LM7905 IC – 5V Negative Voltage Regulator IC
₹15.00 ₹8.20 + GST
The LM7905 series of three terminal? negative regulators are available in TO- IC Data Sheetnd with several fixed output voltages, making them useful in a wide range ?of ?applications. Each type employs internal current limiting, thermal shut down and safe operating area protection, making it essentially indestructible.
36 in stock
Purchase & earn 8 SmartX Rewards Coin!You must be logged in to post a review.
Related products
- Rated 4.48 out of 5
CD4047 CMOS Low Power Monostable/Astable Multivibrator IC DIP-14 Package IC
₹18.00₹13.94 + GSTPurchase & earn 14 SmartX Rewards Coin!Add to cartBuy nowIt requires an external capacitor?(between pins 1 and 3) and an external resistor?(between pins 2 and 3) to determine the output pulse width?in the monostable mode, and the output frequency in the?astable mode. Astable operation is enabled by a high level on the astable?input or low level on the astable input. The output frequency?(at 50% …
CD4047 CMOS Low Power Monostable/Astable Multivibrator IC DIP-14 Package ICRead More
- Rated 4.56 out of 5
Quartz Crystal Oscillator 16MHz HC-49S 2 Pin for TV, car Electronics, PC Card, Electronic Watch, DVD, MP3v
₹15.00₹6.72 + GSTPurchase & earn 7 SmartX Rewards Coin!Add to cartBuy nowCrystal Oscillators are used as a quick and easy way to offer circuits a very accurate and consistent frequency output. This 16 MHz Crystal is a thru-hole type and is typically used with microcontrollers. - Purchase & earn 11 SmartX Rewards Coin!Add to cartBuy now
The?LM386?is a power amplifier designed for use in low voltage consumer applications.
- Purchase & earn 8 SmartX Rewards Coin!Add to cartBuy now
The 4N35 optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. The couplers are Underwriters Laboratories (UL) listed to comply with a 5300 VRMS isolation test voltage.
This isolation performance is accomplished through ?double molding isolation manufacturing process. Comliance to DIN EN 60747-5-2(VDE0884)/ DIN EN 60747-5-5 pending partial discharge isolation specification is available for these families by ordering option 1.
These isolation processes and the ?ISO9001 quality program results in the highest isolation performance available for a commecial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers.
- Purchase & earn 7 SmartX Rewards Coin!Add to cartBuy now
This is a 8MHZ Crystal. This is a low cost crystal oscillator with?oscillation frequency of 8Mhz. Crystal are normally required to provide?clock pulses to your micro controller or other IC’s which require external clock?source.
An oscillator crystal has two electrically conductive plates, with a slice or?tuning fork of quartz crystal sandwiched between them. The crystal oscillator?circuit sustains oscillation by taking a voltage signal from the quartz?resonator, amplifying it, and feeding it back to the resonator. Quartz has the?further advantage that its elastic constants and its size change in such a way?that the frequency dependence on temperature can be very low.
Reviews
There are no reviews yet.