3 x 4 inch zero pcb board for General Purpose Prototype
Solar Panel 12 Volt 10 Watt
Specification
- Voltage: 12 Volts
- Current: 0.8334 Amp
- Power: 10 Watt
- Size: 35 cm x 30 cm x 2.5 cm
100K Ohm 3Pin Shaft Potentiometer
It is a 100K Ohm 3Pin 15mm Shaft Potentiometer. This is used for adjusting various parameters like voltage, current, etc in an electronic circuit. Perfect for use in various electronics projects in India, 100K Ohm 3Pin Shaft Potentiometer ensures reliability and performance. Ideal for various electronics projects, 100K Ohm 3Pin Shaft Potentiometer offers quality and performance.
BD140 – 80V ,1.5A NPN power Transistor voltage regulator
50K Multiturn Potentiometer
LM393 Photosensitive LDR Light-Dependent Control Sensor Module
ThisLM393 Photosensitive Light Dependent Sensor Moduleis using a high-quality LM393voltage comparator. Easy to install using the sensitive type photosensitive resistance sensor thecomparator output signal gives a clean and good waveform. Perfect for use in various electronics projects in India, LDR Light Sensor Module Photosensitive Based on LM393 for Arduino and Other MCU ensures reliability and performance. Ideal for various electronics projects, LDR Light Sensor Module Photosensitive Based on LM393 for Arduino and Other MCU offers quality and performance.
10pf 50V ceramic Capacitor
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications Perfect for use in various electronics projects in India, 10pf 50V ceramic Capacitor ensures reliability and performance. Ideal for various electronics projects, 10pf 50V ceramic Capacitor offers quality and performance.
68 ohm Resistor – 1/4 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 68 ohm Resistor - 1/4 Watt ensures reliability and performance. Ideal for various electronics projects, 68 ohm Resistor - 1/4 Watt offers quality and performance.
HC-SR501 PIR Sensor Infrared IR Body Motion Module
PIR Sensor is also called as Motion Sensor or Movement Sensor or is basically a Passive Infrared Sensor.
It is a pyroelectric device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single I/O pin. It detect the motion by detecting the changes in the IR levels emitted from the object.It can be used as motion detector for security systems or robotics. Perfect for use in various electronics projects in India, HC-SR501 PIR Sensor Infrared IR Body Motion Module ensures reliability and performance. Ideal for various electronics projects, HC-SR501 PIR Sensor Infrared IR Body Motion Module offers quality and performance.
1nf (102) 50V Ceramic Capacitor
A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications Perfect for use in various electronics projects in India, 0.001uf/1nf/1pf 50V Ceramic Capacitor ensures reliability and performance. Ideal for various electronics projects, 0.001uf/1nf/1pf 50V Ceramic Capacitor offers quality and performance.
0.96″ 128 X 64 Blue Light I2C OLED Screen Display Module
- The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64. The package includes display board,display, 4 pin male header pre-soldered to board.
- OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
- OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
100uF 35V Electrolytic Capacitors
A capacitor (originally known as a condenser) is a passive two-terminal electrical component used to store energy electrostatically in an electric field. The forms of practical capacitors vary widely, but all contain at least two electrical conductors (plates) separated by a dielectric (i.e., insulator). Perfect for use in various electronics projects in India, Aluminum Electrolytic Capacitors - 35volts 100uF ensures reliability and performance. Ideal for various electronics projects, Aluminum Electrolytic Capacitors - 35volts 100uF offers quality and performance.