Search Results for: I2C
Showing 1–16 of 17 results
-
ADS1115 16-Bit I2C ADC 4-Channel Programmable Gain Amplifier Module
Original price was: ₹185.00.₹156.00Current price is: ₹156.00. + GSTAdd to cartFeatures
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
- It has an Internal low-drift voltage reference
- Internal Oscillator.
- Internal PGA.
- I2C INTERFACE : Pin-Selectable Addresses.
- Four single ends Or Two differential inputs.
-
CJMCU-219 INA219 I2C Zero Drift Bi-directional Power Monitoring Module
Original price was: ₹300.00.₹159.90Current price is: ₹159.90. + GSTAdd to cartTECHNICAL DETAILS Uses the INA219B chip, see datasheet for detailed specifications 0.1 ohm 1% 2W current sense resistor Up to +26V target voltage Up to ?3.2A current measurement, with ?0.8mA resolution 0.9″ x 0.8″ PCB This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with jumpers
-
0.91 inch I2C/IIC 128×32 Serial 4-Pin OLED Display Module
Original price was: ₹259.00.₹156.00Current price is: ₹156.00. + GSTAdd to cartSpecifications:
Display Size 0.91 Inch Resolution 128 x 32 Pixels Controlling Chip SSD1306 Display Area 22.384 x 5.584mm Driving Voltage 3-5V Interface Type IIC Operating Temperature -40~70 Celsius Pixel Color White Length (mm) 38.0 Width (mm) 12.0 Height (mm) 2.6 Weight (gm) 3 -
1.3 inch Blue OLED Display Module with I2C/IIC Serial Interface for boards compatible with Arduino
Original price was: ₹500.00.₹278.41Current price is: ₹278.41. + GSTRead more- This is small 1.3″ I2C interface OLED 128×64 dot matrix Display module.?This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino or any Microcontroller project. The connection of this display with Arduino is made through I2C interface.
- The SH1106 1.3 Inch 128?64 OLED Display Screen Module produces blue text on black background with very good contrast when supplied with DC 3.3 Volts to 5 Volts supply. The OLED Display Modules also offers a very wide viewing angle of about greater than 160?
-
0.96″ 128 X 64 Blue Light I2C OLED Screen Display Module For DIY
Original price was: ₹211.00.₹166.36Current price is: ₹166.36. + GSTAdd to cart- The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes display board,display, 4 pin male header pre-soldered to board.
- OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
- OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
-
IIC/I2C Serial Interface Adapter Module
Original price was: ₹105.00.₹52.00Current price is: ₹52.00. + GSTAdd to cartThis is a RoHS compliant I2C Serial LCD Daughter board that can be connected to a standard?16?2 or 20?4 Character Display Module that supports 4-bit mode. All Character Modules sold on our site support 4-bit mode, and nearly all commercially available 16?2 and 20?4 line character modules support it too.
This board has a?PCF8574?I2C chip that converts I2C serial data to parallel data for the LCD display. There are many examples on the internet for using this board with Arduino. Do a search for ?Arduino LCD?PCF8574?. The I2C address is 0x3F by default, but this can be changed via 3 solder jumpers provided on the board. This allows up to 3 LCD displays to be controlled via a single I2C bus (giving each one it?s own address)
-
DS1307 Real Time Clock (RTC) I2C IIC Module AT24C32 without Battery
Original price was: ₹80.00.₹48.90Current price is: ₹48.90. + GSTAdd to cartThis is Tiny RTC Real Time Clock DS1307 I2C IIC Module for Arduino. It contains a DS1307 real-time clock IC with a backup battery. It?s one of the easiest to use RTCs out there, with Arduino and other libraries or simply use I2C commands to set and retrieve the time and date. Includes a lithium coin cell battery which should be good for?four years?at least.
-
4 Channel Logic Level Converter
Original price was: ₹60.00.₹52.00Current price is: ₹52.00. + GSTRead moreThis Level Converter- 4 Channel features four high speed bi-directional 4 channels, allowing for safe and easy communication between devices operating at different logic levels. It can convert signals as low as 1.8 V to as high as 5 V and vice versa, and its four channels are enough to support most common bidirectional and …
-
Raspberry Pi Pico
Original price was: ₹450.00.₹341.00Current price is: ₹341.00. + GSTAdd to cartRP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 ? multi-function GPIO pins 2 ? SPI, 2 ? I2C, 2 ? UART, 3 ? 12-bit ADC, 16 ? controllable PWM channels Onboard temperature sensor
-
MAX30102 Pulse Oximeter Heart Rate Sensor Module
Original price was: ₹145.00.₹110.50Current price is: ₹110.50. + GSTAdd to cartFeatures
- Integrated pulse oximetry and heart rate monitor sensor solution.
- Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End
- Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package
- Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
- Programmable Sample Rate and LED Current for Power Savings
- Ultra-Low Shutdown Current (0.7?A, typ)
- Advanced Functionality Improves Measurement Performance
- High SNR Provides Robust Motion Artifact Resilience
- Integrated Ambient Light Cancellation
- High Sample Rate Capability
- Fast Data Output Capability
-
Bmp180 Digital Barometric High Precision Pressure Sensor Board Module
Original price was: ₹50.00.₹35.26Current price is: ₹35.26. + GSTAdd to cartApplications
- Indoor navigation
- GPS-enhancement for dead-reckoning, slope detection, etc.
- Sport devices, e.g. altitude profile
- Weather forecast
- Vertical velocity indication (rise/sink speed)
-
MAX30100 Oximeter Heart Rate Beat Pulse Sensor 1.8V-3.3V Replace MAX30100 A5N2
Original price was: ₹250.00.₹106.92Current price is: ₹106.92. + GSTAdd to cartSpecification
- Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design
- Integrated LEDs, Photo Sensor, and High-Performance Analog Front-End
- Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package
- Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
- Programmable Sample Rate and LED Current for Power Savings
- Ultra-Low Shutdown Current (0.7?A, typ)
- Advanced Functionality Improves Measurement Performance
- High SNR Provides Robust Motion Artifact Resilience
- Integrated Ambient Light Cancellation
- High Sample Rate Capability
- Fast Data Output Capability
-
ATTINY85V2 Digispark ATTiny85 USB Development Board Digistump Mini
Original price was: ₹400.00.₹210.00Current price is: ₹210.00. + GSTAdd to cartSpecification
-
- Support for the IDE 1.0+ (OSX / Win / Linux)
- Power via USB or External Source – 5V or 7 -35V (automatic selection)
-
- On-board 500ma 5V Regulator
-
- Built-in USB(and serial debugging)
-
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB)
-
- 8k Flash Memory (about 6K after bootloader)
-
- I2C and SPI(vis USI)
-
- PWM on 3 pins (more possible with Software PWM)
-
- ADC on 4 pins
-
- Power LED and Test/ Status LED (on Pin0)
-
- Weight : 4g
-
-
BMP280 3.3 Digital Barometric Pressure Altitude Sensor High Precision Atmospheric Module Replace BMP180
Original price was: ₹65.00.₹37.74Current price is: ₹37.74. + GSTAdd to cartSpecification
Operating voltage (v) 1.71 ~ 3.6 Peak current 1.12mA Operating Pressure 300 hPa ~ 1100 hPa. Operating Temperature -40 ~ +85 °C Length (mm) 15 Width (mm) 12 Height (mm) 2 Weight (gm) 2 Shipment Weight 0.005 kg Shipment Dimensions 9 ? 7 ? 5 cm -
GY-906 MLX90614ESF Module, MLX90614 Contactless Temperature Sensor Module GY-906
Original price was: ₹2,000.00.₹1,062.91Current price is: ₹1,062.91. + GSTAdd to cartSpecification
-
- Small size, low cost
-
- Mounted on a breakout board with two types of pins
-
- 10k Pull up resistors for the I2C interface with optional solder jumpers
-
- Easy to integrate
-
- Factory calibrated in wide temperature range
-
- -40 125C for sensor temperature and
-
- -70 380C for object temperature.
-
- High accuracy of 0.5C over wide temperature range
-
- (0,50 C for both Ta and To) High (medical) accuracy calibration
-
- Measurement resolution of 0.02C
-
- Single and dual zone versions
-
- SMBus compatible digital interface
-
- Customizable PWM output for continuous reading
-
- Simple adaptation for 816V applications
-
- Sleep mode for reduced power consumption
-
- Different package options for applications and measurements versatility
-
- Automotive grade
-
-
GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module
Original price was: ₹180.00.₹99.00Current price is: ₹99.00.Add to carte MPU6050 is a Micro Electro-Mechanical Systems (MEMS) which consists of a 3-axis Accelerometer and 3-axis Gyroscope inside it. This helps us to measure acceleration, velocity, orientation, displacement and many other motion related parameter of a system or object. This module also has a (DMP) Digital Motion Processor inside it which is powerful enough to perform complex calculation and thus free up the work for Microcontroller.