CD4047- Low Power Monostable/Astable Multivibrator IC DIP-14 PIN IC
Original price was: ₹18.00.₹13.94Current price is: ₹13.94. + GST
90 in stock
- It requires an external capacitor?(between pins 1 and 3) and an external resistor?(between pins 2 and 3) to determine the output pulse width?in the monostable mode, and the output frequency in the?astable mode.
Astable operation is enabled by a high level on the astable?input or low level on the astable input. The output frequency?(at 50% duty cycle) at Q and Q outputs is determined?by the timing components. A frequency twice that of?Q is available at the Oscillator Output; a 50% duty cycle is?not guaranteed.
Monostable operation is obtained when the device is triggered?by LOW-to-HIGH transition at + trigger input or?HIGH-to-LOW transition at ? trigger input. The device can?be retriggered by applying a simultaneous LOW-to-HIGH?transition to both the + trigger and retrigger inputs.?A high level on Reset input resets the outputs Q to LOW, Q?to HIGH.
23 reviews for CD4047- Low Power Monostable/Astable Multivibrator IC DIP-14 PIN IC
You must be logged in to post a review.
Related products
-
Crystal Oscillator 8 MHZ
Original price was: ₹15.00.₹6.72Current price is: ₹6.72. + GSTAdd to cartThis is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC’s which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
-
Crystal Oscillator 16 MHZ
Original price was: ₹15.00.₹6.72Current price is: ₹6.72. + GSTAdd to cartCrystal Oscillators are used as a quick and easy way to offer circuits a very accurate and consistent frequency output. This 16 MHz Crystal is a thru-hole type and is typically used with microcontrollers. -
16 X 2 (1602) Yellow (Green) LCD Display
Original price was: ₹112.00.₹91.82Current price is: ₹91.82. + GSTAdd to cart- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 58 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
Perfect for use in various electronics projects in India, Lcd 16X2 Yellow Backlight Alphanumeric Display for 8051,Avr,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green) ensures reliability and performance. Ideal for various electronics projects, Lcd 16X2 Yellow Backlight Alphanumeric Display for 8051,Avr,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green) offers quality and performance.
-
1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant
Original price was: ₹1.15.₹0.82Current price is: ₹0.82.Read more1N4007 is an axial leaded general purpose rectifier in DO-41 package. This device features epoxy flame retardant, low forward voltage drop and high current capability and high reliability. Perfect for use in various electronics projects in India, 1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant ensures reliability and performance. Ideal for various electronics projects, 1N4007 -1000V ,1A |DIP Rectifier Diode Rohs Lead-free Compliant offers quality and performance.
-
DHT11 Temperature and Humidity sensor
Original price was: ₹120.00.₹65.00Current price is: ₹65.00. + GSTAdd to cartThe DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
Ketan (verified owner) –
Less cost than other websites
Harsh (verified owner) –
Good support and recommended
Prakash (verified owner) –
Very well worth the money.
Ketan (verified owner) –
Less cost than other websites
Zohar (verified owner) –
Drone parts i ordered and found ok
Lokesh (verified owner) –
Online best cost electronic components
Lokesh (verified owner) –
Good support and recommended
Harsh (verified owner) –
Good quality.
Komal (verified owner) –
Good support and recommended
Akshay (verified owner) –
Very well worth the money.
Sneha (verified owner) –
Less cost than other websites
Jayen (verified owner) –
Very well worth the money.
Vikas (verified owner) –
The product is firmly packed.
Paaji (verified owner) –
The product is firmly packed.
Viral (verified owner) –
The product is firmly packed.
Vivek (verified owner) –
Good service.
Rahul (verified owner) –
Drone parts i ordered and found ok
Vikas (verified owner) –
Very well worth the money.
Priya (verified owner) –
Best cost electronic components in India
Mayur (verified owner) –
Drone parts i ordered and found ok
Harsh (verified owner) –
Online best cost electronic components
Devendra (verified owner) –
I got my project done with these components Great Support
Devendra (verified owner) –
Good service.