Ne555 12V Digital Timer Relay Module Switch | Adjustable 0 To 10 Seconds
Specifications
-
- Module Properties : NE555 chip
-
- Input voltage : DC 12 Volts
-
- Adjustable time : Within 10 seconds
-
- Dimension : 77 (L) * 23 (W) * 18 (H) mm (with potentiometer)
-
- Control voltage : AC 0~250V / max. 10A, DC 0~30V / max. 10A
-
- Max. loading : 2200W
Imax B3AC Lipo Charger | Lithium Lipo RC Battery Balance Charger
Specification
| Input Voltage (V AC) | 100 ~ 240 |
| Charge Current Range (A) | 3 x 800mA |
| Li-ion/Po cell count | 2 ~ 3 |
| Dimensions (mm) LxWxH | 95x55x32 |
| Weight (gm) | 160 |
| Cable length | 0.5m |
| Shipment Weight | 0.18 kg |
| Shipment Dimensions | 14 10 5 cm |
ESP8266 WiFi Module
- ESP-12E is an enhanced version ESP8266-12, improve the external circuit, enhanced impedance signal output is better, whether it is stable or anti-jamming capability, have been greatly improved ! Before selecting a user for ESP-12 's, it does not matter even if the product has been made , enhanced version is fully compatible with previous firmware pin has added the ESP-12 on the basis of six IO ports , SPI mouth leads , develop more convenient, application more extensive.
- DNA Solutions has large collection of various types of Transceiver Module. Check our complete collection of Transceiver Module
A2212 1000KV BLDC Brushless Motor for Drone Soldered Connector without connector
- Operating voltage: 7.2V to 12V (2 to 3Li-poly or 6to10 NiCad)
- No load current:0.5Amp
- Maximum current:13Amp for 60Sec
- Maximum Watts:150 Watt
- Weight of motor:50-60 grams
- Maximum operating temperature: + 80C
- Complete speed control because of three phase connection.
- Long life as there are no moving contacts.
Solar, Wind & Hydro Combo Kit – 3-in-1 Renewable Energy DIY Project
✔️ 3 Renewable Energy Models in One Kit – Solar, wind, and hydro setups for hands-on exploration.
✔️ 3D-Printed Structures – Durable and lightweight designs, easy to assemble.
✔️ STEM Learning Focused – Ideal for students, hobbyists, and classrooms looking to learn practically.
✔️ Real Power Generation – All three models demonstrate real-time electricity generation by lighting up LEDs.
✔️ Eco-Friendly Education – Promotes awareness of clean, green, and sustainable energy solutions.
✔️ No Special Tools Required – Simple plug-and-play components, perfect for beginners.
✔️ 3D-Printed Structures – Durable and lightweight designs, easy to assemble.
✔️ STEM Learning Focused – Ideal for students, hobbyists, and classrooms looking to learn practically.
✔️ Real Power Generation – All three models demonstrate real-time electricity generation by lighting up LEDs.
✔️ Eco-Friendly Education – Promotes awareness of clean, green, and sustainable energy solutions.
✔️ No Special Tools Required – Simple plug-and-play components, perfect for beginners.
3D-Printed Hydro Hydro Power Generator Kit – DIY Renewable Energy Project – 095
✔️ Complete DIY Kit – Includes a 3D-printed hydro turbine, waterwheel mount, LED, and wires.
✔️ Real-Time Power Generation – Generates electricity using flowing water and lights up an LED.
✔️ 3D-Printed Components – Durable and lightweight design made for educational demonstrations.
✔️ Educational & Fun – Perfect for STEM education, school projects, and science exhibitions.
✔️ No Battery Needed – 100% powered by water, promoting eco-awareness and clean energy.
✔️ Simple Assembly – Easy to put together, suitable for beginners and students.
✔️ Real-Time Power Generation – Generates electricity using flowing water and lights up an LED.
✔️ 3D-Printed Components – Durable and lightweight design made for educational demonstrations.
✔️ Educational & Fun – Perfect for STEM education, school projects, and science exhibitions.
✔️ No Battery Needed – 100% powered by water, promoting eco-awareness and clean energy.
✔️ Simple Assembly – Easy to put together, suitable for beginners and students.
MG995 Based Door Lock Mechanism (Without Servo Motor)-(033)
✔️ MG995 Servo Motor Powered – Provides strong and reliable locking with precise movement.
✔️ Easy Integration – Compatible with Arduino, Raspberry Pi, and other microcontrollers.
✔️ Low Power Consumption – Operates efficiently with a 5V-7.2V power supply.
✔️ Multiple Control Options – Can be triggered via keypad, RFID, Bluetooth, or WiFi.
✔️ Durable & Lightweight – 3D-printed housing for sturdy and compact design.
✔️ Easy Installation – Pre-drilled mounting holes for quick and secure setup.
✔️ Easy Integration – Compatible with Arduino, Raspberry Pi, and other microcontrollers.
✔️ Low Power Consumption – Operates efficiently with a 5V-7.2V power supply.
✔️ Multiple Control Options – Can be triggered via keypad, RFID, Bluetooth, or WiFi.
✔️ Durable & Lightweight – 3D-printed housing for sturdy and compact design.
✔️ Easy Installation – Pre-drilled mounting holes for quick and secure setup.
Top mount 16×2 LCD Display Holder for DIY Projects – 049
- Top-Mount Design: Ideal for projects requiring a clear top-facing LCD display.
- Universal Fit: Compatible with all standard 16x2 LCD displays.
- High-Quality Material: Crafted from PLA+, ensuring strength, durability, and eco-friendliness.
- Ease of Use: Pre-drilled holes for easy and quick installation.
- Compact and Lightweight: Suitable for portable and compact setups.
Rack and Pinion (For MG995 Motor) For Robotics Projects+ Servo Motor Included (Rack Length 285mm) – 027
- Color: Unique due to 3D printing, color may vary.
- Material: Strong and lightweight PLA (Polylactic Acid).
- Rack Size: 285 mm – optimized for precise linear motion.
- Compatibility: Specifically designed for MG995 servo motors.
- Precision Design: Smooth operation with minimal backlash.
- Mounting: Includes mounting holes for effortless integration.
- Applications: Robotics, CNC machines, automation systems, prototyping, and educational projects.
Ardui UNO Case (Note* Ardui Uno Board Not Included) – 038
-
- Perfect Fit: Designed specifically for Arduino Uno boards (74mm x 78mm x 20mm) for a snug fit.
- Durable PLA Construction: Made from robust PLA plastic for long-term durability.
- Color Variety: Choose from various colors to suit your setup.
- Includes Screws: Comes with screws for easy assembly and secure mounting.
- Ventilated Design: Ensures proper airflow to keep your Arduino Uno cool.
DC Crocodile Alligator Clip Black and Red Pair
16X2 LCD Case With Nuts – (LCD Not Included) – 002
- Precision-fit PLA+ case for 16X2 LCD displays (*LCD not included).
- Dimensions: L x W x H = 8.6cm x 4.2cm x 2cm.
- Lightweight, durable, and easy to assemble with included nuts.
- Ideal for electronics, robotics, and educational projects in India.
- Quality-tested, made in India, and optimized for reliability.