Category: Battery/Charger Accessories
Battery/Charger Accessories
Showing 1–16 of 20 results
1 x 18650 Battery Holder
₹8.00 + GSTAdd to cartBuy nowFeatures :
- There are slots on the edge of the holder to combine them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
11.1V 2600MAH Lithium-ION Rechargeable Battery
₹520.00 + GSTAdd to cartBuy nowSmall in size and weight compared to Ni-Cd, Ni-MH, and Lead Acid Batteries and Very High in Power. Long life with full capacity for up to 1000~1500 Approx charge cycles BMS Protection Maximum Capacity – 2600 ah 3 months Warranty against Manufacturing Defects Only.
18650 Battery Holder – 2 CELL
₹26.00 + GSTAdd to cartBuy nowHolds two 18650 batteries. Easy install, convenient to use. High-quality plastic material.
18650 Battery Holder for 1 Battery
₹17.35 + GSTAdd to cartBuy nowApplication of 18650 Holder
- You can use this case with your own battery to form power system supply.
- Case for rechargeable battery.
- Simple DIY recharge power supply
1Kg Load cell – Electronic Weighing Scale Sensor
₹114.00 + GSTAdd to cartBuy now- A load cell is a transducer that is used to create an electrical signal whose magnitude is directly proportional to the force being measured. The various types of load cells include hydraulic load cells, pneumatic load cells and strain gauge load cells.
- This is a standard load cell for measuring weight upto 1 Kg. The output of the load cell is in mili-volts and cannot be directly measured by a micro-controller. So an ADC with high resolution or an instrumentation amplifier is required to make the output of the load cell readable to a micro-controller.
- Add to cartBuy now
Model Name/Number 18650 2000mAh Use Power Saver Voltage 3.7V Battery Capacity 2000mAh Size 18*63 Battery Type Lithium-Ion Usage/Application Solar Light / General Purpose
- Add to cartBuy now
The 3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 20A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter.(if the cooling environment is not good, please …
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6VRead More
- Add to cartBuy now
A lithium-ion battery or Li-ion battery is a type of rechargeable battery. Lithium-ion batteries are commonly used for portable electronics and electric vehicles and are growing in popularity for military and aerospace applications.
3S 25A Lithium Ion BMS ? For 11.1V Battery
₹130.38 + GSTAdd to cartBuy nowSpecifications
- Charging Voltage: 12.6V DC CC/CV
- Balance Voltage for Single Cell: 4.2V
- Max Continuous Charge/Discharge Current: 25A
- Overcharge Detection Voltage: 4.25V
- Overcharge Release Voltage: 4.15V
- Over Discharge Detection Voltage: 2.3V
- Over Discharge Release Voltage: 3.0V
- OverCurrent Detection Current: 35 A
- External Short Circuit Detection
- Automatic Recovery on release of fault condition
- Add to cartBuy now
This 4 x 1.5V AAA Battery Holder can hold 4 1.5V AAA battery which can make 6 V rechargeable battery pack from NiMH / NiCd cells or 6 V battery pack from alkaline cells or it can also be used for one-time use and throw batteries for small DIY projects. The battery holder puts the batteries in series so that you have 4x the voltage of an AAA battery. (approx. 6V)
- Add to cartBuy now
Features :
- High reliability, low cost and compact size.
- LED Flash for low charge warning.
- Memory option to recall quantity of electricity.
- Specifically designed to monitor the power level of battery while charging or discharging.
- Provides instant battery status to permit effective management of the charging.
- Display of 4 segment LED bar graph.
- Easy to install and operate.
- Easy to install and operate.
- Add to cartBuy now
Specification
- Voltage – 12v Capacity
- 7.4Ah Connection4.8mm blade
- Dimension – 65*95*151mm
- Weight- 2.17kg
Battery Holder for AA Battery 2 Cells
₹15.00 + GSTAdd to cartBuy nowThis is a Black Plastic Storage Box Case for 2 x AA Battery Cells, without Cover. The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for devices that need a 3V external battery
battery snap connector
₹15.60 + GSTAdd to cartBuy nowFeatures :
- Excellent material
- Fine workmanship
- It is an environmental 9V battery buckle
- T- Fonts, with red and black connecting lines
- Save Power and Protect the environment
- Good electrical conductivity and comfortable sense of touch
- Add to cartBuy now
This is Horizontal type CR2032 Battery holder also called as coin cell battery holder. It is basic 20mm coin cell holder. Holds the common CR2032 type batteries.
- Add to cartBuy now
This is General purpose 9V Original HW marked Non-Rechargeable Battery for all your project and application needs. As we experienced the use of this battery in our testing lab for various purpose, we can assure you the best quality, long life and genuineness of this battery among all options available in the market at this cost.
Products
-
80R280 MOSFET ₹91.00 + GST -
55n60nd mosfet ₹266.50 + GST -
Big Buzzer ₹36.00 + GST -
2CH 27MHZ without Antenna -
12x12x15mm Tactile Push Button Switch ₹10.80 + GST