1M ohm Resistor – 2 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 1M ohm Resistor - 2 Watt ensures reliability and performance. Ideal for various electronics projects, 1M ohm Resistor - 2 Watt offers quality and performance.
RFID-RC522 RF IC Card Reader Sensor Module
RFID (radio frequency identification) systems use data strings stored inside RFID tags or transponders) to uniquely identify people or objects when they are scanned by an RFID reader. Because passive tags require a strong RF field to operate, their effective range is limited to an area in close proximity to the RFID reader. Perfect for use in various electronics projects in India, RFID RC522 13.56 MHZ Reader/Writer SPI S50 Card and Keychain ensures reliability and performance. Ideal for various electronics projects, RFID RC522 13.56 MHZ Reader/Writer SPI S50 Card and Keychain offers quality and performance.
LM393 Photosensitive LDR Light-Dependent Control Sensor Module
ThisLM393 Photosensitive Light Dependent Sensor Moduleis using a high-quality LM393voltage comparator. Easy to install using the sensitive type photosensitive resistance sensor thecomparator output signal gives a clean and good waveform. Perfect for use in various electronics projects in India, LDR Light Sensor Module Photosensitive Based on LM393 for Arduino and Other MCU ensures reliability and performance. Ideal for various electronics projects, LDR Light Sensor Module Photosensitive Based on LM393 for Arduino and Other MCU offers quality and performance.
4N60 -4A 600V- FQPF4N60 4N60 N-Channel MOSFET 600V TO-220F NEW
Features
Low gate charge ( typical 16nC) Fast switching 100% avalanche tested Improved dv/dt capability Perfect for use in various electronics projects in India, 4N60 -4A 600V- FQPF4N60 4N60 N-Channel MOSFET 600V TO-220F NEW ensures reliability and performance. Ideal for various electronics projects, 4N60 -4A 600V- FQPF4N60 4N60 N-Channel MOSFET 600V TO-220F NEW offers quality and performance.
47 ohm Resistor – 1/4 Watt
A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.
(Note: Product Images are shown for illustrative purposes only and may differ from actual product.) Perfect for use in various electronics projects in India, 47 ohm Resistor - 1/4 Watt ensures reliability and performance. Ideal for various electronics projects, 47 ohm Resistor - 1/4 Watt offers quality and performance.
1N4148 Surface Mount Zener Diode
Resistor 39K Ohms 1% 1/8W SMD 0805
HC-SR501 PIR Sensor Infrared IR Body Motion Module
PIR Sensor is also called as Motion Sensor or Movement Sensor or is basically a Passive Infrared Sensor.
It is a pyroelectric device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single I/O pin. It detect the motion by detecting the changes in the IR levels emitted from the object.It can be used as motion detector for security systems or robotics. Perfect for use in various electronics projects in India, HC-SR501 PIR Sensor Infrared IR Body Motion Module ensures reliability and performance. Ideal for various electronics projects, HC-SR501 PIR Sensor Infrared IR Body Motion Module offers quality and performance.
1uF 50V Multi Layered Ceramic Capacitor (MLCC) SMD 0805
Flame Sensor Infrared Receiver Module Ignition Source Detection Module
Specification:
-
- Can detect a flame or in a 760 nanometer wavelength of ~ 1100 nm range of the light, lighter flame test distance of 80cm, for the greater flame, the farther the distance test
-
- The detection angle of 60 degrees or so, particularly sensitive to the flame spectrum
-
- Sensitivity adjustable (shown in blue digital potentiometer adjustment)
-
- The comparator output signal clean, good waveform, driving ability, more than 15mA
-
- With adjustable precision potentiometer sensitivity adjustment
-
- The working voltage of 3.3V-5V
-
- The output format : DO digital switching outputs (0 and 1) and AO analog voltage output
-
- A fixed bolt holes for easy installation
-
- Using a wide voltage LM393 comparator
0.96″ 128 X 64 Blue Light I2C OLED Screen Display Module
- The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64. The package includes display board,display, 4 pin male header pre-soldered to board.
- OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
- OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electro luminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.
100K Ohm 3Pin Shaft Potentiometer
It is a 100K Ohm 3Pin 15mm Shaft Potentiometer. This is used for adjusting various parameters like voltage, current, etc in an electronic circuit. Perfect for use in various electronics projects in India, 100K Ohm 3Pin Shaft Potentiometer ensures reliability and performance. Ideal for various electronics projects, 100K Ohm 3Pin Shaft Potentiometer offers quality and performance.