Search Results for: microcontroller
Showing 17–32 of 38 results
-
Crystal Oscillator 4 Mhz
Original price was: ₹10.00.₹6.77Current price is: ₹6.77. + GSTAdd to cartFeatures:
- Crystal Case Type : Metal Can
- Crystal Mounting Type : Through Hole
- Frequency :?4MHZ
- Frequency Stability: ? 50ppm
- Frequency Tolerance: ? 30ppm
- Load Capacitance: 10 pF
- No. of Pins: 2
- Operating Temperature Max: 70 ?C
- Operating Temperature Min: -10 ?C
- Operating Temperature Range: -10?C to +70?C
-
ATTINY85 ic
Original price was: ₹192.00.₹182.00Current price is: ₹182.00. + GSTAdd to cartFeatures of ATtiny85 Microcontroller
- Flash (Kbytes) :?8 Kbytes
- Pin Count :?8
- Max. Operating Freq. (MHz) :?20 MHz
- CPU :?8-bit AVR
- Number of Touch Channels :?3
- Hardware QTouch Acquisition :?No
- Max I/O Pins :?6
- Ext Interrupts :?6
- USB Interface :No
-
Mega 2560 PRO MINI 5V ATmega2560-16AU NO Pin Headers Development Board For Arduino
Original price was: ₹1,949.00.₹1,320.77Current price is: ₹1,320.77. + GSTAdd to cartSpecification
- Microcontroller : ATmega 2560
- USB-TTL converter : CH340g
- Power Out : 5 Volt – 800mA
- Power IN. : 5 Volt
- Power IN. VIN/DC Jack : 5 Volt
- Power Consumption :?5 Volt,? 220mA
- Logic Level : 5 Volt
- USB : Micro USB
- Clock Frequency : 16MHz
- Operating Supply Voltage : 5 Volt
- Digital I/O?: 54
- Analog I/O : 16
- Memory Size : 256kb
- Data RAM Type/Size : 8Kb
- Data ROM Type/Size : 4Kb
- Interface Type : ISP
- Operating temperature : ?40??/+85??
-
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
Original price was: ₹80.00.₹61.63Current price is: ₹61.63. + GSTAdd to cartSpecification
Driver IC TM1637 Input Voltage (V) 3.3 to 5.5 Max. Operating Current (mA) 30 Length (mm) 42 Width (mm) 24 Height (mm) 12 Weight (gm) 10 Shipment Weight 0.015 kg Shipment Dimensions 5 ? 3 ? 2 cm -
ATTINY85V2 Digispark ATTiny85 USB Development Board Digistump Mini
Original price was: ₹400.00.₹210.00Current price is: ₹210.00. + GSTAdd to cartSpecification
-
- Support for the IDE 1.0+ (OSX / Win / Linux)
- Power via USB or External Source – 5V or 7 -35V (automatic selection)
-
- On-board 500ma 5V Regulator
-
- Built-in USB(and serial debugging)
-
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB)
-
- 8k Flash Memory (about 6K after bootloader)
-
- I2C and SPI(vis USI)
-
- PWM on 3 pins (more possible with Software PWM)
-
- ADC on 4 pins
-
- Power LED and Test/ Status LED (on Pin0)
-
- Weight : 4g
-
-
4 X 4 Matrix Membrane Keypad | 4×4 Matrix Keypad Membrane Switch For Arduino, Raspberry, Arm and Other MCU | 16 key switch keypad module
Original price was: ₹60.00.₹41.87Current price is: ₹41.87. + GSTAdd to cartSpecification
-
- Ultra-thin design & adhesive backing provides easy integration to any project
-
- Excellent price-performance ratio
-
- Easy communication with any microcontroller
-
- 5 pins 2.54mm pitch connector,?4x 4type 16 keys.
-
- The sticker can peel off for adhesive mounting.
-
- Used widely in industrial and home electronic equipment, instrument, etc.
-
- This allows a microcontroller to scan? the 8 output pins to see which of the 16 buttons is being pressed.
