Welcome to Smartxprokits| Get Flat 5% Use code- *FLAT5* and Free delivery on orders above Rs 900.

Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop

Category: Battery/Charger Accessories

Battery/Charger Accessories

Showing all 16 results

  • Application of 18650 Holder

    • You can use this case with your own battery to form power system supply.
    • Case for rechargeable battery.
    • Simple DIY recharge power supply
    Add to cart
  • 18650 Battery Holder, Battery Holder Case Wire Leads

    40.05

    Specification

      • This item is Battery Box Holder for 2 Battery
      • DIY power supply
      • Easy installation
      • 18650 Battery Holder Case with connecting wire.
      • Rivet Material : Nickel-plated Brass
      • Plastic Material : Environmental protection pp
      • Exposed wire length : Aprrox.100mm
      • Color : Black
      • Style : 1pcs

     

    Add to cart
  • 3.7V 650mAH (Lithium Polymer) Lipo Rechargeable Battery for RC Drone

    Add to cart
  • A lithium-ion battery or Li-ion battery is a type of rechargeable battery. Lithium-ion batteries are commonly used for portable electronics and electric vehicles and are growing in popularity for military and aerospace applications.

    Add to cart
  • 3.7V 650mAH (Lithium Polymer) Lipo Rechargeable Battery for RC Drone

    Add to cart
  • 3S 25A Lithium Ion BMS – For 11.1V Battery

    237.77

    Specifications

    • Charging Voltage: 12.6V DC CC/CV
    • Balance Voltage for Single Cell: 4.2V
    • Max Continuous Charge/Discharge Current: 25A
    • Overcharge Detection Voltage: 4.25V
    • Overcharge Release Voltage: 4.15V
    • Over Discharge Detection Voltage: 2.3V
    • Over Discharge Release Voltage: 3.0V
    • OverCurrent Detection Current: 35 A
    • External Short Circuit Detection
    • Automatic Recovery on release of fault condition
    Add to cart
  • This 4 x 1.5V AAA Battery Holder can hold 4 1.5V AAA battery which can make 6 V rechargeable battery pack from NiMH / NiCd cells or 6 V battery pack from alkaline cells or it can also be used for one-time use and throw batteries for small DIY projects. The battery holder puts the batteries in series so that you have 4x the voltage of an AAA battery. (approx. 6V)

    Add to cart
  • Features :

    • High reliability, low cost and compact size.
    • LED Flash for low charge warning.
    • Memory option to recall quantity of electricity.
    • Specifically designed to monitor the power level of battery while charging or discharging.
    • Provides instant battery status to permit effective management of the charging.
    • Display of 4 segment LED bar graph.
    • Easy to install and operate.
    • Easy to install and operate.
    Add to cart
  • Specification

    • Voltage – 12v Capacity
    • 7.4Ah Connection4.8mm blade
    • Dimension – 65*95*151mm
    • Weight- 2.17kg
    Add to cart
  • This is Horizontal type CR2032 Battery holder also called as coin cell battery holder. It is basic 20mm coin cell holder. Holds the common CR2032 type batteries.

    Add to cart
  • This is General purpose 9V Original HW marked Non-Rechargeable Battery for all your project and application needs. As we experienced the use of this battery in our testing lab for various purpose, we can assure you the best quality, long life and genuineness of this battery among all options available in the market at this cost.

    Add to cart
  • Specification

    Input Voltage (V AC)100 ~ 240
    Charge Current Range (A)3 x 800mA
    Li-ion/Po cell count2 ~ 3
    Dimensions (mm) LxWxH95x55x32
    Weight (gm)160
    Cable length0.5m
    Shipment Weight0.18 kg
    Shipment Dimensions14 × 10 × 5 cm
    Add to cart
  • Specifications:

    Input Voltage (V AC)100 ~ 240
    DC Input Voltage Range (V)11 ~ 18
    Charge Current Range (A)0.1 ~ 5
    Discharge Current Range (A)0.1 ~ 1.0
    Drain Current for Balancing Li-Po’s (mA/Cell)300
    Li-ion/Po cell count1 ~ 6
    NiCd/NiMH cell count1 ~ 15 Cells
    Pb battery voltage2 ~ 20
    Dimensions (mm) LxWxH133 x 87 x 33
    Weight (gm)624
    PowerDischarge: 80w(new version)
    Charge: 10W(new version)
    Add to cart
  • Specification

      • High energy density
      • Capacity, resistance, Voltage, platform time consistency is good.
      • Good consistency and low self-discharge.
      • Very Small in size and weight when compared with Ni-Cd, Ni-MH, and Lead Acid Batteries
      • Full Charge in 40 to 90 minutes depending upon the special charger
      • Long life with full capacity for up to 500 charge cycles
      • 2 x Li-ion 7.4V 2000mAh cells (2S1P)
      • Inbuilt (BMS) battery protection circuit
      • The battery will work within a voltage range of 7.2 to 8.4v.
      • The BMS will cut off the battery at approx. 5 V to prevent over-discharging.
      • The maximum safe charging current is 7000 mA.
      • The recommended charging current is a maximum of 1000mA for longer life
      • High performance and capacity
      • Flat top to suit many devices fitting.

     

    Add to cart
  • Orange 2200mAh 3S 30C/60C Lithium polymer battery Pack (LiPo)

    1,549.00

    The Orange 3S 30C/60C 2200mAh battery Pack (LiPo) are available with heavy-duty discharge leads; above all to minimize resistance and sustain high current loads. Orange batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is available with plating of gold on connectors and JST-XH style balance connectors. The assembling of all Orange Lithium Polymer battery packs is done using IR match cells, in addition, to provide high reliability.

    Read more
    • This TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.
    • Furthermore when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.
    • Manufactured under fully machinery processing.  so it has high reliability for the best performance. In conclusion, it is special design for a single lithium battery charging. TP4056 Other features include the current monitor, under voltage lockout, automatic recharge, and two status pin to indicate charge termination and the presence of an input voltage.
    • Using the module:
    1. Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
    2. Connect cell to charge to B+/B- pads on the right-hand side of the module.
    3. A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
    4. Important! Disconnect load when charging
    5. The red LED indicates charging in progress, green LED indicates charging has finished.
    6. Never charge your battery at a rate greater than 1C.
    Add to cart

Cart

Your Cart is Empty

Back To Shop
Open chat