Search Results for: LEDs
Showing 1–16 of 18 results
-
Red 0805 (2012 metric) Standard LEDs – SMD
Original price was: ₹3.00.₹1.64Current price is: ₹1.64. + GST -
Pro Mini ATMEGA168PA 5V/16M Improved Version Module
Original price was: ₹290.00.₹280.00Current price is: ₹280.00. + GSTAdd to cart- Microcontroller: The board is powered by the ATmega168PA microcontroller chip, which operates at 5V voltage and has a clock speed of 16MHz. This microcontroller offers a good balance of processing power and energy efficiency for a wide range of tasks.
- Improved Design: This version of the Pro Mini features enhancements over previous iterations, potentially including improvements in power efficiency, stability, and overall performance. These enhancements make it more reliable and efficient for use in diverse projects.
- Compact Form Factor: The Pro Mini module is designed to be compact and lightweight, making it suitable for applications where space is limited. Its small size allows for easy integration into various projects and enclosures.
- On-Board Components: The module comes with essential on-board components, including voltage regulator, crystal oscillator, reset button, and indicator LEDs. These components simplify the setup process and provide convenient debugging options.
- Easy Programming: The board can be easily programmed using a USB-to-serial adapter or an FTDI breakout board. It is compatible with the Arduino IDE, allowing users to write and upload code effortlessly for their projects.
- Versatile Connectivity: The Pro Mini features a standard 6-pin header for serial communication (TX, RX, GND), as well as digital I/O pins for connecting sensors, actuators, displays, and other peripherals. It also has analog input pins for reading sensor data.
- Low Power Consumption: With its optimized design and power-efficient components, the Pro Mini module is capable of operating on low power, making it suitable for battery-powered applications and energy-conscious projects.
-
3mm DIP Led Orange
Original price was: ₹3.00.₹1.00Current price is: ₹1.00. + GSTAdd to cart- Choice of various viewing angles
- Available on tape and reel
- Reliable and robust
- Pb free
- The product itself will remain within RoHS compliant version Applications
-
UNO based Professional Electronics Starter DIY Kit
Original price was: ₹1,699.00.₹906.57Current price is: ₹906.57. + GSTRead moreElectronics Starter DIY Kit withUNO SMD, Uno Cable, LEDs, Buzzer, Switch, Breadboard, Servo SG90 Motor, PIR Motion Sensor, Ultrasonic Sensor, LCD 16×2, 4×4 Keypad, Relay board, Male Header Strips and Jumper Wires Electronics Starter DIY KIT  contains UNO SMD with Cable + 20 Pieces Each Jumper (MM/MF/FF) + 3 Pieces Each 1×40 Header Strips …
-
170 Points Mini Breadboard SYB-170 White
Original price was: ₹17.00.₹16.00Current price is: ₹16.00. + GSTAdd to cartFeatures :
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Accepts 20-29 AWG wire sizes.
- Adhesive-backed for permanent mounting.
- Phosphor bronze nickel plated spring clips
-
Proto Shield (Prototype) for Arduino Uno Mini Breadboard
Original price was: ₹120.00.₹81.18Current price is: ₹81.18. + GSTAdd to cartIt has a nice standard 0.1?x0.1? prototyping grid with big pads Comes with Stacking headers and plain header, choose whichever you want when soldering together An IC pattern for adding DIP ICs up to 20 pins Power rails down the middle and sides A reset button and an extra general use button Two 3mm general …
Proto Shield (Prototype) for Arduino Uno Mini BreadboardRead More
-
MAX30102 Pulse Oximeter Heart Rate Sensor Module
Original price was: ₹145.00.₹110.50Current price is: ₹110.50. + GSTAdd to cartFeatures
- Integrated pulse oximetry and heart rate monitor sensor solution.
- Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End
- Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package
- Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
- Programmable Sample Rate and LED Current for Power Savings
- Ultra-Low Shutdown Current (0.7?A, typ)
- Advanced Functionality Improves Measurement Performance
- High SNR Provides Robust Motion Artifact Resilience
- Integrated Ambient Light Cancellation
- High Sample Rate Capability
- Fast Data Output Capability
-
LM3915 LED Dot/Bar Display Driver IC DIP-18 Package
Original price was: ₹40.00.₹28.93Current price is: ₹28.93. + GSTAdd to cartSpecification:-
Parameter Value Power Dissipation (3) PDIP (NFK) 1365 mW 1365 mW Supply Voltage 25V Voltage on Output Drivers 25V Input Signal Overvoltage +-35V Divider Voltage -100mV to V+ Reference Load Current 10 mA Storage Temperature Range -55?C to 150?C Lead Temperature (Soldering, 10 sec.) 260?C ?
-
LM3914 Dot/Bar Display Driver IC DIP-18 Package
Original price was: ₹78.00.₹22.10Current price is: ₹22.10. + GSTRead moreThe LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resistors. This feature is one that allows operation of the whole system from less than 3V.
The circuit contains its own adjustable reference and accurate 10-step voltage divider. The low-bias-current input buffer accepts signals down to ground, or V?, yet needs no protection against inputs of 35V above or below ground. The buffer drives 10 individual comparators referenced to the precision divider. Indication non-linearity can thus be held typically to ?%, even over a wide temperature range.