-
-
PZIN51000043 Imported St-Link V2 Programming Unit Mini Metal Shell Stm8 Stm32 Emulator Dow
Original price was: ₹450.00.₹197.00Current price is: ₹197.00. + GSTAdd to cartST-Link V2 Programmer For STM8 and STM32 is fully consistent with the official version, support for automatic upgrades, support the full range?STM32 SWD?(only 4pins including SWCLK, SWDIO, and power)?and a full range?STM8 SWIM?(only 4pins including SWIM, Reset and power) download and debug. Use this device to send program code to the 32-bit STM32 ARM Cortex …
PZIN51000043 Imported St-Link V2 Programming Unit Mini Metal Shell Stm8 Stm32 Emulator DowRead More
-
GY-906 MLX90614ESF Module, MLX90614 Contactless Temperature Sensor Module GY-906
Original price was: ₹2,000.00.₹1,062.91Current price is: ₹1,062.91. + GSTAdd to cartSpecification
-
- Small size, low cost
-
- Mounted on a breakout board with two types of pins
-
- 10k Pull up resistors for the I2C interface with optional solder jumpers
-
- Easy to integrate
-
- Factory calibrated in wide temperature range
-
- -40 125C for sensor temperature and
-
- -70 380C for object temperature.
-
- High accuracy of 0.5C over wide temperature range
-
- (0,50 C for both Ta and To) High (medical) accuracy calibration
-
- Measurement resolution of 0.02C
-
- Single and dual zone versions
-
- SMBus compatible digital interface
-
- Customizable PWM output for continuous reading
-
- Simple adaptation for 816V applications
-
- Sleep mode for reduced power consumption
-
- Different package options for applications and measurements versatility
-
- Automotive grade
-
-
0.96″ 128 X 64 Blue Light I2C OLED Screen Display Module For DIY
Original price was: ₹211.00.₹166.36Current price is: ₹166.36. + GSTAdd to cart- The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes display board,display, 4 pin male header pre-soldered to board.
- OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
- OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
-
IRFZ44N MOSFET – 55V 49A N-Channel Power MOSFET TO-220 Package
Original price was: ₹30.00.₹20.12Current price is: ₹20.12. + GSTAdd to cartThe IRFZ44N is known for its high drain current and fast switching speed. Adding to that it also has a low Rds value which will help in increasing the efficiency of switching circuits. The MOSFET will start turning on with a small gate voltage of 4V, but the drain current will be maximum only when a gate voltage of 10V is applied. If the mosfet has to be driven directly from a microcontroller like Arduino then try the logic level version IRLZ44N mosfet.
-
24V 1/2w Zener Diode
Original price was: ₹5.00.₹1.64Current price is: ₹1.64. + GSTAdd to cart- Used in Voltage protection circuits
- Can be used as low current voltage regulator
- Input voltage protection for Microcontrollers or other IC?s
- Voltage stabilizing circuits
-
Nano CH340 Chip Board without USB cable compatible with Arduino
Original price was: ₹388.00.₹240.50Current price is: ₹240.50. + GSTAdd to cartArduino NANO Version 3 is the open source smallest Embedded Development board launched by Arduino based on Atmega328 SMD Package Microcontroller. It is a Surface mount Breadboard Friendly board integrated with Mini USB Port. DC Power Jack is not available on this Board, so power can be given through Mini USB Cable. It automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.
-
Light Dependent Register- Photo Resistor
Original price was: ₹10.00.₹5.00Current price is: ₹5.00. + GSTAdd to cartThe Light Dependent Resistor (LDR) is just another special type of Resistor and hence has no polarity. Meaning they can be connected in any direction. They are breadboard friendly and can be easily used on a perf board also. The symbol for LDR is just as similar to Resistor but adds to inward arrows as shown above. The arrows indicate the light signals.
-
Pro Mini With the bootloader Pro Mini ATMEGA328P 328 Mini ATMEGA328 5V/16MHz
Original price was: ₹700.00.₹498.00Current price is: ₹498.00. + GSTAdd to cartThis is Pro Mini 5V/16MHz is a 5V Arduino running the 16MHz boot-loader. Pro Mini ATMEGA328P come without connectors.
-
Finger Print Sensor Module – R307
Original price was: ₹1,500.00.₹832.00Current price is: ₹832.00. + GSTAdd to cartThis is the R307 Optical Fingerprint Reader Sensor Module. R307 fingerprint module is a fingerprint sensor with a TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter. The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person.
-
GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module
Original price was: ₹180.00.₹99.00Current price is: ₹99.00.Add to carte MPU6050 is a Micro Electro-Mechanical Systems (MEMS) which consists of a 3-axis Accelerometer and 3-axis Gyroscope inside it. This helps us to measure acceleration, velocity, orientation, displacement and many other motion related parameter of a system or object. This module also has a (DMP) Digital Motion Processor inside it which is powerful enough to perform complex calculation and thus free up the work for Microcontroller.