-25%
XH 2.5mm 12-Pin Wafer Male Connector – Straight DIP, Tin-Plated
Original price was: ₹5.00.₹3.00Current price is: ₹3.00. + GST
12k Ohm Resistor – 5w
Original price was: ₹15.00.₹8.00Current price is: ₹8.00. + GST
Ardu Nano Board ATmega328P (without solder)
Original price was: ₹240.00.₹180.00Current price is: ₹180.00. + GST
Buy the Ardu Nano V3.0 with ATmega328P and CH340 (Unsoldered). Ideal for compact projects, this breadboard-friendly microcontroller simplifies prototyping for DIY enthusiasts.
20 in stock
Description
The Ardu Nano ATmega328P CH340 Chip (Unsoldered) is a compact, breadboard-friendly microcontroller board perfect for DIY electronics and prototyping projects. Based on the ATmega328P microcontroller and equipped with the CH340 USB-to-Serial driver, it ensures seamless connectivity via a USB port.
This Nano V3.0 variant comes unsoldered, giving users the flexibility to customize pin headers as per their project requirements. Despite its small size, it offers the full capabilities of the Arduino Uno, making it ideal for robotics, IoT projects, and educational kits.
Key Features:
- ATmega328P microcontroller for powerful performance.
- CH340 USB driver for reliable USB connectivity.
- Compact and breadboard-friendly design.
- Comes unsoldered for flexible header configuration.
- Fully compatible with the Arduino IDE for programming.
- Low power consumption, ideal for battery-operated projects.
Benefits:
- Perfect for compact electronics and robotics projects.
- Breadboard-friendly for easy prototyping.
- Flexible and beginner-friendly for students and DIY enthusiasts.
Whether you’re a hobbyist, student, or electronics professional, the  Nano  is your go-to microcontroller for all prototyping needs.
Reviews (7)
7 reviews for Ardu Nano Board ATmega328P (without solder)
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
5V Single Channel Relay Module
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side. Perfect for use in various electronics projects in India, Single Channel 5v Relay Module High Low Level Trigger ensures reliability and performance. Ideal for various electronics projects, Single Channel 5v Relay Module High Low Level Trigger offers quality and performance.
L298N Motor Driver Controller Board
It can control upto 4 DC motors, or 2 DC motors with directional and speed control. It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels in parallel to double the maximum current or in series to double the maximum input voltage. Perfect for use in various electronics projects in India, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - ensures reliability and performance. Ideal for various electronics projects, L298N Motor Driver Controller Board Module | Dual H-Bridge DC Stepper Driver for Arduino | NodeMCU | Raspberry Pi Development Board - offers quality and performance.
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
- The Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control offers 3 modes to check servos or ESC. The Manual Mode allows you to turn the knob to different speeds and check the reaction time. The Neutral mode makes the servo go back to the neutral point. The Automatic Window Wiper Mode makes the servo swing like a window wiper in the largest angle possible.
- Plus, this servo tester can connect to up to 3 servos simultaneously. You can also connect up to 3 ESCs to test and compare their reaction time respectively
- DNA Solutions has large collection of various types of Motor Driver Module. Check our complete collection of Motor Driver Modules.
6 x 4 cm Single Slided PCB Board, Phenolic
PCB Board Universal - Perforated 6x4 (cm) General purpose board primarily used for components & IC for quick testing, sample circuite, experiments, learning etc. Perfect for use in various electronics projects in India, Copper Clad Single Sided Circuit Board, Phenolic -A Grade P (6*4inch) ensures reliability and performance. Ideal for various electronics projects, Copper Clad Single Sided Circuit Board, Phenolic -A Grade P (6*4inch) offers quality and performance.
NRF24L01 2.4GHz Wireless Transceiver Module
- Has on board antenna. The nRF24L01 is a single chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced ShockBurst), designed for ultra low power wireless applications.
- The nRF24L01 is designed for operation in the world wide ISM frequency band at 2.400 - 2.4835GHz. An MCU (microcontroller) and very few external passive components are needed to design a radio system with the nRF24L01. The nRF24L01 is configured and operated through a Serial Peripheral Interface (SPI.) Through this interface the register map is available. The register map contains all configuration registers in the nRF24L01 and is accessible in all operation modes of the chip.
- The embedded baseband protocol engine (Enhanced ShockBurst) is based on packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Internal FIFOs ensure a smooth data flow between the radio front end and the systems MCU. Enhanced ShockBurst reduces system cost by handling all the high-speed link layer operations. The radio front end uses GFSK modulation. It has user configurable parameters like frequency channel, output power and air data rate.
- DNA Solutions has large collection of various types of Transceiver Module. Check our complete collection of Transceiver Module
NEO-6M GPS Module with EPROM
- This is a complete GPS module that is based on the NEO 6M GPS. This unit uses the latest technology to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
- The GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-centre software for configuring the GPS and changing the settings and much more. It is really good software (see link below).
Finger Print Sensor Module – R307
This is the R307 Optical Fingerprint Reader Sensor Module. R307 fingerprint module is a fingerprint sensor with a TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter. The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person. Perfect for use in various electronics projects in India, Finger Print Sensor Module - R307 ensures reliability and performance. Ideal for various electronics projects, Finger Print Sensor Module - R307 offers quality and performance.
Ketan (verified owner) –
Good service.
Jayen (verified owner) –
The product is firmly packed.
Rahul (verified owner) –
Good service.
Shubham (verified owner) –
I got my project done with these components Great Support
Rahul (verified owner) –
Good techinical knowledge
Rahul (verified owner) –
Very fast delivery.
Roma (verified owner) –
I got my project done with these components Great Support