Versatility was designed into the LM3914 so that controller, visual alarm, and expanded scale functions are easily added on to the display system. The circuit can drive LEDs of many colors, or low-current incandescent lamps. Many LM3914s can be ?chained? to form displays of 20 to over 100 segments. Both ends of the voltage divider are externally available so that 2 drivers can be made into a zero-center meter.
The LM3914 is very easy to apply as an analog meter circuit. A 1.2V full-scale meter requires only 1 resistor and a single 3V to 15V supply in addition to the 10 display LEDs. If the 1 resistor is a pot, it becomes the LED brightness control. The simplified block diagram illustrates this extremely simple external circuitry.
When in the dot mode, there is a small amount of overlap or ?fade? (about 1 mV) between segments. This assures that at no time will all LEDs be ?OFF?, and thus any ambiguous display is avoided. Various novel displays are possible.
Much of the display flexibility derives from the fact that all outputs are individual, DC regulated currents. Various effects can be achieved by modulating these currents. The individual outputs can drive a transistor as well as a LED at the same time, so controller functions including ?staging? control can be performed. The LM3914 can also act as a programmer, or sequencer.
The LM3914 is rated for operation from 0?C to +70?C. The LM3914N-1 is available in an 18-lead PDIP (NFK) package.
-
MAX30100 Oximeter Heart Rate Beat Pulse Sensor 1.8V-3.3V Replace MAX30100 A5N2
Original price was: ₹250.00.₹106.92Current price is: ₹106.92. + GSTAdd to cartSpecification
- Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design
- Integrated LEDs, Photo Sensor, and High-Performance Analog Front-End
- Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package
- Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
- Programmable Sample Rate and LED Current for Power Savings
- Ultra-Low Shutdown Current (0.7?A, typ)
- Advanced Functionality Improves Measurement Performance
- High SNR Provides Robust Motion Artifact Resilience
- Integrated Ambient Light Cancellation
- High Sample Rate Capability
- Fast Data Output Capability
-
Ne555 DC12V Digital Delay Timer | Relay Timer Module Switch | Adjustable 0 To 10 Seconds
Original price was: ₹150.00.₹101.60Current price is: ₹101.60. + GSTAdd to cartSpecifications
-
- Module Properties : NE555 chip
-
- Input voltage : DC 12 Volts
-
- Adjustable time : Within 10 seconds
-
- Dimension : 77 (L) * 23 (W) * 18 (H) mm (with potentiometer)
-
- Control voltage : AC 0~250V / max. 10A, DC 0~30V / max. 10A
-
- Max. loading : 2200W
-
-
Imax B3AC Lipo Charger | Lithium Lipo RC Battery Balance Charger
Original price was: ₹500.00.₹286.00Current price is: ₹286.00. + GSTAdd to cartSpecification
Input Voltage (V AC) 100 ~ 240 Charge Current Range (A) 3 x 800mA Li-ion/Po cell count 2 ~ 3 Dimensions (mm) LxWxH 95x55x32 Weight (gm) 160 Cable length 0.5m Shipment Weight 0.18 kg Shipment Dimensions 14 ? 10 ? 5 cm -
0.96″ 128 X 64 Blue Light I2C OLED Screen Display Module For DIY
Original price was: ₹211.00.₹166.36Current price is: ₹166.36. + GSTAdd to cart- The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes display board,display, 4 pin male header pre-soldered to board.
- OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
- OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
-
5 mm RGB LED 4 Pin Common Cathode
Original price was: ₹10.00.₹7.38Current price is: ₹7.38. + GSTAdd to cartDiffused RGB Common Anode LED makes some beautiful colors with this diffused 10mm tri-color LED with separate red, green and blue LED chips inside! They make a nice indicator, and fun to color-swirl. We like diffused RGB LEDs because they color mix inside instead of appearing as 3 distinct LEDs.
-
SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port (3.7-4.2V)
Original price was: ₹400.00.₹236.16Current price is: ₹236.16. + GSTRead moreFeatures
- Quad-band 850/900/1800/1900MHz ? connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested).
- Make and receive voice calls using a headset or an external 8? speaker and electret microphone.
- PWM/Buzzer vibration motor control
- AT command interface with ?auto baud? detection
- Send and receive SMS messages.
- Send and receive GPRS data (TCP/IP, HTTP, etc.).
- Scan and receive FM radio broadcasts.
- Lead out buzzer and vibration motor control port.
- AT command interface with ?auto baud? detection.
- Onboard IPEX socket that can be connected to external antenna.
- Breakouts for external 8W speaker and electret mic if you don?t want to use a headphone
- Level shifting circuitry so you can run it with 2.8V to 5V logic.
- Vibrational motor (buzzer) driver so you can have noiseless notifications
- uFL or SMA connections for external antenna
- Indicator LEDs for power and network connectivity
- Standard SIM slides into the back
-
Red LED 10mm
Original price was: ₹10.00.₹4.10Current price is: ₹4.10. + GSTRead moreThis is?10mm Red LED. The size refers to the outside diameter of the LED, with 5mm being the most common LED model. 3mm LEDs are the smallest and used in tight-fitting applications. 8mm and 10mm models are used to output as much light as possible.