0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module
Original price was: ₹259.00.₹156.00Current price is: ₹156.00. + GST
Specifications:
| Display Size | 0.91 Inch |
| Resolution | 128 x 32 Pixels |
| Controlling Chip | SSD1306 |
| Display Area | 22.384 x 5.584mm |
| Driving Voltage | 3-5V |
| Interface Type | IIC |
| Operating Temperature | -40~70 Celsius |
| Pixel Color | White |
| Length (mm) | 38.0 |
| Width (mm) | 12.0 |
| Height (mm) | 2.6 |
| Weight (gm) | 3 |
Perfect for use in various electronics projects in India, 0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module ensures reliability and performance. Ideal for various electronics projects, 0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module offers quality and performance.
6 in stock
- This 0.91 I2C OLED Display is an OLED monochrome 12832 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. The driver IC is SSD1306 with the I2C interface. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3V-5V microcontroller, such as Arduino.
Key Applications: Used widely in electronic circuits, automation, robotics, and educational projects. Optimized for reliable performance in India-specific environments and conditions.
Keywords: 0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module, electronic components India, 0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module buy online, electronic supplies India, 0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module price.
Applications: Suitable for electronics projects, automation, and educational purposes. Widely used in Indian and international markets.
Keywords: 0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module, buy 0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module online, electronics components, 0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module features, 0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module applications, high quality 0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module
You must be logged in to post a review.
Related products
-
Voltage Sensor Module
Original price was: ₹16.00.₹15.08Current price is: ₹15.08. + GSTAdd to cartThis DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
-
BC547 NPN General Purpose Transistor
Original price was: ₹5.00.₹1.17Current price is: ₹1.17. + GSTAdd to cartBC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
-
Optocoupler High Level Relay Module Board 5V 4-CH for PIC ARM DSP AVR | Compatible with Arduno NodeMCU Raspberry Pi | Pack of 1 | Blue (Excellent Quality)
Original price was: ₹139.00.₹136.50Current price is: ₹136.50. + GSTAdd to cartSpecification
- Size : 75mm (length) x 55mm (W) x 19.3mm (height);
- Weight : 80g;
- PCB Color : Blue;
- board four weeks with four screw holes, hole diameter 3.1mm, easy to install and fixed;
- Relay selection of quality loose music relays, SPDT. A common terminal, a normally open, one normally closed terminal;
- optocoupler isolation, good anti-jamming;
- Low pull, high release. Energisation status indicator light, release status LED is off;
- VCC for the system power, JD_VCC for the relay power. Default hair 12V relay, plug the jumper cap to;
- Relay Maximum output : DC 30V/10A, AC 250V/10A
- Wiring : VCC : positive power supply system GND : System power supply negative IN1 IN4 : relay control ports
Perfect for use in various electronics projects in India, Optocoupler High Level Relay Module Board 5V 4-CH for PIC ARM DSP AVR | Compatible with Arduno NodeMCU Raspberry Pi | Pack of 1 | Blue (Excellent Quality) ensures reliability and performance. Ideal for various electronics projects, Optocoupler High Level Relay Module Board 5V 4-CH for PIC ARM DSP AVR | Compatible with Arduno NodeMCU Raspberry Pi | Pack of 1 | Blue (Excellent Quality) offers quality and performance.
-
5V 1 Channel Solid State Relay Board
Original price was: ₹150.00.₹110.00Current price is: ₹110.00. + GSTAdd to cart1-ChannelSolid-State Relay is some what similar to that of a mechanical relay & the difference is that, there is no moving contact in a Solid-State Relay. Here we make use of Phototropic coupler to turn it ON and OFF. Perfect for use in various electronics projects in India, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse ensures reliability and performance. Ideal for various electronics projects, 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse offers quality and performance.
-
16 X 2 (1602) Yellow (Green) LCD Display
Original price was: ₹112.00.₹91.82Current price is: ₹91.82. + GSTAdd to cart- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 58 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Green Backlight
Perfect for use in various electronics projects in India, Lcd 16X2 Yellow Backlight Alphanumeric Display for 8051,Avr,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green) ensures reliability and performance. Ideal for various electronics projects, Lcd 16X2 Yellow Backlight Alphanumeric Display for 8051,Avr,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green) offers quality and performance.
Reviews
There are no reviews yet.