“Original Flex sensor 2.2 inches for Motion and Diy” has been added to your cart. View cart
MUR1660 600V 16A Ultrafast Power Diode
₹62.00 Original price was: ₹62.00.₹27.06Current price is: ₹27.06. + GST
MJE13005A NPN Power Transistor
₹15.00 Original price was: ₹15.00.₹7.89Current price is: ₹7.89. + GST
TIP127 PNP Power Darlington Transistor 100V 5A TO-220 Package
Rated 4.57 out of 5 based on 7 customer ratings
(7 customer reviews)
₹10.00 Original price was: ₹10.00.₹7.10Current price is: ₹7.10. + GST
Specifications:-
| Transistor Polarity | PNP |
| Collector?Emitter Voltage (VCEO) | 100V |
| Collector?Base Voltage (VCBO) | 100V |
| Continuous Collector Current (Ic) | 5A |
| Continuous Base Current (Ib) | 0.12A |
| Emitter Base Voltage (VEBO) | 5V |
| Power Dissipation (Pd) | 65W |
| Operating Temperature Range | -65 – 150?C |
| DC Current Gain (hFE) | 1000 |
32 in stock
SKU:
B-3
Categories: Electronic, Transistors
Description
TIP127 is a three layer PNP device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector emitter voltage VCE.
Features:-
? Low saturation voltage
? Simple drive requirements
? High safe operating area
? For low distortion complementary designs
? Easy to carry and handle
Reviews (7)
7 reviews for TIP127 PNP Power Darlington Transistor 100V 5A TO-220 Package
Add a review Cancel reply
You must be logged in to post a review.
Shipping and Delivery
We deliver all across India.
✅ Orders leave warehouse in 1–2 days.
✅ Delivery within 5–10 days after dispatch.
Related products
BC547 NPN General Purpose Transistor
Rated 4.00 out of 5
BC547 is a general purpose BJT NPN transistor mostly used in electronics hobbyists and educational electronics projects. Besides these uses it can also be used in commercial circuits. It comes in TO-92 packaging and the maximum output current this transistor can handle is 100mA. The transistor is having very good DC current gain and low noise capabilities due to which it is ideal to use in signal amplification stages. The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switch.
5V Single Channel Relay Module
Rated 4.17 out of 5
Relays are output devices which are used to control or operate some external devices. This is a 5 volt Isolated relay module which means that there is a optocoupler used in between your control circuit and the relay thus protecting your circuit in case of any short circuit issues on the relay side. Perfect for use in various electronics projects in India, Single Channel 5v Relay Module High Low Level Trigger ensures reliability and performance. Ideal for various electronics projects, Single Channel 5v Relay Module High Low Level Trigger offers quality and performance.
16 x 2 (1602) Character Blue LCD Display
Rated 5.00 out of 5
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Each character is build by a 58 pixel box
- Can work on both 8-bit and 4-bit mode
- It can also display any custom generated characters
- Available in Blue Backlight
Green 10mm LED
Rated 4.50 out of 5
This is10mm Green LED. The size refers to the outside diameter of the LED, with 5mm being the most common LED model. 3mm LEDs are the smallest and used in tight-fitting applications. 8mm and 10mm models are used to output as much light as possible. Perfect for use in various electronics projects in India, Green 10mm LED ensures reliability and performance. Ideal for various electronics projects, Green 10mm LED offers quality and performance.
74HC595 8-bit Shift Register IC
Rated 4.62 out of 5
The 74HC595 consists of an 8?bit shift register and an 8?bit D?typelatch with three?state parallel outputs. The shift register accepts serialdata and provides a serial output. The shift register also providesparallel data to the 8?bit latch. The shift register and latch haveindependent clock inputs. This device also has an asynchronous resetfor the shift register.The HC595 directly interfaces with the SPI serial data port onCMOS MPUs and MCUs
Voltage Sensor Module
Rated 4.42 out of 5
This DC Voltage Sensor Module is essentially a 5:1 potential divider circuit built using precession resistors for high accuracy.
The Arduino analog input is limited to a 5 VDC input. If you wish to measure higher voltages,this module allows you to measure voltages of 0-25V. Keep in mind, you are restricted to voltages that are less than 25 volts. More than that and you will exceed the voltage limit of your Arduino input. Perfect for use in various electronics projects in India, Voltage Sensor Module 25V ensures reliability and performance. Ideal for various electronics projects, Voltage Sensor Module 25V offers quality and performance.
DHT11 Temperature and Humidity sensor
Rated 4.67 out of 5
The DHT11 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
8 Channel 5V Relay Board Expansion Module Optocoupler compatible UNO Raspberry
Rated 5.00 out of 5
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)


















Komal (verified owner) –
Very well worth the money.
Er.Prashant (verified owner) –
Best cost electronic components in India
Jayen (verified owner) –
Online best cost electronic components
Devendra (verified owner) –
Good service.
Shubham (verified owner) –
Good Stem kit
Lokesh (verified owner) –
Online best cost electronic components
Sneha (verified owner) –
Online best cost electronic components