12V Single Channel Relay Module
NEO-6M GPS Module with EPROM
- This is a complete GPS module that is based on the NEO 6M GPS. This unit uses the latest technology to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.
- The GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-centre software for configuring the GPS and changing the settings and much more. It is really good software (see link below).
DS1307 Real Time Clock (RTC) I2C IIC Module AT24C32 without Battery
This is Tiny RTC Real Time Clock DS1307 I2C IIC Module for Arduino. It contains a DS1307 real-time clock IC with a backup battery. Its one of the easiest to use RTCs out there, with Arduino and other libraries or simply use I2C commands to set and retrieve the time and date. Includes a lithium coin cell battery which should be good forfour yearsat least. Perfect for use in various electronics projects in India, DS1307 Real Time Clock (RTC) I2C IIC Module AT24C32 without Battery ensures reliability and performance. Ideal for various electronics projects, DS1307 Real Time Clock (RTC) I2C IIC Module AT24C32 without Battery offers quality and performance.
Raspberry Pi Pico Board Enclosure (Plastic Parts only) (* Pico Board Not Included) – 028
- Compactible with Raspberry Pi Pico Board (*Pico Board Not Included)
- L x W x H = 1.2cm x 5.8cm x 3.1cm
- Material: PLA+
- We are a Make in India Company.
- All products are quality tested before shipping.
ESP-12E ESP8266 WIFI Module
Features :
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as an application processor
- SDIO 1.1 / 2.0, SPI, UART
- STBC, 11 MIMO, 21 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- Access Point and Station Modes.
ST Link V2 Programmer For STM8 and STM32
nan Perfect for use in various electronics projects in India, PZIN51000043 Imported St-Link V2 Programming Unit Mini Metal Shell Stm8 Stm32 Emulator Dow ensures reliability and performance. Ideal for various electronics projects, PZIN51000043 Imported St-Link V2 Programming Unit Mini Metal Shell Stm8 Stm32 Emulator Dow offers quality and performance.
TB6600 4 Ampere Stepper Motor Driver for 16 Micro-Step CNC 1 Axis
nan Perfect for use in various electronics projects in India, TB6600 4 Ampere Stepper Motor Driver for 16 Micro-Step CNC 1 Axis ensures reliability and performance. Ideal for various electronics projects, TB6600 4 Ampere Stepper Motor Driver for 16 Micro-Step CNC 1 Axis offers quality and performance.
Multicolor ID Name Keyrings & Keychains Key Tags with Label
1240 12V Solenoid Door Lock
Features:
- Iron Body Material
- High-quality ultra-compact lock.
- Rustproof, durable, safe, and convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
- Slim design, security, and stability, low power consumption
- Designed with the open frame type and mount board, high power.
- Easy to install for the door lock or other automatic door lock systems with the mounting board.
- Adopts the principle of magnetism, when the current is through the silicon, the electromagnetic lock will achieve a strong.
MAX30102 Pulse Oximeter Heart Rate Sensor Module
Features
- Integrated pulse oximetry and heart rate monitor sensor solution.
- Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End
- Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package
- Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
- Programmable Sample Rate and LED Current for Power Savings
- Ultra-Low Shutdown Current (0.7A, typ)
- Advanced Functionality Improves Measurement Performance
- High SNR Provides Robust Motion Artifact Resilience
- Integrated Ambient Light Cancellation
- High Sample Rate Capability
- Fast Data Output Capability
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
Specification
| Driver IC | TM1637 |
| Input Voltage (V) | 3.3 to 5.5 |
| Max. Operating Current (mA) | 30 |
| Length (mm) | 42 |
| Width (mm) | 24 |
| Height (mm) | 12 |
| Weight (gm) | 10 |
| Shipment Weight | 0.015 kg |
| Shipment Dimensions | 5 3 2 cm |
FS1000A 433mHz Tx & Rx RF Radio Module
This is FS1000A 433mHz Tx RF Radio Module. This RF module comprises an RF Transmitter and an RF Receiver. The transmitter/receiver (Tx/Rx) pair operates at a frequency of 433 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4. Perfect for use in various electronics projects in India, FS1000A 433mHz Tx & Rx RF Radio Module ensures reliability and performance. Ideal for various electronics projects, FS1000A 433mHz Tx & Rx RF Radio Module offers quality and performance.