28BYJ-48 Stepper Motor Holder For DIY Projects (Without Stepper Motor) – (160)
✔️ Perfect Fit – Custom-designed for the 28BYJ-48 5V stepper motor
✔️ High-Quality Material – Made from strong and lightweight PLA+ / PETG
✔️ Easy Installation – Pre-drilled mounting holes for quick and secure attachment
✔️ Stable & Vibration-Resistant – Ensures precise motor alignment and smooth operation
✔️ Compact & Lightweight – Ideal for Arduino, CNC, and automation projects
✔️ High-Quality Material – Made from strong and lightweight PLA+ / PETG
✔️ Easy Installation – Pre-drilled mounting holes for quick and secure attachment
✔️ Stable & Vibration-Resistant – Ensures precise motor alignment and smooth operation
✔️ Compact & Lightweight – Ideal for Arduino, CNC, and automation projects
3D Printed Robotic Hand for DIY Projects – 055
- Realistic Finger Movements: Fully articulated joints for precise motion.
- High-Quality 3D Print: Made from durable PLA/PETG for strength and flexibility.
- DIY Assembly: Designed for easy customization and modifications.
- Servo Motor Compatibility: Works with standard servos for automation.
- Open-Source Design: Expandable for advanced robotics projects
Assembly Video 
:
Part 1 : https://youtu.be/vgtJY_rJWzo?si=OycVcdK0dHDjzvfV
part 2 : https://youtu.be/ZXy0Oxoixcg?si=rLJMqxuMCGOOmeKU
Note:We have included the 3D-printed parts and essential electronic components in this kit. However, a few additional items such as hardware and the power supply will need to be purchased locally, depending on your specific project requirements.
Nema 17 3D Printer 2-phase 4-wire Stepper Motor for 1.8Deg 17HD34008-22B
Specification
-
-
- Step Angle : 1.8
- Current/Phase : 1.7 Amp
- Resistance/Phase : 1.65 Ohm
- Inductance/Phase : 3.2 mH
- Holding Torque : 4.0 kg.cm
- No. of Leads : 4
- Detent Torque : 150 g.cm
- Rotor Inertia : 54 g.cm
- Mass : 0.28 Kg
- Temperature Rise : 80Cmax
- Ambient Temperature : -20C~+50C
- Insulation Resistance : 100 MO Min.,500VDC
- Dielectric Strength : 500VAC for 1minute
- Shaft Radial Play : 0.02Max. (450g-load)
- Shaft Axial Play : 0.08Max. (450g-load)
- Max. radial force : 28N (20mm from theflange)
- Max. axial force : 10N
- Motor Length : 40(mm)
-
MG995 (Metal) Gear Servo Motor (180 Rotation)
Features
- The connection cable is thicker.
- Equips high-quality motor.
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
BO Arduino RC Car Chassis Kit – 3D Printed DIY Frame (Electronics & Motor Wheel Not Included) – 061
- Durable 3D Printed Design: Made from high-quality PLA/PETG for strength and longevity.
- Arduino Compatible: Designed to support Arduino-based RC car projects.
- BO Motor Mounts: Pre-cut slots for easy installation of BO motors.
- Easy Assembly: Pre-drilled mounting holes for quick and hassle-free setup.
- Customizable & Expandable: Supports additional sensors and modules.
Gas Sensor Panel Mounted Enclosure For Automation (Sensor not included) – (184)
- Panel Mounted Design: Securely attaches to control panels and enclosures.
- Compatible with Gas Sensors: Fits popular industrial gas sensors.
- 3D Printed Durability: Made from high-quality PETG/PLA for strength and longevity.
- Optimized Ventilation: Designed for accurate gas detection and sensor efficiency.
- Easy Installation: Predefined mounting holes for quick and secure setup
6 rpm – 12V Centre Shaft DC Geared Motor for robotics
Features
- RPM: 6
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 1.2 kg-cm
- No-load current: 60 mA(Max)
- Load current: 300 mA(Max).
- gearbox covered and lubricated with lithium grease
- Requires no maintenance.
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
Specification
| Input Supply Voltage (VDC) | 8.2 ~ 42 |
| Current Handling Capacity (A) | 2.2 |
| Continuous Current (A) | 1.5 (per phase) |
| Logic Input (V) | 2.5 ~ 5 |
| Length (mm) | 15 |
| Width (mm) | 20 |
| Weight (gm) | 4 |
| Shipment Weight | 0.005 kg |
| Shipment Dimensions | 4 4 4 cm |
MG995 Based Door Lock Mechanism (Without Servo Motor)-(033)
✔️ MG995 Servo Motor Powered – Provides strong and reliable locking with precise movement.
✔️ Easy Integration – Compatible with Arduino, Raspberry Pi, and other microcontrollers.
✔️ Low Power Consumption – Operates efficiently with a 5V-7.2V power supply.
✔️ Multiple Control Options – Can be triggered via keypad, RFID, Bluetooth, or WiFi.
✔️ Durable & Lightweight – 3D-printed housing for sturdy and compact design.
✔️ Easy Installation – Pre-drilled mounting holes for quick and secure setup.
✔️ Easy Integration – Compatible with Arduino, Raspberry Pi, and other microcontrollers.
✔️ Low Power Consumption – Operates efficiently with a 5V-7.2V power supply.
✔️ Multiple Control Options – Can be triggered via keypad, RFID, Bluetooth, or WiFi.
✔️ Durable & Lightweight – 3D-printed housing for sturdy and compact design.
✔️ Easy Installation – Pre-drilled mounting holes for quick and secure setup.
16X2 LCD Case With Nuts – (LCD Not Included) – 002
- Precision-fit PLA+ case for 16X2 LCD displays (*LCD not included).
- Dimensions: L x W x H = 8.6cm x 4.2cm x 2cm.
- Lightweight, durable, and easy to assemble with included nuts.
- Ideal for electronics, robotics, and educational projects in India.
- Quality-tested, made in India, and optimized for reliability.
3D-Printed Hydro Hydro Power Generator Kit – DIY Renewable Energy Project – 095
✔️ Complete DIY Kit – Includes a 3D-printed hydro turbine, waterwheel mount, LED, and wires.
✔️ Real-Time Power Generation – Generates electricity using flowing water and lights up an LED.
✔️ 3D-Printed Components – Durable and lightweight design made for educational demonstrations.
✔️ Educational & Fun – Perfect for STEM education, school projects, and science exhibitions.
✔️ No Battery Needed – 100% powered by water, promoting eco-awareness and clean energy.
✔️ Simple Assembly – Easy to put together, suitable for beginners and students.
✔️ Real-Time Power Generation – Generates electricity using flowing water and lights up an LED.
✔️ 3D-Printed Components – Durable and lightweight design made for educational demonstrations.
✔️ Educational & Fun – Perfect for STEM education, school projects, and science exhibitions.
✔️ No Battery Needed – 100% powered by water, promoting eco-awareness and clean energy.
✔️ Simple Assembly – Easy to put together, suitable for beginners and students.
Rack and Pinion (For MG995 Motor) For Robotics Projects+ Servo Motor Included (Rack Length 285mm) – 027
- Color: Unique due to 3D printing, color may vary.
- Material: Strong and lightweight PLA (Polylactic Acid).
- Rack Size: 285 mm – optimized for precise linear motion.
- Compatibility: Specifically designed for MG995 servo motors.
- Precision Design: Smooth operation with minimal backlash.
- Mounting: Includes mounting holes for effortless integration.
- Applications: Robotics, CNC machines, automation systems, prototyping, and educational projects.