EMG Muscle Sensor Module
Features of AD8232 ECG Monitor Sensor Module:-
- Operating Voltage - 3.3V
- Analog Output
- Leads-Off Detection
- Shutdown Pin
- LED Indicator
- 3.5mm Jack for Biomedical Pad Connection or Use 3 pin header
DC 3-5V Temperature Sensor Thermocouple Sensor for Arduino
Features of KY 028 NTC Temprature Sensor Module
- NTC Thermistor sensor
- LM393 voltage comparator
- Mounting hole for easy installation
- Adjustable threshold via potentiometer
Specifications ofNTC Temprature Sensor Module
- Operating Voltage : 3.3 to 5 Volts
- Output Current : 15 mA
- Output Type : Digital (HIGH OR LOW)
8051 / AT89S52 /AT89S52-24pu at89s52 dip-40 atmel microcontroller chip ic
Features:
- 8K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 256 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
Ne555 12V Digital Timer Relay Module Switch | Adjustable 0 To 10 Seconds
Specifications
-
- Module Properties : NE555 chip
-
- Input voltage : DC 12 Volts
-
- Adjustable time : Within 10 seconds
-
- Dimension : 77 (L) * 23 (W) * 18 (H) mm (with potentiometer)
-
- Control voltage : AC 0~250V / max. 10A, DC 0~30V / max. 10A
-
- Max. loading : 2200W
DRV8833 2 Channel DC Motor Driver
Features:
- Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
- Operating voltage: 2.7V to 10.8V
- Output current: 1.2A continuous (2A peak) per motor
- Motor outputs can be paralleled to deliver 2.4A continuous (4A peak) to a single motor
- Inputs are 3V- and 5V-compatible
- Under-voltage lockout and protection against over-current and over-temperature
- Reverse-voltage protection circuit
- Current limiting can be enabled by adding sense resistors (not included)
DC Crocodile Alligator Clip Black and Red Pair
80R280 MOSFET
1 x 18650 Battery Holder
Features :
- There are slots on the edge of the holder to combine them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
ULN2803 IC – (SMD Package) – 8 Darlington Transistor Arrays IC
Features:-
- Output current (single output) 500 mA (max)
- High sustaining voltage output 50 V (min)
- Output clamp diodes
- Inputs compatible with various types of logic.
- Package Type−APG : DIP−18pin
HX711 Load Cell Amplifier Module
1500 ohm , 1.5k 100w variable resistor ceramic rheostat -Load Bank
2.4 Inch TFT Touch LCD Display Crystal Clear Visualization
2.4 Inch Touch Screen TFT Display Shield adds a touch up to your Arduino project with a beautiful large touchscreen display shield with built-in microSD card connection. This TFT display is big (2.4 diagonal) bright and colorful! 240320 pixels with individual pixel control. It has way more resolution than a black and white 12864 display. Perfect for use in various electronics projects in India, 2.4 Inch Touch Screen TFT Display Shield for Arduino UNO Mega | 2.4 Inch TFT Display with Stylus Pen ensures reliability and performance. Ideal for various electronics projects, 2.4 Inch Touch Screen TFT Display Shield for Arduino UNO Mega | 2.4 Inch TFT Display with Stylus Pen offers quality and performance.