Reed Switch Sensor Module
Features:-
- Open reed switch
- Working voltage: 3.3V ~ 5V
- Current: Upto 1.2A
- Comparator output, clean signal, great waveform, and strong driving ability
- Digital switch output (0 and 1)
- Fixed bolt hole for easy installation
ADS1115 16-Bit I2C ADC 4-Channel Programmable Gain Amplifier Module
Features
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
- It has an Internal low-drift voltage reference
- Internal Oscillator.
- Internal PGA.
- I2C INTERFACE : Pin-Selectable Addresses.
- Four single ends Or Two differential inputs.
2 Channel 5V SSR Solid State Relay Module
Features
- 2 channel 2 AMP Solid State Relay board
- Control 2 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
Force Sensor – 39.1mm
- This is a Force sensitive resistor with a square, 1.75x1.5",sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lowerthe resistance. When no pressure is being applied to the FSR its resistance will be larger than 1M. This FSR can sense applied force anywhere in the range of 100g-10kg.
- Two pins extend from the bottom of the sensor with 0.1" pitch making it bread board friendly. There is a peel-and-stick rubber backing on the other side of the sensing area to mount the FSR.
- Just Connect a resistor to form a voltage divider and measure the voltage at the junction to find the force applied. These sensors are simple to set up and great for sensing pressure, but they aren't incredibly accurate. Use them to sense if it's being squeezed, but you may not want to use it as a scale.
Solar Panel Charger Controller Battery Dual USB LCD Display Regulator (Blue)
nan Perfect for use in various electronics projects in India, Solar Panel Charger Controller Battery Dual USB LCD Display Regulator (Blue) ensures reliability and performance. Ideal for various electronics projects, Solar Panel Charger Controller Battery Dual USB LCD Display Regulator (Blue) offers quality and performance.
8A 200W DC-DC Step Down Buck Converter Power Supply Board
MIC29302 – (SMD TO-263 Package) – LDO Voltage Regulator
8 Channel Isolated 12V Relay Module opto coupler For Arduino PIC AVR DSP ARM
Specification
- This relay module is 5 Volts active low.
- It is an 8-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
- It is also able to control various appliances and other equipments with large current.
- Relay output maximum contact is AC250V 10A and DC30V 10A.
- Standard interface can be directly connected with microcontrollers.
- Red working status indicator lights are conducive to the safe use.
- Widely used for all MCU control, industrial sector, PLC control, smart home control.
- Input port IN1, IN2, IN3, IN4, IN5, IN6, IN7, IN8 low signal level effectively.
- VCC, GND : Input power.
- JD - VCC : Relay power input port,relay can power alone.
- Working voltage : 5V
- Module weight : about 112g
- package weight : about 150g
- module size : about 1.7cm X 5.5cm X 13.7cm(height * width * long)
10nF 50V 10% 0603 X7R MLCC Multilayer Ceramic Capacitor SMD – CC0603KRX7R9BB103
This is a 10nF 50V Multi Layered Ceramic Capacitor in SMD 1206 Package. It has X7R as dielectric, which makes up a highly stable capacitor. It has tolerance of 10% only. Its also denoted as 0.01uF.
This is a 10nF 50V Multi Layered Ceramic Capacitor in SMD 1206 Package. It has X7R as dielectric, which makes up a highly stable capacitor. It has tolerance of 10% only. Its also denoted as 0.01uF. Perfect for use in various electronics projects in India, 10nF 50V 10% 0603 X7R MLCC Multilayer Ceramic Capacitor SMD - CC0603KRX7R9BB103 ensures reliability and performance. Ideal for various electronics projects, 10nF 50V 10% 0603 X7R MLCC Multilayer Ceramic Capacitor SMD - CC0603KRX7R9BB103 offers quality and performance.
TDA2003 ST/OG TO-220-5 Transistors 10W Audio Amplifier
27pf 50V Ceramic Capacitor
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications Perfect for use in various electronics projects in India, 0.000027uf/0.027nf/27pf 50V Ceramic Capacitor ensures reliability and performance. Ideal for various electronics projects, 0.000027uf/0.027nf/27pf 50V Ceramic Capacitor offers quality and performance.
Sw-520 Tilt Sensor Relay Module 12V Device Tilt Dump Protection Alarm
- TILT SENSOR MODULE is a device used for knowing the planar movement. Although they are available in various types their basic function remains the same. Their function is to detect the plane shift from horizontal to vertical and sent of a signal when it happens. There are modules which could sense even small plane shifts but here we are going to discuss about simple contact type TILT SENSOR module. Here we are going to use SW-520D TILT SENSOR MODULE.
- We have Various sizes of Sensor Modules. Check out our complete collection of Sensor Modules