components are needed to design a radio system with the nRF24L01. The nRF24L01 is configured and operated through a Serial Peripheral Interface (SPI.) Through this interface the register map is available. The register map contains all configuration registers in the nRF24L01 and is accessible in all operation modes of the chip.
- The embedded baseband protocol engine (Enhanced ShockBurst) is based on packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Internal FIFOs ensure a smooth data flow between the radio front end and the systems MCU. Enhanced ShockBurst reduces system cost by handling all the high-speed link layer operations. The radio front end uses GFSK modulation. It has user configurable parameters like frequency channel, output power and air data rate.
- DNA Solutions has large collection of various types of Transceiver Module. Check our complete collection of Transceiver Module
DS1307 Real Time Clock (RTC) I2C IIC Module AT24C32 without Battery
This is Tiny RTC Real Time Clock DS1307 I2C IIC Module for Arduino. It contains a DS1307 real-time clock IC with a backup battery. Its one of the easiest to use RTCs out there, with Arduino and other libraries or simply use I2C commands to set and retrieve the time and date. Includes a lithium coin cell battery which should be good forfour yearsat least. Perfect for use in various electronics projects in India, DS1307 Real Time Clock (RTC) I2C IIC Module AT24C32 without Battery ensures reliability and performance. Ideal for various electronics projects, DS1307 Real Time Clock (RTC) I2C IIC Module AT24C32 without Battery offers quality and performance.
NEO-6M GPS Module with EPROM
- This is a complete GPS module that is based on the NEO 6M GPS. This unit uses the latest technology to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
- The GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-centre software for configuring the GPS and changing the settings and much more. It is really good software (see link below).
MAX7219 8×8 LED Dot Matrix Display Module
he individual module features 88 LEDs, each controlled very precisely bythe MAX7219 driver to generate the color pattern you wish. The great advantage of using this is users will have control over all of the 64 LED by just connecting 3 output communication wires to microcontrollers like Arduino etc. Perfect for use in various electronics projects in India, MAX7219 8x8 LED Dot Matrix Display Module ensures reliability and performance. Ideal for various electronics projects, MAX7219 8x8 LED Dot Matrix Display Module offers quality and performance.
COIN ACCEPTOR Multi Coin Acceptor Coin Slot for Arcade Game Mechanism Vending Machine
Want to detect which coin has been inserted Well then this is the perfect coin selector for you.
This is amulti coin selector module. It can detect and give pulses for upto six different types of coins. Perfect for use in various electronics projects in India, COIN ACCEPTOR Multi Coin Acceptor Coin Slot for Arcade Game Mechanism Vending Machine ensures reliability and performance. Ideal for various electronics projects, COIN ACCEPTOR Multi Coin Acceptor Coin Slot for Arcade Game Mechanism Vending Machine offers quality and performance.
Pro Mini With the bootloader Pro Mini ATMEGA328P 328 Mini ATMEGA328 5V/16MHz
This is Pro Mini 5V/16MHz is a 5V Arduino running the 16MHz boot-loader. Pro Mini ATMEGA328P come without connectors. Perfect for use in various electronics projects in India, Pro Mini With the bootloader Pro Mini ATMEGA328P 328 Mini ATMEGA328 5V/16MHz ensures reliability and performance. Ideal for various electronics projects, Pro Mini With the bootloader Pro Mini ATMEGA328P 328 Mini ATMEGA328 5V/16MHz offers quality and performance.
Ketan (verified owner) –
Good service.
Jayen (verified owner) –
The product is firmly packed.
Rahul (verified owner) –
Good service.
Shubham (verified owner) –
I got my project done with these components Great Support
Rahul (verified owner) –
Good techinical knowledge
Rahul (verified owner) –
Very fast delivery.
Roma (verified owner) –
I got my project done with these components Great Support