NRF24L01 2.4GHz Wireless Transceiver Module
- Has on board antenna. The nRF24L01 is a single chip 2.4GHz transceiver with an embedded baseband protocol engine (Enhanced ShockBurst), designed for ultra low power wireless applications.
- The nRF24L01 is designed for operation in the world wide ISM frequency band at 2.400 - 2.4835GHz. An MCU (microcontroller) and very few external passive components are needed to design a radio system with the nRF24L01. The nRF24L01 is configured and operated through a Serial Peripheral Interface (SPI.) Through this interface the register map is available. The register map contains all configuration registers in the nRF24L01 and is accessible in all operation modes of the chip.
- The embedded baseband protocol engine (Enhanced ShockBurst) is based on packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Internal FIFOs ensure a smooth data flow between the radio front end and the systems MCU. Enhanced ShockBurst reduces system cost by handling all the high-speed link layer operations. The radio front end uses GFSK modulation. It has user configurable parameters like frequency channel, output power and air data rate.
- DNA Solutions has large collection of various types of Transceiver Module. Check our complete collection of Transceiver Module
15pf 50V ceramic Capacitor
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications Perfect for use in various electronics projects in India, 15pf 50V ceramic Capacitor ensures reliability and performance. Ideal for various electronics projects, 15pf 50V ceramic Capacitor offers quality and performance.
200k Single Turn Potentiometer
12-0-12 2A Center Tapped Step-down Transformer (230v)
12-0-12 2A Center Tapped Step Down Transformer is a general purpose chassis mounting mains transformer. Transformer has 230V primary winding and center tapped secondary winding. The transformer has flying colored insulated connecting leads ( Approx 100 mm long ). The Transformer act as step down transformer reducing AC - 230V to AC - 12V. Perfect for use in various electronics projects in India, 12-0-12 2A Center Tapped Step-down Transformer (230v) ensures reliability and performance. Ideal for various electronics projects, 12-0-12 2A Center Tapped Step-down Transformer (230v) offers quality and performance.
Pulley Wheel 7 x 2 Cm For DC Gear Motors
Feature and specifications:
- Width of pulley : 2 cm
- Diameter of pulley : 7 cm
14V 5W 1N5351B Zener Diode
ESP-12E ESP8266 WIFI Module
Features :
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as an application processor
- SDIO 1.1 / 2.0, SPI, UART
- STBC, 11 MIMO, 21 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- Access Point and Station Modes.
2.4G NRF24L01 WIRELESS MODULE WITH ANTENNA
SN74LS47N BCD to 7-Segment Decoder/Driver IC (7447 IC) Package-DIP-16
7447 or 74LS47 decodes BCD into 7 Segments, which means it accepts a binary coded decimal or BCD Values as input and decoded into a pattern that drives a 7-segment for displaying digits 0 to 9, so its name is BCD to 7 segment driver or decoder. Its input is 4 lines BCD data and generates complements as output. The generation of complement data of BCD is internally so no coding or programming is required to generate it.
40TPS12 Thyristor Transistor
SCR Thyristors are Current Operated Devices, a Small Gate Current Controls a Larger Anode Current.
• Thyristors are High Speed Switches that Can be Used to Replace Electromechanical Relays in Many Circuits.
• Thyristor is a Four Layer (P-N-P-N) Semiconductor Device that Contains Three PN Junctions in Series.
• Easy Installation By Its Miniature Size and Thin Electrode Leads, Low Cost. Perfect for use in various electronics projects in India, 40TPS12 Thyristor Transistor ensures reliability and performance. Ideal for various electronics projects, 40TPS12 Thyristor Transistor offers quality and performance.
